Reality Leuchten R62793132 Venida LED Ceiling Light User Manual

1. Introduzzjoni

Grazzi tax-xiriasing the Reality Leuchten R62793132 Venida LED Ceiling Light. This modern and original ceiling fixture is designed to complement various interior styles and enhance your living space. It features integrated LED technology for high light quality and energy efficiency, along with a SWITCH dimmer function for adjustable brightness. Please read this manual carefully before installation and operation to ensure safe and correct use of the product. Keep this manual for future reference.

Figura 1.1: The Reality Leuchten R62793132 Venida LED Ceiling Light, showcasing its modern square design in matte black.

2. Istruzzjonijiet tas-Sigurtà

Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin biex tevita korrimenti jew ħsara:

• Sigurtà Elettrika: Installation must be performed by a qualified electrician or a person with appropriate electrical knowledge to ensure compliance with local wiring regulations.
• Skonnettjar tal-Enerġija: Before any installation, maintenance, or cleaning, always disconnect the power supply at the main circuit breaker or fuse box.
• Voltage: Tiżgura l-provvista voltage jaqbel mal-voltage speċifikat fuq it-tikketta tal-prodott (240 Volts).
• Wiċċ tal-Immuntar: The mounting surface must be capable of supporting the weight of the fixture.
• LED integrat: The LED light source in this fixture is not replaceable. Do not attempt to open or modify the LED module.
• Klassifikazzjoni IP20: This product has an IP20 rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. It is suitable for indoor use only in dry environments.
• Tindif: Use a dry, soft cloth for cleaning. Do not use abrasive cleaners or solvents.

3. Kontenut tal-Pakkett

Iftaħ il-kaxxa bir-reqqa u kun żgur li l-komponenti kollha huma preżenti u mhux imħassra. Jekk xi partijiet huma neqsin jew imħassra, ikkuntattja lill-bejjiegħ tiegħek immedjatament.

• 1x Reality Leuchten R62793132 Venida LED Ceiling Light fixture
• 1x Mounting hardware kit (screws, wall plugs)
• 1x Manwal ta 'Istruzzjoni

4. Setup u Installazzjoni

Follow these steps for safe and proper installation of your ceiling light.

1. Ipprepara għall-Installazzjoni:
   • Itfi l-provvista ewlenija tal-enerġija għaż-żona tal-installazzjoni fis-circuit breaker.
   • Ensure the power is off by using a voltagtester.
2. Immarka l-Punti tal-Immuntar:
   • Position the mounting bracket (usually attached to the fixture base) against the ceiling at the desired installation location.
   • Mark the drilling points for the screws.
3. Drill Holes and Install Wall Plugs:
   • Drill holes at the marked points using an appropriate drill bit for your ceiling material.
   • Daħħal il-plaggs tal-ħajt ipprovduti fit-toqob imtaqqbin.
4. Bracket tal-Immuntar Sikur:
   • Attach the mounting bracket to the ceiling using the screws provided. Ensure it is securely fastened.
5. Konnessjoni Elettrika:
   • Connect the household electrical wires to the terminals on the fixture. Typically, this involves connecting Live (L), Neutral (N), and Earth (E) wires. Refer to the wiring diagram in the included manual for specific connections.
   • Kun żgur li l-konnessjonijiet kollha huma stretti u sikuri.
6. Waħħal l-Apparat:
   • Carefully attach the main light fixture body to the secured mounting bracket. Follow the specific mechanism (e.g., twisting, screwing, or clipping) as indicated in the detailed manual.
7. Irrestawra l-Enerġija:
   • Once the fixture is securely installed and wired, restore power at the main circuit breaker.
   • Ittestja d-dawl biex tiżgura li jaħdem sew.

Figura 4.1: Technical drawing showing the dimensions of the R62793132 Venida LED Ceiling Light. Dimensions are approximately 57.5 cm (length) x 35.5 cm (width) x 7.5 cm (height).

Figura 4.2: The Venida LED Ceiling Light installed, demonstrating its appearance when mounted.

5. Istruzzjonijiet Operattivi

The Reality Leuchten R62793132 Venida LED Ceiling Light features an integrated SWITCH dimmer function, allowing you to adjust the brightness using a standard wall light switch. No external dimmer is required.

• Tixgħel/Jitfi: Use your standard wall light switch to turn the light on or off.
• Adjusting Brightness (SWITCH Dimmer):
  • 100% Luminożità: Turn the light switch ON. The light will illuminate at full brightness.
  • 50% Luminożità: Turn the light switch OFF, then immediately ON again (within 1-2 seconds). The light will switch to 50% brightness.
  • 25% Luminożità: Turn the light switch OFF, then immediately ON again (within 1-2 seconds) while the light is at 50% brightness. The light will switch to 25% brightness.
  • To cycle back to 100% brightness, turn the light switch OFF and then ON again.

Figura 5.1: Diagram explaining the SWITCH dimmer functionality. One click for 100% brightness, two clicks for 50%, and three clicks for 25% brightness using a standard wall switch. For more information, visit trio-lighting.com/switchdimmer.

6. Manutenzjoni

The Reality Leuchten R62793132 Venida LED Ceiling Light requires minimal maintenance.

• Tindif: Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf. Imsaħ l-apparat b'ċarruta ratba, niexfa, jew kemxejn imxarrba.amp drapp. Tużax kimiċi ħarxa, prodotti tat-tindif li joborxu, jew solventi, għax dawn jistgħu jagħmlu ħsara lill-finitura jew lill-komponenti elettriċi.
• Sors tad-Dawl LED: The LED light source is integrated and designed for a long lifespan (approximately 25,000 hours). It is not user-replaceable. If the LED fails, the entire fixture may need to be replaced.

7 Issolvi l-problemi

Jekk tiltaqa' ma' problemi bid-dawl tas-saqaf tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:

• Id-dawl ma jixgħelx:
  • Iċċekkja jekk il-provvista ewlenija tal-enerġija għall-apparat hijiex mixgħula.
  • Verify that the wall switch is in the ON position.
  • Inspect electrical connections for looseness or damage (ensure power is off before inspection).
  • Jekk il-problema tippersisti, ikkonsulta elettriċista kwalifikat.
• Id-Dawl Jiteptep jew Jitbaxxa bla mistenni:
  • Ensure the SWITCH dimmer function is not being accidentally triggered by rapid on/off cycles.
  • Check for stable power supply to your home.
  • If flickering continues, consult a qualified electrician.
• Light is Not Bright Enough:
  • Use the SWITCH dimmer function to cycle through brightness levels (100%, 50%, 25%) to ensure it is set to your desired level.

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. Reality Leuchten products are designed for durability and performance.

Spare parts availability information is not explicitly provided. For technical support, product inquiries, or assistance with installation, please contact your point of purchase or the manufacturer directly. Keep your purchase receipt as proof of purchase.