1. Informazzjoni Importanti dwar is-Sigurtà
TWISSIJA: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- This product is designed for installation on wood stud walls (16-inch spacing), solid concrete walls, or brick walls. Tinstallax fuq drywall waħdu.
- Kun żgur li l-istruttura tal-ħajt tista' ssostni b'mod sikur il-piż ikkombinat tal-muntatura u tat-televiżjoni.
- Teċċedix il-kapaċità massima tal-piż ta' 100 lbs (45.3 kg).
- Verify the VESA pattern of your TV is within the supported range (Min VESA 200x100 mm, Max VESA 600x400 mm).
- Use all provided hardware. Do not use parts that are damaged or missing.
- Dejjem uża apparat li jsib l-istuds biex issib l-istuds tal-injam b'mod preċiż.
- Ilbes tagħmir tas-sigurtà xieraq waqt l-installazzjoni.
- Żomm it-tfal u l-annimali domestiċi 'l bogħod waqt l-installazzjoni.
- Periodically check that the mount is secure and all fasteners are tight.
2. Prodott Aktarview
The Mounting Dream MD2617-CA is a full motion TV wall mount designed for televisions between 42 and 84 inches, weighing up to 100 lbs. It offers extensive adjustability for optimal viewangoli.
Image: The Mounting Dream MD2617-CA full motion TV wall mount, shown with its articulating arms and a small level tool.
Karatteristiċi ewlenin:
- Kompatibilità Universali: Supports most 42-84 inch TVs up to 100 lbs with VESA patterns from 200x100mm to 600x400mm.
- Flessibilità sħiħa tal-moviment:
- Mejjel: +5° to -15° for glare reduction.
- Dawwar: Up to ±45° for optimal viewing minn pożizzjonijiet varji.
- Estensjoni: Extends up to 16.6 inches from the wall and retracts to 2.5 inches.
- Post-Installation Leveling: ±4° adjustment for perfect TV leveling after mounting.
- Kostruzzjoni robusta: Made from cold-formed steel for safety and reliability.
- Ġestjoni Integrata tal-Kejbils: Clips on the arms help organize cables.
- Allen Key Storage: Convenient storage for the Allen key on the mount.
- Safety Clips: Mechanisms to securely lock the TV in place.
Immaġni: Dettaljata view of the mount's features, including Allen key storage, TV locking clips, rubber mat for cushioning, and cable management clips.
3. Speċifikazzjonijiet
| Numru tal-Mudell | MD2617-CA |
| Kompatibilità tad-Daqs tat-TV | 42 - 84 pulzieri |
| Kapaċità tal-piż | 100 lbs (45.3 kg) |
| Kompatibilità VESA | Min: 200x100 mm, Max: 600x400 mm |
| Angolu Mejjel | +5° / -15° |
| Angolu li jdur | Up to ±45° (depending on TV size) |
| Estensjoni mill-Ħajt | 2.5 pulzieri (irtirat) sa 16.6 pulzieri (estiż) |
| Invellar ta' wara l-installazzjoni | ± 4° |
| Dimensjonijiet tal-Pjanċa tal-Ħajt | (Refer to specific diagram in packaging for exact dimensions, typically covers 16-inch stud spacing) |
| Materjal | Cold-formed steel |
| Kulur | Iswed |
4. Gwida għas-Setup u l-Installazzjoni
Before you begin, ensure you have all necessary tools and hardware. A stud finder, drill, level, and measuring tape are typically required. All hardware is provided in pre-labeled bags.
4.1 Compatible Wall Types:
This mount is designed for:
- Wood Stud Walls: Suitable for 8", 12", or 16" wood stud spacing. (Note: Not for studs wider than 16").
- Solid Concrete Walls
- Ħitan tal-Briks
IMPORTANT: DO NOT install this TV mounting bracket on drywall alone.
Image: Illustrations showing the mount installed on wood stud, concrete, and brick walls, with a warning against drywall-only installation.
4.2 Installazzjoni Pass Pass:
Follow these general steps. Refer to the detailed paper template and instructions included in your package for precise measurements and hardware selection.
- Attach Brackets to TV Back:
Select the appropriate screws, washers, and spacers for your TV's VESA mounting holes. Secure the two vertical TV brackets to the back of your television. Ensure they are centered and securely fastened.
Image: A three-step installation guide showing attaching brackets to the TV, installing the wall plate, and hanging the TV.
