Ras tal-martell 6-Amp Manwal tal-Utent tat-Tħin tal-Angolu ta' 4-1/2 Pulzieri

Introduzzjoni

This manual provides important information for the safe operation, maintenance, and troubleshooting of your Hammerhead 6-Amp 4-1/2 Inch Angle Grinder (Model HAAG060). Please read this manual thoroughly before using the tool to ensure proper and safe operation.

Istruzzjonijiet Importanti dwar is-Sigurtà

TWISSIJA: Aqra t-twissijiet kollha tas-sigurtà u l-istruzzjonijiet kollha. Nuqqas ta 'segwitu tat-twissijiet u l-istruzzjonijiet jista' jirriżulta f'xokk elettriku, nar u / jew korriment serju.

Twissijiet Ġenerali dwar is-Sigurtà tal-Għodda tal-Enerġija

• Sigurtà taż-Żona tax-Xogħol: Keep work area clean and well lit. Do not operate power tools in explosive atmospheres.
• Sigurtà Elettrika: Power tool plugs must match the outlet. Do not abuse the cord.
• Sigurtà Personali: Stay alert, wear eye protection, hearing protection, and a dust mask. Dress properly.
• Użu u Kura tal-Għodda tal-Enerġija: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source before making any adjustments.
• Servizz: Ħalli l-għodda tal-enerġija tiegħek isservisjata minn persuna ta' tiswija kwalifikata li tuża biss partijiet ta' sostituzzjoni identiċi.

Specific Safety Warnings for Grinding Operations

• Always use the correct type of grinding wheel for the material being worked on.
• Ensure the grinding wheel is properly mounted and tightened before operation.
• Never operate the grinder without the guard properly installed.
• Avoid starting the grinder with the wheel in contact with the workpiece.
• Be aware of kickback and take precautions to avoid it.

Prodott Overview

The Hammerhead 6-Amp 4-1/2 Inch Angle Grinder is a versatile tool designed for various grinding and cutting applications. It features a powerful 6-Amp motor and a compact design for ease of use.

This image shows the complete Hammerhead angle grinder unit, including the main body, side handle, and a mounted grinding wheel. Two additional grinding wheels are also visible, indicating they are part of the package.

This diagram highlights important features of the angle grinder: the convenient onboard wrench storage, the power indicator light, the paddle switch for operation, and the guard adjustment mechanism for tool-free changes.

This image illustrates the three possible positions for attaching the auxiliary side handle, allowing for greater leverage, control, and a firmer grip during various operations.

Karatteristiċi ewlenin:

• Tool-free Guard Adjustment: Easily adjust the safety guard position without additional tools.
• Onboard Wrench Storage: The wrench is conveniently stored in the side handle, preventing loss.
• Powerful 6-Amp Mutur: Capable of handling a wide range of grinding and cutting tasks.
• Paddle Switch: Equipped with a safety lock to prevent accidental activation.
• 3 Position Side Handle: Provides enhanced leverage, control, and grip.

Setup u Assemblea

Twaħħil tal-Manku tal-Ġenb:

1. Identify the three threaded holes on the gear housing of the grinder.
2. Screw the side handle firmly into the desired position (left, right, or top) for optimal control and comfort.

Installing/Adjusting the Guard:

1. Kun żgur li l-grinder huwa skonnettjat.
2. Align the guard with the grinder's collar.
3. Press the guard adjustment lever (refer to Figure 2) and rotate the guard to the desired position to deflect sparks away from you.
4. Release the lever to lock the guard in place. Ensure it is securely fastened before operation.

Immuntar tar-Rota tat-Tħin:

1. Kun żgur li l-grinder huwa skonnettjat.
2. Agħfas u żomm il-buttuna tal-qfil tal-magħżel.
3. Poġġi l-flanġ ta' ġewwa fuq l-ispindle.
4. Position the grinding wheel onto the spindle, ensuring it sits flush against the inner flange.
5. Thread the outer flange onto the spindle and tighten it securely using the provided wrench (stored in the side handle).
6. Itlaq il-lock tal-magħżel.

Istruzzjonijiet Operattivi

Qabel l-Operazzjoni:

• Dejjem ilbes tagħmir protettiv personali (PPE) xieraq, inklużi nuċċalijiet tas-sigurtà, protezzjoni tas-smigħ, u ingwanti.
• Kun żgur li l-biċċa tax-xogħol tkun clamped jew miżmum.
• Check that the grinding wheel is correctly installed and not damaged.
• Verify the guard is properly positioned.

Starting and Stopping the Grinder:

1. Plug the grinder into a suitable power outlet (240 volts).
2. To start, depress the paddle switch (refer to Figure 2). The power indicator light will illuminate.
3. To stop, release the paddle switch.

Grinding Techniques:

This image shows the angle grinder in use, with sparks indicating metal grinding. The user is holding the tool firmly, demonstrating proper technique for surface grinding.

This image depicts the angle grinder being used for cutting metal, with sparks visible. The user is maintaining a secure grip and controlled movement for precise cutting.

• Ħalli l-grinder jilħaq il-veloċità sħiħa qabel ma jmiss mal-biċċa tax-xogħol.
• Applika pressjoni ħafifa u uniformi. Tisforzax l-għodda.
• Żomm qabda soda kemm fuq il-manku prinċipali kif ukoll fuq il-manku tal-ġenb.
• For grinding, hold the wheel at a slight angle (15-30 degrees) to the surface.
• For cutting (with appropriate cutting disc, not included), hold the wheel perpendicular to the surface and make shallow passes.
• Move the tool smoothly and consistently across the material.

Manutenzjoni

• Tindif: Regularly clean the ventilation openings of the tool to prevent dust buildup, which can cause overheating. Use compressed air if available.
• Spezzjoni: Periodically inspect the power cord for damage. Check the grinding wheel for cracks or wear before each use.
• Sostituzzjoni tal-pinzell: Carbon brushes may need replacement over time. This should be done by a qualified service technician.
• Ħażna: Store the grinder in a dry, secure place out of reach of children.

Issolvi l-problemi

Speċifikazzjonijiet

• Mudell: HAAG060
• Qawwa: 6-Amp
• Veloċità mingħajr Tagħbija: 12,000 RPM
• Daqs tar-rota: 4-1/2 Pulzier
• Voltage: 240 Volts
• Materjal: Metall
• Dimensjonijiet tal-Prodott: 11.42"T x 4.33"W x 3.07"Għ
• Piż tal-oġġett: 6.16 liri
• Komponenti Inklużi: Angle Grinder, 3pcs Grinding Disc, 1pc Grinding Guard, 1pc Side Handle, 1pc Wrench

Garanzija u Appoġġ

This Hammerhead Angle Grinder (Model HAAG060) comes with a Garanzija Limitata ta' Sena.

For detailed warranty information, technical support, or service inquiries, please refer to the official Hammerhead websit jew ikkuntattja lis-servizz tal-konsumatur tagħhom.

You can also download the official User Manual in PDF format for more comprehensive details: Niżżel il-Manwal tal-Utent (PDF)