1. Introduzzjoni
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Hoshizaki IM-500SAB Square Cuber Ice Maker. Please read this manual thoroughly before operating the unit and keep it for future reference. The IM-500SAB is an air-cooled ice maker designed to produce approximately 489 lbs of individual square ice cubes per 24 hours, ideal for chilling beverages with minimal dilution. It features the EverCheck™ digital control system with an LED display to monitor performance and alert operators to potential issues.
Figura 1: Quddiem view of the Hoshizaki IM-500SAB ice maker, showcasing its stainless steel exterior and the control panel with air filter vent on the right side. The control panel includes an LED display and indicators for operation and maintenance.
2. Informazzjoni dwar is-Sigurtà
Always observe basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury. This unit must be installed by a qualified technician in accordance with all local and national electrical and plumbing codes.
- Konnessjoni Elettrika: The IM-500SAB requires a single-phase, 115V/60/1 electrical connection and must be hardwired at the installation site. A cord/plug is not included. Ensure proper grounding.
- Refriġerant: This unit contains R-404A refrigerant. Servicing should only be performed by certified personnel. Do not tamper with the refrigerant system.
- Ventilazzjoni: Ensure adequate air circulation around the unit. Do not block the air intake or exhaust vents. The ambient temperature range for operation is 45°F to 100°F.
- Provvista tal-Ilma: Connect to a potable water supply with a pressure between 10 to 113 psig and a temperature between 45°F to 90°F.
- Tindif: Disconnect power before cleaning or performing any maintenance. Use only recommended cleaning agents.
3. Setup u Installazzjoni
Proper installation is crucial for the performance and longevity of your ice maker. It is recommended that installation be performed by a professional.
3.1 Disimballaġġ
Carefully remove the unit from its packaging. Inspect for any shipping damage. Report any damage to your carrier immediately.
3.2 Rekwiżiti tal-Post
- Place the unit on a level, sturdy surface capable of supporting its weight when full of ice.
- Ensure the ambient temperature is within the specified range of 45°F to 100°F.
- Allow sufficient clearance around the unit for proper ventilation and service access. The dimensions are approximately 44" W x 27-5/8" D x 21-3/4" H.
- If stacking units, ensure proper stacking kits are used and follow the stacking instructions provided with the kit. Up to three IM-500SAB units can be stacked for increased ice production.
3.3 Konnessjoni Elettrika
A dedicated electrical circuit is recommended. The unit requires a 115V/60Hz/1-phase power supply, hardwired at the site. The unit draws 11.5 amps and requires a 20 Amp Max fuse. Consult a licensed electrician for proper wiring.
3.4 Konnessjoni tal-Ilma
Connect the unit to a cold, potable water supply. An inline water filter is highly recommended to ensure ice quality and reduce mineral buildup. Ensure water pressure is between 10 and 113 psig and water temperature is between 45°F and 90°F.
3.5 Compatible Bins & Dispensers
The IM-500SAB is designed to be paired with compatible ice storage bins or dispensers, which are sold separately. Compatible models include: B-700, B-800, B-900, B-1150, B-1300, B-1500, B-1650.
4. Istruzzjonijiet Operattivi
Once properly installed and connected, your Hoshizaki IM-500SAB is ready for operation.
4.1 L-Istartjar Inizjali
- Ensure all connections (electrical, water, drain) are secure and leak-free.
- Turn on the water supply valve to the ice maker.
- Apply power to the unit. The EverCheck™ digital control system will initiate a startup sequence.
- The unit will begin producing ice automatically. The first batch of ice may take longer and should be discarded.
4.2 EverCheck™ Digital Control System
The EverCheck™ system continuously monitors the ice maker's performance. The LED display will show operational status and alert the operator to any detected problems, such as low water pressure or issues requiring maintenance. Refer to the display for diagnostic codes and follow the recommended actions.
4.3 Produzzjoni tas-Silġ
The IM-500SAB produces individual square cubes. Production capacity is up to 489 lbs per 24 hours under optimal conditions (70°F air / 50°F water). AHRI certified production is 414 lbs at 90°F air / 70°F water.
