Introduzzjoni
This manual provides instructions for the safe and proper use of your Nerf Elite 2.0 Echo CS-10 Blaster. Please read all instructions carefully before operation.
Informazzjoni dwar is-Sigurtà
- TWISSIJA: Do not aim at eyes or face. Use only official NERF darts. Other darts may not meet safety standards. Do not modify darts or blaster.
- Rakkomandat għall-etajiet ta '8 u' l fuq.
- Eyewear recommended (not included).
X'hemm fil-Kaxxa
- Nerf Elite 2.0 Echo CS-10 Blaster
- Removable Stock
- Removable Barrel Extension
- Klipp ta' 10 Darts
- 24 Official Nerf Darts
- Manwal ta' Istruzzjoni
Image: The complete Nerf Elite 2.0 Echo CS-10 Blaster with its included 24 darts.
Setup
1. Attaching the Stock
Align the removable stock with the attachment point at the rear of the blaster. Push firmly until it clicks into place.
Image: A person attaching the stock component to the main body of the Nerf blaster.
2. Attaching the Barrel Extension
Align the removable barrel extension with the front of the blaster. Push firmly until it clicks into place.
Image: A person attaching the barrel extension to the front of the Nerf blaster.
3. Loading the 10-Dart Clip
Insert the 24 official Nerf darts into the 10-dart clip. Ensure darts are fully seated. The blaster comes with 14 extra darts for reloads.
Image: A visual representation of the 10-dart clip and the 24 included darts.
Image: Hands demonstrating how to load individual darts into the 10-dart clip.
4. Inserting the Loaded Clip
Insert the loaded 10-dart clip into the blaster's magazine well until it locks into place. Ensure the priming slide is pulled back before inserting the clip to prevent jamming.
Image: A person inserting a loaded 10-dart clip into the magazine well of the Nerf blaster.
Operating the Blaster
1. Single-Shot Firing
- Pull the orange priming slide backward until it locks.
- Aim at your target (avoiding eyes and face).
- Press the trigger to fire one dart.
Image: Close-up of the orange priming slide on the Nerf blaster, indicating its movement.
2. Slam-Fire Action
- Hold down the trigger.
- Rapidly move the priming slide backward and forward to continuously fire darts.
3. Personalizzazzjoni
The blaster features 4 tactical rails for attaching other Nerf accessories (sold separately). The stock and barrel extension are removable, allowing for multiple configurations.
Image: Diagram showing four different configurations of the Nerf blaster using its removable stock and barrel extension.
Video: An official demonstration of the Nerf Elite 2.0 Echo CS-10 Blaster, showcasinil-karatteristiċi u l-operat tiegħu.
4. Firing Range
The Nerf Elite 2.0 Echo CS-10 Blaster can fire darts up to 90 feet (27 meters).
Image: Graphic indicating the blaster's maximum firing range of 90 feet or 27 meters.
Manutenzjoni
- Keep the blaster clean and free of debris.
- Store darts in a clean, dry place to maintain their performance.
- Do not use damaged or non-official darts, as this can cause jamming or damage to the blaster.
Issolvi l-problemi
Dart Jams
If a dart jams, ensure the priming slide is fully pulled back. Remove the clip, clear any jammed darts from the firing mechanism, and reinsert the clip with the slide still pulled back. Ensure only official, undamaged darts are used.
Clip Release Issues
If the clip does not release easily, ensure the priming slide is pulled back. The clip release button is located near the trigger.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | E9533 |
| Dimensjonijiet tal-Prodott | 2.63 x 27 x 12.5 pulzieri |
| Piż tal-oġġett | 2.43 liri |
| Età Rakkomandata | 8 snin 'il fuq |
| Dart Capacity | 10-dart clip (24 darts included) |
| Firing Range | Sa 90 pied (27 metri) |
Garanzija u Appoġġ
For warranty information or customer support, please refer to the manufacturer's website or contact their customer service department. Keep your purchase receipt for proof of purchase.
