Truper ENNE-160, Manwal tal-Utent tal-Istapler Pnewmatiku tal-Gauge 16

Introduzzjoni

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Truper ENNE-160 16 Gauge Pneumatic Stapler. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

Figure 1: Truper ENNE-160 16 Gauge Pneumatic Stapler, side view.

Informazzjoni dwar is-Sigurtà

Dejjem segwi l-prekawzjonijiet bażiċi ta’ sigurtà meta tuża għodda tal-enerġija biex tnaqqas ir-riskju ta’ nar, xokk elettriku, u korriment personali. Żomm dan il-manwal għal referenza futura.

• Ilbes Protezzjoni tal-Għajnejn: Dejjem ilbes nuċċalijiet jew gogils tas-sigurtà biex tipproteġi ruħek kontra debris li jtir.
• Ilbes Protezzjoni tas-Smigħ: Prolonged exposure to noise from pneumatic tools can cause hearing damage.
• Skonnettja l-Provvista tal-Arja: Dejjem skonnettja l-provvista tal-arja qabel ma tagħmel aġġustamenti, tneħħi imblukkar, jew twettaq manutenzjoni.
• Żomm iż-Żona tax-Xogħol Ċara: Ensure your work area is well-lit and free of clutter.
• Biċċa tax-Xogħol Sikura: Always secure the material you are working on to prevent movement.
• Never Point at People: Never point the tool at yourself or others, even if it is not connected to an air supply.
• Uża l-Pressjoni tal-Arja Korretta: Operate the tool within the specified air pressure range (75-110 PSI).
• Spezzjona l-Għodda Qabel l-Użu: Check for damaged parts, loose fasteners, or any other condition that may affect safe operation.

Karatteristiċi tal-Prodott

The Truper ENNE-160 Pneumatic Stapler is designed for efficiency and user comfort. Key features include:

• Djar tal-Aluminju: Durable and lightweight construction for extended use.
• Manku Ergonomiku: Designed for operator comfort and reduced fatigue.
• Sistema ta' Rilaxx Rapidu: Facilitates easy clearing of jammed staples.
• Kontroll tal-Fond Aġġustabbli: Allows precise control over staple depth.
• Metallic Contact Safety: Ensures staples are only fired when the tool is pressed against the workpiece.
• 360° Rotatable Air Exhaust Valve: Directs exhaust air away from the operator for improved comfort.
• Kompatibilità Staple: Uses staples from 3/4" to 2" in length.
• Pressjoni tax-Xogħol: Operates efficiently between 75 and 110 PSI.
• Kapaċità tal-iskartoċċ: Holds up to 100 staples.

Figure 2: Key features and components of the Truper ENNE-160 Pneumatic Stapler.

Speċifikazzjonijiet

Figure 3: Dimensions of the Truper ENNE-160 Pneumatic Stapler.

Setup

1. Qabbad il-Provvista tal-Arja:
   • Ensure the air compressor is off and depressurized.
   • Connect a 1/4" NPT quick-change connector to the air inlet of the stapler.
   • Attach the air hose from your compressor to the stapler's connector.
   • Set the air compressor pressure regulator to the recommended operating range of 75-110 PSI. Do not exceed 110 PSI.
2. Tagħbija Staples:
   • Disconnect the air supply before loading staples.
   • Locate the staple magazine release latch, typically at the rear of the magazine.
   • Pull the magazine open or slide it back.
   • Insert a strip of 16 gauge staples (3/4" to 2" length) into the magazine with the points facing down.
   • Agħlaq il-magażin sew sakemm jissakkar.
3. Adjust Depth Control:
   • The stapler features an adjustable depth control mechanism.
   • Rotate the depth adjustment knob or lever (refer to Figure 2 for location) to set the desired staple depth. Test on a scrap piece of material first.

Istruzzjonijiet Operattivi

1. Ipprepara l-Biċċa tax-Xogħol: Ensure the material is clean, dry, and free of obstructions. Secure the workpiece if necessary.
2. Connect Air: Reconnect the air supply to the stapler.
3. Għodda tal-Pożizzjoni: Place the nose of the stapler firmly against the workpiece where you want to drive a staple. The metallic contact safety mechanism requires pressure against the surface to allow firing.
4. Fire Staple: Squeeze the trigger to drive a staple. Release the trigger after each staple.
5. Continuous Operation (if applicable): Some models allow for bump firing. If your model supports this, hold the trigger and bump the nose of the tool against the workpiece to drive staples rapidly. Always exercise caution with this mode.
6. Neħħi l-Imblukkar: If a staple jam occurs, immediately disconnect the air supply. Use the quick-release system to open the magazine and carefully remove the jammed staple. Reconnect air only after the jam is cleared and the magazine is closed.
7. Adjust Air Exhaust: The 360° rotatable air exhaust valve can be adjusted to direct exhaust air away from your face or the workpiece.

Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your pneumatic stapler. Always disconnect the air supply before performing any maintenance.

• Lubrikazzjoni: Apply a few drops of pneumatic tool oil into the air inlet daily or before each use. This lubricates internal components. Do not use detergent oil or automotive oil.
• Tindif: Keep the tool clean and free of debris. Wipe down the exterior with a clean cloth. Periodically clean the magazine and nose area to prevent staple jams.
• Filtru tal-Arja: If your air compressor has an inline air filter, ensure it is regularly cleaned or replaced to prevent contaminants from entering the tool.
• Spezzjona l-Pajpijiet u l-Fittings: Regularly check air hoses and fittings for wear, leaks, or damage. Replace any damaged components immediately.
• Ħażna: Store the stapler in a dry, clean environment when not in use. Disconnect it from the air supply.

Issolvi l-problemi

Garanzija u Appoġġ

TRUPER products are manufactured to high-quality standards. For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official TRUPER websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal talbiet ta' garanzija.

Manifattur: Truper SA de CV