Manwal tal-Utent tal-Muntatura tat-TV b'Mozzjoni Sħiħa ONN ONA18TM003

1. Introduzzjoni

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your ONN ONA18TM003 Full Motion TV Mount. This mount is designed to securely hold televisions ranging from 32 to 47 inches, offering full motion capability for optimal viewing angles and integrated cable management for a tidy setup. Please read all instructions carefully before beginning installation.

2. Informazzjoni Importanti dwar is-Sigurtà

WARNING: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions, or have doubts about the safety of the installation, please contact a qualified installer.

• Do not install this product on walls that are not structurally sound. Ensure the mounting surface can support the combined weight of the mount and the television.
• This mount is intended for use with televisions weighing up to the specified maximum load capacity. Exceeding this weight limit may result in instability and possible injury.
• Always use the provided mounting hardware. If you are unsure about the type of hardware required for your wall, consult a professional.
• Żomm it-tfal u l-annimali domestiċi 'l bogħod waqt l-installazzjoni.
• Check all connections periodically to ensure they remain secure.

3. Kontenut tal-Pakkett

Verify that all components are present and undamaged before installation. If any parts are missing or defective, do not proceed with installation and contact customer support.

• Assemblea tal-Pjanċa tal-Ħajt
• Assemblaġġ tal-Bracket tat-TV
• Kit tal-Ħardwer tal-Immuntar (viti, ankri, woxers, spacers)
• Built-in Leveler
• Manwal ta' Istruzzjoni

Immaġni 1: Fuqview of the ONN ONA18TM003 Full Motion TV Mount, showing the wall plate, articulating arm, and TV bracket.

4. Setup u Installazzjoni

Professional installation is recommended. If you choose to install it yourself, ensure you have the necessary tools and follow these steps carefully.

4.1 Għodda Meħtieġa (Mhux Inkluża)

• Finder Stud
• Drill bi drill bits xierqa
• Ċavetta tas-Sokit jew Ċavetta Aġġustabbli
• Tornavit tar-ras Phillips
• Lapes
• Tejp tal-Kejl

4.2 Attaching the Wall Plate to the Wall

1. Iddetermina Post tal-Immuntar: Use a stud finder to locate the center of a wooden stud. Mark the desired height for the top of your TV. Ensure the location allows for full motion of the TV without obstruction.
2. Pożizzjoni tal-Pjanċa tal-Ħajt: Hold the wall plate assembly against the wall at the marked location. Use the built-in leveler to ensure it is perfectly horizontal. Mark the drill holes with a pencil.
3. Drill Pilota Toqob: Drill pilot holes into the marked locations. For wood studs, use a 5/32 inch (4 mm) drill bit. For concrete or brick walls, use a 3/8 inch (10 mm) masonry drill bit and insert wall anchors (if provided and suitable for your wall type).
4. Pjanċa tal-Ħajt Sikura: Attach the wall plate to the wall using the lag bolts and washers provided. Tighten securely, but do not overtighten.

4.3 Attaching TV Brackets to the Television

1. Agħżel il-viti tat-TV: Choose the correct diameter and length of screws that fit your TV's mounting holes. Refer to your TV's manual for VESA pattern and screw size. Use spacers if the TV back is uneven or if screws are too long.
2. Waħħal il-parentesi: Carefully place your TV face down on a soft, clean surface. Align the TV bracket assembly with the mounting holes on the back of your TV. Secure the brackets using the selected screws and washers. Ensure the brackets are centered and level.

4.4 Hanging the Television on the Wall Mount

1. Lift and Hook: With assistance, carefully lift the television with the attached brackets. Hook the TV brackets onto the wall plate assembly.
2. TV Sikura: Locate the safety screws or locking mechanisms on the TV brackets. Tighten these to secure the TV to the wall mount, preventing accidental dislodgement.

5. Istruzzjonijiet Operattivi

The ONN ONA18TM003 mount offers flexible viewing options once installed.

5.1 Aġġustament ViewIng Angolu

• Estensjoni: Gently pull the TV away from the wall to extend the articulating arm.
• Dawwar: Pivot the TV left or right to achieve your desired viewangolu tal-ing.
• Mejjel: The mount may allow for vertical tilt adjustment. Loosen the tilt knobs (if present), adjust the TV to the desired angle, and re-tighten the knobs.
• Invellar: The built-in leveler helps ensure your TV is perfectly horizontal. Minor adjustments can be made if needed after installation.

5.2 Ġestjoni tal-Cable

Utilize the integrated cable management guides on the mount's arm to route and secure your TV cables. This helps maintain a clean appearance and prevents cables from interfering with the mount's movement.

6. Manutenzjoni

• Tindif: Imsaħ il-muntatura b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• Kontrolli perjodiċi: Periodically check all screws and connections to ensure they are tight and secure. Re-tighten if necessary.
• Lubrikazzjoni: The articulating joints are designed for smooth operation. Avoid applying lubricants unless specifically instructed by the manufacturer.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official ONN websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Informazzjoni ta' Kuntatt: Please refer to your product packaging or the ONN official websit għad-dettalji ta' kuntatt tal-appoġġ għall-klijenti l-aktar aġġornati.