Introduzzjoni
This manual provides essential instructions for the installation and care of your Puig 1553N Spares License Support. Designed for motorcycles, this high-quality component ensures secure attachment of your license plate while maintaining the aesthetic harmony of your vehicle. Its robust construction is intended to withstand typical road conditions and minor impacts.
Il-karatteristiċi ewlenin jinkludu:
- High-quality construction identical to original Puig license supports.
- Designed for easy adaptation to various motorcycle models.
- Ensures secure attachment of the license plate.
- Installation does not require specialized mechanical knowledge or tools.
Prodott Overview
The Puig 1553N Spares License Support is a T-shaped bracket, typically black, made from durable material (Legierter Stahl - alloy steel) with a powder-coated finish. It features multiple slots for mounting to the motorcycle and for attaching the license plate.
Image: Puig 1553N Spares License Support. This image displays the black, T-shaped bracket, highlighting the elongated slots on the horizontal bar for motorcycle attachment and the vertical bar for license plate mounting. The material appears sturdy and the finish is matte black.
Setup u Installazzjoni
- Preparazzjoni: Ensure your motorcycle is stable and turned off. Gather any necessary tools, although specialized tools are generally not required for this installation.
- Identifika l-Punti tal-Immuntar: Locate the existing mounting points on your motorcycle where the license plate support will be attached. These are typically near the rear fender or tail section.
- Position the Support: Align the horizontal section of the Puig 1553N support with the motorcycle's mounting points. The slots allow for some adjustment to fit various bolt patterns.
- Secure the Support: Use appropriate fasteners (not included with this spare part, typically reused from the original setup or purchased separately) to securely attach the support to the motorcycle. Ensure all bolts are tightened to prevent vibration and movement.
- Attach License Plate: Once the support is firmly in place, align your license plate with the vertical slots on the support. Use suitable bolts and nuts (not included) to attach the license plate. Ensure it is centered and securely fastened.
- Kontroll Finali: Verify that the license plate support and the license plate itself are stable, properly aligned, and do not obstruct any lights or other motorcycle components.
Nota: The installation process is designed to be straightforward and does not require prior experience or specific mechanical knowledge. However, if you are unsure, consult a qualified mechanic.
Użu u Funzjoni
The Puig 1553N Spares License Support serves as a robust and reliable bracket for mounting your motorcycle's license plate. Once installed, it provides a stable platform, preventing the license plate from vibrating excessively or becoming dislodged during operation. Its design integrates seamlessly with the motorcycle's aesthetics.
Manutenzjoni
- Spezzjoni regolari: Periodically check all mounting bolts for tightness. Vibrations from motorcycle operation can sometimes loosen fasteners.
- Tindif: Clean the support with a mild soap and water solution. Avoid abrasive cleaners or solvents that could damage the powder-coated finish.
- Kontroll tal-Ħsara: Inspect the support for any signs of damage, such as cracks or bends, especially after any minor impacts or falls. Replace the support if significant damage is observed to ensure license plate security.
Issolvi l-problemi
- License Plate Vibrates:
- Ensure all bolts securing the support to the motorcycle are tight.
- Verify that the license plate itself is securely fastened to the support.
- Support Appears Loose:
- Re-tighten all mounting hardware.
- Check for any wear or damage to the mounting points on the motorcycle or the support itself.
Speċifikazzjonijiet
| Brand | Puig |
| Numru tal-Mudell | 1553N |
| Materjal | Alloy Steel (Legierter Stahl) |
| Kulur | Iswed |
| Tip Finish | Trab Miksija |
| Dimensjonijiet tal-Prodott | 4.2 x 20 x 21.6 ċm |
| Piż tal-oġġett | 20 g |
| Tip ta 'Servizz tal-Vettura | Mutur |
Garanzija u Appoġġ
For warranty information or technical support regarding your Puig 1553N Spares License Support, please refer to the official Puig webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.
Manifattur: Puig
Websit: www.puig.tv (Eżampil-link, il-link attwali jista' jvarja)