- Installa l-Pjanċa tal-Ħajt:
Determine the desired height for your TV. Use a stud finder to locate the center of your wood studs. Mark the drill holes using the provided paper template. For concrete/brick walls, mark holes directly. Drill pilot holes as specified in the manual. Secure the wall plate to the wall using the appropriate lag bolts and washers. Use the included level to ensure the wall plate is perfectly horizontal.
- Iddendel it-TV mal-Pjattaforma tal-Ħajt:
Carefully lift the TV (with brackets attached) and hook the brackets onto the wall plate. Ensure the TV is securely seated. Engage the safety locking clips to prevent accidental dislodgement. Perform any post-installation leveling adjustments as needed.
Concrete Anchors: If installing on concrete, concrete anchors (Anchor Size: φ10x50mm) can be provided upon request from Mounting Dream customer support.
5. Istruzzjonijiet Operattivi
The MD2617-CA mount offers various adjustments to achieve your preferred viewangolu tal-ing.
5.1 Adjusting Tilt:
To adjust the vertical tilt of your TV (from +5° up to -15° down), loosen the tilt adjustment knobs on the TV brackets, position the TV to the desired angle, and then securely tighten the knobs. This helps reduce glare from lights or windows.
Image: A TV mounted on the wall, demonstrating the tilt range from +5 degrees up to -15 degrees down.
5.2 Adjusting Swivel and Extension:
The articulating arms allow you to swivel the TV left or right by up to ±45° and extend it up to 16.6 inches from the wall or retract it to 2.5 inches. Gently push or pull the TV to the desired position. The arms are designed for smooth movement.
Image: A TV mounted on the wall, demonstrating the swivel range of up to ±45 degrees.
Image: A diagram illustrating the mount's extension capability, extending 16.6 inches and retracting to 2.5 inches from the wall.
5.3 Post-Installation Leveling:
If your TV appears slightly unlevel after installation, you can make a fine adjustment of ±4° without removing the TV from the wall. Consult your specific manual for the exact mechanism, which typically involves loosening specific screws on the TV brackets, adjusting, and re-tightening.
Image: A TV mounted on the wall, showing the ability to level the screen by ±4 degrees after initial installation.
6. Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u t-tħaddim sikur tal-muntatura tal-ħajt tat-TV tiegħek.
- Spezzjoni Perjodika: Every few months, visually inspect the mount and all connection points for any signs of wear, damage, or loosening.
- Issikka l-Qfieli: Gently re-tighten any screws or bolts that may have loosened over time. Do not overtighten.
- Tindif: Imsaħ il-muntatura b'ċarruta ratba u niexfa biex tneħħi t-trab. Evita li tuża prodotti tat-tindif jew solventi li joborxu.
- Lubrikazzjoni: The articulating arms are designed for smooth movement. If any stiffness occurs, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with the TV or wall.
7 Issolvi l-problemi
If you encounter issues with your Mounting Dream TV wall mount, refer to the following common solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-TV mhux livellat wara l-installazzjoni. | Initial installation slightly off; post-installation leveling not adjusted. | Use the ±4° post-installation leveling feature. Loosen the specific leveling screws, adjust the TV, and re-tighten. |
| Il-muntatura tħossha maħlula jew imċaqalqa. | Wall plate not securely fastened; fasteners have loosened over time. | Immediately remove the TV. Check all lag bolts securing the wall plate to the wall. Ensure they are fully tightened into studs or concrete. If necessary, consult a professional. |
| It-TV ma joqgħodx mal-muntatura. | Mudell VESA jew daqs/piż tat-TV mhux korrett. | Verify your TV's VESA pattern, size, and weight against the mount's specifications (Min VESA 200x100mm, Max VESA 600x400mm, 42-84 inches, up to 100 lbs). |
| Difficulty moving articulating arms. | Dust or lack of lubrication at pivot points. | Clean pivot points and apply a small amount of silicone-based lubricant if needed. Ensure no cables are obstructing movement. |
8. Garanzija u Appoġġ
Mounting Dream products are designed for durability and reliability. This product comes with a warranty (refer to your purchase documentation for specific terms and duration).
For any pre-purchase questions, installation assistance, or support, the Mounting Dream customer service team is available 7 days a week.
- Servizz tal-Klijent: Contact information can be found on the official Mounting Dream webis-sit jew l-imballaġġ tal-prodott tiegħek.
- Riżorsi onlajn: Żur il- Aħżen tal-Ħolm tal-Immuntar fuq Amazon għal informazzjoni u appoġġ addizzjonali dwar il-prodott.
