1. Prodott Aktarview
The TESmart HKS202-E23 is an HDMI KVM switch designed to manage two computers with two monitors and a single set of keyboard and mouse. It supports high-resolution video up to 4K@60Hz and includes features for enhanced compatibility and user convenience.
Figure 1: TESmart HDMI KVM Switch HKS202-E23 and included accessories.
2. Karatteristiċi ewlenin
- Appoġġ għall-Monitor Doppju: Connects 2 computers to 2 monitors, supporting extended, mirrored, or respective display modes.
- Riżoluzzjoni Għolja: Supports up to 3840x2160 (4K) @60Hz, 3440x1440@100Hz, and 1920x1080@240Hz. Compatible with 3D, HDR10, HDCP2.2, and Dolby Vision.
- Emulaturi EDID: Ensures correct display information is always sent to computers, preventing display setting changes during input switching.
- Swiċċjar Flessibbli: Offers three methods for switching between computers: IR remote control, front panel button, and keyboard hotkeys.
- Kompatibbiltà Wiesgħa: Works with Unix, Windows, Debian, Ubuntu, Fedora, Mac OS X, Raspbian, and other Linux-based systems.
- USB Peripheral Sharing: Includes a USB 2.0 port for sharing USB hubs, drives, printers, or scanners across connected devices. Dedicated keyboard and mouse ports support wired, wireless (2.4G receiver), mechanical, multimedia, and gaming keyboards/mice (Bluetooth not supported).
- Output Awdjo: Features a 3.5mm audio jack with a built-in DAC chip for stereo audio output.
- Hot Plug Support: Allows adding or removing devices without powering off the KVM switch or connected devices.
3. Kontenut tal-Pakkett
The TESmart HDMI KVM Switch HKS202-E23 package includes:
- 1x 2x2 HDMI KVM Switch
- 2x 5ft (HDMI+USB-B) cables
- 2x 5ft HDMI cables
- 1x IR remote control (AAA batteries not included)
- 1x DC 12V adapter tal-enerġija
- 1x Manwal għall-utent
4. Istruzzjonijiet ta' Setup
Follow these steps to connect your TESmart HDMI KVM Switch:
- Konnessjoni tal-Enerġija: Connect the DC 12V power adapter to the KVM switch's DC 12V port.
- Konnessjonijiet tal-Monitoraġġ: Connect your two monitors to the 'Display 1' and 'Display 2' HDMI output ports on the KVM switch.
- Konnessjoni tal-Kompjuter 1:
- Connect one end of an (HDMI+USB-B) cable to the 'Input A PC 1' HDMI port and the USB-B port on the KVM switch.
- Connect the other end of the HDMI cable to an HDMI output on PC 1.
- Connect the other end of the USB-B cable to a USB port on PC 1.
- If PC 1 has a second HDMI output, connect it to the 'Input B PC 1' HDMI port on the KVM switch using a standard HDMI cable.
- Konnessjoni tal-Kompjuter 2:
- Connect one end of an (HDMI+USB-B) cable to the 'Input A PC 2' HDMI port and the USB-B port on the KVM switch.
- Connect the other end of the HDMI cable to an HDMI output on PC 2.
- Connect the other end of the USB-B cable to a USB port on PC 2.
- If PC 2 has a second HDMI output, connect it to the 'Input B PC 2' HDMI port on the KVM switch using a standard HDMI cable.
- Tastiera u maws: Connect your keyboard and mouse to the dedicated USB ports on the KVM switch. For wireless keyboards/mice, plug the 2.4G receiver into one of these dedicated ports.
- Additional USB Devices: Connect other USB peripherals (e.g., USB hub, printer, scanner) to the USB 2.0 port on the KVM switch.
- Apparat Awdjo: Connect headphones or speakers to the 3.5mm L/R audio output port.
Figure 2: Detailed diagram of KVM switch input ports and connections.
Video 1: TESmart Dual HDMI 4x2 Dual Monitor KVM Switch 2 Port 4K@60Hz setup guide.
5. Istruzzjonijiet Operattivi
The TESmart KVM switch offers multiple ways to control your connected devices.
5.1 Tibdil bejn Kompjuters
You can switch between PC1 and PC2 using one of the following methods:
- Buttuna tal-Panew ta' Quddiem: Press the 'Selection' button on the front panel of the KVM switch.
- Kontroll mill-bogħod IR: Use the provided IR remote control to select the desired PC input.
- Hotkeys tat-tastiera: Use predefined keyboard combinations to switch inputs. Refer to the user manual for specific hotkey combinations.
Figura 3: Aktarview of available switching methods.
5.2 Modi tal-Wiri
The KVM switch supports two primary display modes:
- Mode 1: One PC Across Two Monitors (Extended or Mirrored): Both monitors display content from a single PC, either extending the desktop or mirroring the display.
- Mode 2: Two PCs on Two Monitors (Respective Display): Each monitor displays content from a different PC.
Figure 4: Illustration of the two display modes.
5.3 Għażla tal-Output tal-Awdjo
To select the correct audio output device:
- Right-click on the 'Sound settings' icon in the lower right corner of your desktop and open the sound settings.
- Select the correct audio output device. The audio will then be routed through the L/R port on the KVM switch.
6 Issolvi l-problemi
- Ebda Wiri/Teptip: Ensure all HDMI and USB cables are securely connected. Verify that your laptop is capable of dual monitor output. If using adapters (e.g., DisplayPort to HDMI), ensure they are compatible and configured correctly (e.g., NVIDIA control panel dynamic range from limited to full). Try powering the KVM unit off and back on.
- Kwistjonijiet tat-Tastiera/Maws: Ensure wired or 2.4G wireless (with receiver) keyboards/mice are plugged into the dedicated K&M ports for seamless switching. Bluetooth devices are not supported. If using a mouse with extra buttons and experiencing input issues, try plugging the mouse into a generic USB 2.0 port instead of the dedicated mouse port.
- Display Settings Change: The built-in EDID emulators should prevent display setting changes when switching inputs in extended display mode. If this occurs, verify connections and KVM settings.
- Il-Bdil tal-Hotkeys Mhux Jaħdem: If your keyboard is connected to the USB 2.0 port, hotkey switching may not be supported. Connect the keyboard to a dedicated K&M port.
- Purple Screen/Inconsistent Signal: This can indicate a cable issue, an incompatible adapter, or a problem with the KVM unit itself. Try different HDMI cables, ensure adapters are high-quality and compatible, and power cycle the KVM.
7. Speċifikazzjonijiet
- Numru tal-Mudell: HKS202-E23
- Dimensjonijiet tal-Prodott: 11.81 x 4.33 x 1.18 pulzieri
- Piż: 1 Lira
- Materjal: Metall
- Modalità ta' Operazzjoni: ON-OFF
- Klassifikazzjoni kurrenti: 2 Amps
- Vol Operattivtage: 12 Volts (DC)
- Tip ta' swiċċ: Imbotta Buttuna
- L-Ewwel Disponibbli: 8 ta’ Jannar, 2020
8. Garanzija u Appoġġ
The TESmart HDMI KVM Switch HKS202-E23 comes with a 1-year warranty. For any questions or concerns, please contact the TESmart customer experience design team.