5. Manutenzjoni
Regular maintenance ensures optimal performance, ice quality, and extends the lifespan of your Hoshizaki ice maker. Always disconnect power before performing any maintenance.
5.1 Tindif tal-Filtru tal-Arja
The air filter should be cleaned darbtejn fix-xahar. Locate the air filter behind the front panel. Remove it, wash with mild soap and water, rinse thoroughly, and allow it to dry completely before reinserting. A clean air filter is essential for efficient operation and preventing compressor overheating.
5.2 Cleaning the Ice Machine
The ice making components should be cleaned and sanitized regularly by a qualified service technician. This prevents scale buildup and ensures clean, safe ice production. The unit's panels are easily removed, and all components are accessible for service.
5.3 Tindif Esterni
Wipe the durable stainless steel exterior with a soft cloth and mild detergent. Avoid abrasive cleaners or scouring pads that could scratch the surface.
6 Issolvi l-problemi
The EverCheck™ digital control system provides diagnostic information. Consult the LED display for specific error codes. Below are common issues and general troubleshooting steps.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda produzzjoni tas-silġ | No power, water supply off, clogged water filter, high ambient temperature. | Check power supply, ensure water valve is open, replace water filter, ensure proper ventilation and ambient temperature. |
| Produzzjoni baxxa tas-silġ | Dirty air filter, high ambient/water temperature, scale buildup, low water pressure. | Clean air filter, ensure proper operating conditions, descale unit (professional service recommended), check water pressure. |
| Ħoss mhux tas-soltu | Loose components, fan obstruction, compressor issue. | Inspect for loose parts, clear obstructions, contact qualified service technician. |
| EverCheck™ LED error code | System detected an issue. | Refer to the specific error code in the full service manual or contact Hoshizaki customer support. |
For issues not listed or if troubleshooting steps do not resolve the problem, contact a qualified Hoshizaki service technician.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | IM-500SAB |
| Brand | Hoshizaki |
| Tip | Square Cuber Ice Maker, Air-Cooled |
| Dimensjonijiet (W x D x H) | 44" x 27-5/8" x 21-3/4" (111.76 cm x 70.17 cm x 55.24 cm) |
| Approx. Production Capacity (24 hrs) | Up to 489 lbs (221.8 kg) at 70°F air / 50°F water |
| AHRI Certified Production (24 hrs) | 414 lbs (187.8 kg) at 90°F air / 70°F water |
| Ħtiġiet Elettriku | 115V/60Hz/1-Phase, 11.5 Amps (20 Amp Max fuse), Hardwired |
| Wattage | 440 watt |
| Refriġerant | R-404A (1 lbs. 10.5 oz. / 751.3 g) |
| Ċaħda tas-Sħana | 4500 BTU/hr |
| Firxa tat-Temperatura Ambjentali | 45°F - 100°F (7°C - 38°C) |
| Firxa tat-Temperatura tal-Ilma | 45°F - 90°F (7°C - 32°C) |
| Pressjoni tal-Ilma | 10 - 113 psig |
| Materjal ta 'barra | Azzar Inossidabbli Durabbli |
| Sistema ta' Kontroll | EverCheck™ Digital Control with LED Display |
| Pajjiż ta' Oriġini | Ġappun |
| X'hemm fil-Kaxxa | Ice Maker (Bins & Dispensers sold separately) |
8. Garanzija u Appoġġ
8.1 Informazzjoni dwar Garanzija
Hoshizaki provides the following warranty for the IM-500SAB Ice Maker:
- Three Years: Parts & Labor warranty on the entire machine (for serial numbers VxxxxxJ and after).
- Ħames Snin: Parts warranty on the Compressor and air-cooled condenser coil.
Please retain your proof of purchase for warranty claims. Warranty terms may vary based on region and specific purchase agreements. Consult your dealer or Hoshizaki for full warranty details.
8.2 Appoġġ għall-Klijent
For technical assistance, service requests, or questions regarding your Hoshizaki IM-500SAB ice maker, please contact your authorized Hoshizaki dealer or visit the official Hoshizaki website for contact information and service locator tools.
