1. Introduzzjoni
The Emaux MFV Top Mount Sand Filter is engineered with innovative design and advanced technology to deliver superior filtration performance and crystal clear water for your pool or hot tub. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your filter.
Image 1.1: The Emaux MFV Top Mount Sand Filter, featuring its robust, one-piece polyethylene tank and top-mounted multiport valve with pressure gauge.
Il-karatteristiċi ewlenin jinkludu:
- Designed for domestic in-ground and above-ground pools/hot spa tubs.
- Maximum operating pressure of 40 PSI / 2.8 BAR.
- Maximum temperature tolerance of 50°C (122°F).
- Universal standard union connection provided for ease of installation.
- Equipped with ABS lateral for efficient water distribution.
- Features a unique one-piece clamp with screw-type lock for simplified installation and tool-free servicing.
- Includes a multiport valve with 6 functions for versatile operation.
- Easy-to-read pressure gauge for convenient inspection of filter performance.
2. Informazzjoni dwar is-Sigurtà
Always read and follow all instructions carefully before installing or operating this product. Failure to do so could result in serious injury or property damage.
- Ensure the power supply to the pump is disconnected before performing any service or maintenance.
- Do not operate the filter above the maximum rated operating pressure of 40 PSI (2.8 BAR).
- Always relieve pressure from the filter before opening the multiport valve or performing any service.
- Keep children away from the filter system during operation and maintenance.
- Use only genuine Emaux replacement parts.
3. Setup u Installazzjoni
Proper installation is crucial for the filter's performance and longevity. It is recommended that installation be performed by a qualified professional.
3.1 Għażla tas-Sit
Choose a well-drained area, preferably shaded, that is easily accessible for maintenance. The filter should be placed on a firm, level base, such as a concrete slab, to prevent settling or shifting.
3.2 Filter Media Installation
- Ensure the internal laterals are properly seated at the bottom of the filter tank.
- Partially fill the tank with water to cover the laterals. This helps cushion the laterals when adding sand.
- Carefully add the recommended filter media (sand, suggested size: 0.5-0.8mm) into the tank. Refer to the filter's specifications for the correct amount.
- Level the sand surface.
3.3 Multiport Valve Installation
- Clean the top opening of the filter tank and the O-ring on the multiport valve.
- Carefully insert the multiport valve into the tank opening, ensuring the standpipe from the laterals aligns with the valve's opening.
- Secure the multiport valve to the tank using the unique one-piece clamp with screw-type lock. Tighten securely but do not overtighten.
3.4 Konnessjonijiet tal-plaming
Connect the pool plumbing to the multiport valve ports:
- POMPA: Connect the pipe from the pool pump discharge to this port.
- RITORN: Connect the pipe leading back to the pool inlets to this port.
- SKART: Connect a waste line to this port, leading to a suitable drain or disposal area.
Ensure all connections are watertight using appropriate sealants and fittings. The universal standard union connection is provided for convenience.
4. Istruzzjonijiet Operattivi
The multiport valve allows for various operational modes. Always turn off the pump before changing the valve position to prevent damage.
4.1 Multiport Valve Functions
| Pożizzjoni | Deskrizzjoni |
|---|---|
| FILTRI | Modalità ta' filtrazzjoni normali. L-ilma jiċċirkola minn ġos-sodda tar-ramel, jaqbad il-fdalijiet, u jerġa' lura fil-pixxina. |
| BACKWASH | Reverses water flow through the filter to flush trapped debris out to the waste line. Used for cleaning the filter media. |
| LAĦLA | Użat wara l-ħasil b'lura biex joqgħod is-sodda tar-ramel u jitlaħlaħ kwalunkwe ilma maħmuġ li jifdal qabel ma jerġa' lura għall-modalità FILTER. |
| SKART | Bypasses the filter and sends water directly from the pump to the waste line. Used for vacuuming heavy debris directly to waste or lowering pool water level. |
| RIĊIRKOLA | Bypasses the filter and circulates water directly back to the pool. Used for chemical mixing without filtering. |
| MAGĦLUQ | Shuts off all flow to the filter and pool. Do not operate the pump with the valve in this position. |
4.2 L-Istartjar Inizjali
- Ensure all plumbing connections are secure.
- Set the multiport valve to the BACKWASH pożizzjoni.
- Turn on the pump and backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
- Itfi l-pompa.
- Set the multiport valve to the LAĦLA pożizzjoni.
- Ixgħel il-pompa u laħlaħ għal 30-60 sekonda.
- Itfi l-pompa.
- Set the multiport valve to the FILTRI pożizzjoni.
- Turn on the pump. Note the initial pressure reading on the gauge. This is your clean filter operating pressure.
5. Manutenzjoni
5.1 Backwashing
Backwash the filter when the pressure gauge reads 8-10 PSI above the clean filter operating pressure, or when water clarity diminishes. Follow the steps outlined in "Initial Startup" for backwashing and rinsing.
5.2 Sostituzzjoni tar-Ramel
Filter sand typically needs replacement every 3-5 years, depending on usage and water quality. Consult a pool professional for this procedure.
5.3 Winterization
In freezing climates, the filter must be drained and winterized to prevent damage. Consult your local pool professional for proper winterization procedures.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Qari tal-Gauge tal-Pressjoni Għolja | Dirty filter media; clogged skimmer/pump basket. | Backwash the filter; clean skimmer and pump baskets. |
| Low Pressure Gauge Reading / Low Flow | Clogged pump impeller; air leak in suction line; pump not primed. | Check/clean impeller; inspect plumbing for leaks; re-prime pump. |
| Water Returning to Pool is Cloudy | Insufficient backwashing; damaged laterals; incorrect sand type/amount. | Perform thorough backwash/rinse; inspect laterals; verify sand specifications. |
| Water Leaking from Multiport Valve | Worn O-rings/gaskets; loose clamp. | Inspect and replace O-rings/gaskets; tighten clamp. |
7. Speċifikazzjonijiet
- Ditta: Enamel
- Mudell: MFV Top Mount Sand Filter
- Pressjoni operattiva massima: 40 PSI / 2.8 BAR
- Temperatura massima: 50°C (122°F)
- Suggested Media Size: 0.5-0.8mm
- Tip ta' Konnessjoni: Universal Standard Union Connection
- Tip ta 'valv: Multiport Valve with 6 Functions
- Materjal tat-Tank: Polyethylene ta ' Densità Għolja
- ASIN: B083XL2PTV
- Data L-Ewwel Disponibbli: 15 ta’ Jannar 2020
8. Garanzija u Appoġġ
For specific warranty details, please refer to the warranty card included with your product or contact Emaux customer support directly. Keep your proof of purchase for warranty claims.
For technical assistance, spare parts, or further inquiries, please contact your authorized Emaux dealer or visit the official Emaux websit.
