Kuryakyn Omni LED Run/Turn/Brake Side Saddlebag Inserts Instruction Manual

1. Introduzzjoni u Fuqview

This manual provides detailed instructions for the installation, operation, and maintenance of your Kuryakyn Omni LED Run/Turn/Brake Side Saddlebag Inserts. These inserts are designed to replace the factory saddlebag reflectors on Honda Gold Wing motorcycles from model years 2018 to 2020, enhancing visibility and safety with integrated run, brake, and turn signal lighting functions.

The Omni LED inserts feature durable injection-molded ABS housings with red polycarbonate lenses, providing both an aesthetic upgrade and functional lighting.

2. Informazzjoni dwar is-Sigurtà

Please read and understand all instructions before beginning installation. Improper installation may result in product damage, electrical issues, or injury. Always wear appropriate safety gear, including eye protection, during installation.

• Ensure the motorcycle's ignition is off and the battery is disconnected before performing any electrical work.
• Consult a qualified motorcycle technician if you are unsure about any part of the installation process.
• Do not modify the product in any way not specified in this manual.
• Verify all connections are secure and properly insulated to prevent short circuits.

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha elenkati hawn taħt huma preżenti fil-pakkett tiegħek:

• (2) Omni LED Saddlebag Lights: Chrome housing with red polycarbonate lenses.
• (12) 6" Cable Ties: For securing wiring.
• (8) Cord Keepers: For managing and routing wires.
• (2) M5 x .8 Flange Lock Nuts: Għall-immuntar.
• (2) Alcohol Pads: For surface preparation.

Tools Suggested for Installation (Not Included):

• Metric hex wrench set
• Tornavit tar-ras Phillips
• Drill u drill bits
• Punch taċ-ċentru
• Warm soapy water and a clean rag
• Loctite blu

4. Setup u Installazzjoni

The following steps outline the general installation process. Specific wiring details may vary based on your motorcycle's configuration. Refer to your motorcycle's service manual for detailed wiring diagrams if necessary.

1. Preparazzjoni: Ensure the motorcycle is off and the battery is disconnected. Clean the area around the factory saddlebag reflectors with warm soapy water and then with the provided alcohol pads.
2. Remove Factory Reflectors: Carefully remove the existing reflectors from the saddlebags. This may involve prying them gently or removing fasteners from the inside of the saddlebag.
3. Position Omni LED Inserts: Test fit the Omni LED inserts into the reflector openings. Ensure they sit flush and align correctly.
4. Aċċess għall-Wiring: Determine the best route for the wiring from the inserts to the motorcycle's existing wiring harness for run, brake, and turn signals. This may require drilling a small hole in the saddlebag for wire pass-through, if not already present. Use a center punch before drilling to prevent slippage.
5. Konnessjonijiet elettriċi: Connect the wires from the Omni LED inserts to the appropriate run, brake, and turn signal wires on your motorcycle. It is recommended to use proper electrical connectors (not included) for secure and weather-resistant connections. Refer to your motorcycle's wiring diagram for correct wire identification.
6. Secure Inserts: Once wiring is complete and tested, secure the Omni LED inserts in place using the provided M5 x .8 flange lock nuts. Apply blue Loctite to the threads for added security.
7. Ġestjoni tal-Wajer: Use the provided cable ties and cord keepers to neatly route and secure all wiring, preventing chafing or interference with moving parts.
8. Test Finali: Reconnect the battery. Turn on the motorcycle's ignition and test all lighting functions: running lights, brake lights, and turn signals. Ensure all LEDs illuminate correctly and respond as expected.

Image 1: The Kuryakyn Omni LED Run/Turn/Brake Side Saddlebag Inserts, shown as a pair.

Image 2: Omni LED insert installed on a Honda Gold Wing saddlebag, with the lights in the off state.

Image 3: Omni LED insert illuminated as a running light, providing constant rear visibility.

Image 4: Omni LED insert activated as an amber turn signal, indicating a directional change.

Immaġni 5: Proġett tal-ġenbfile view of the Omni LED insert seamlessly integrated into the motorcycle's saddlebag.

5. Istruzzjonijiet Operattivi

The Kuryakyn Omni LED Run/Turn/Brake Side Saddlebag Inserts operate automatically in conjunction with your motorcycle's existing lighting system. There are no user-adjustable controls for these inserts.

• Dwal tat-Tmexxija: When the motorcycle's ignition is on and headlights are activated, the inserts will illuminate with a constant red light, enhancing rear visibility.
• Dwal tal-Brejkijiet: When the brake lever or pedal is applied, the inserts will illuminate brighter red, signaling braking action.
• Sinjali tad-dawran: When the turn signal is activated, the corresponding insert will flash amber, indicating a directional change.

6. Manutenzjoni

These LED inserts require minimal maintenance to ensure optimal performance and longevity.

• Tindif: Clean the lenses periodically with a soft cloth and mild, non-abrasive soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the polycarbonate lens.
• Spezzjoni: Regularly inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure all mounting hardware remains secure.
• Lonġevità tal-LED: LED lights are designed for long operational life and typically do not require replacement under normal use.

7 Issolvi l-problemi

If you experience issues with your Omni LED inserts, refer to the following troubleshooting guide:

• Dwal Mhux Jaħdmu:
  • Check all electrical connections for looseness or corrosion.
  • Verify that the motorcycle's battery is fully charged and properly connected.
  • Inspect the wiring for any cuts, pinches, or damage.
  • Ensure the correct wires are connected to the motorcycle's run, brake, and turn signal circuits.
• Funzjoni Intermittenti:
  • This often indicates a loose or corroded connection. Re-check all wiring points.
  • Żgura ertjar xieraq.
• Incorrect Light Color/Function:
  • Double-check that the wires are connected to the correct corresponding functions (e.g., brake wire to brake signal, turn signal wire to turn signal).

If problems persist after performing these checks, contact Kuryakyn customer support or a certified motorcycle technician.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

Kuryakyn products are manufactured to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the warranty information provided with your purchase or visit the official Kuryakyn websit.

For technical assistance, replacement parts, or further inquiries, please contact Kuryakyn customer support through their official channels. When contacting support, please have your product model number (3254) and purchase information readily available.