Introduzzjoni
This manual provides detailed instructions for the safe installation, operation, and maintenance of your ProCom Dual Fuel Ventless Gas Fireplace System with Mantle. This system is designed to operate efficiently using either Natural Gas (NG) or Liquid Propane (LP) and features a thermostat control for consistent heating. Please read all instructions carefully before installation and use.
Immaġni: Quddiem view of the ProCom Dual Fuel Ventless Gas Fireplace System in Antique White, showcasing the mantle and the firebox with realistic logs and flames.
Informazzjoni dwar is-Sigurtà
TWISSIJA: Installazzjoni, aġġustament, alterazzjoni, servizz jew manutenzjoni mhux xierqa jistgħu jikkawżaw korriment jew ħsara lill-proprjetà. Irreferi għal dan il-manwal. Għal assistenza jew informazzjoni addizzjonali, ikkonsulta installatur kwalifikat, aġenzija tas-servizz, jew il-fornitur tal-gass.
- Dan l-apparat huwa għall-użu fuq ġewwa biss.
- Taħżinx jew tużax gażolina jew fwar u likwidi oħra li jaqbdu fil-viċinanza ta' dan jew kwalunkwe apparat ieħor.
- Minħabba temperaturi għoljin, l-apparat għandu jkun jinsab barra mit-traffiku u 'l bogħod mill-għamara u d-drappijiet.
- It-tfal u l-adulti għandhom jiġu mwissija dwar il-perikli ta’ temperaturi għoljin tal-wiċċ u għandhom joqogħdu 'l bogħod biex jevitaw ħruq jew tqabbid tal-ħwejjeġ.
- It-tfal żgħar għandhom ikunu sorveljati bir-reqqa meta jkunu fl-istess kamra bħall-apparat.
- Tpoġġix ħwejjeġ jew materjal ieħor li jaqbad fuq jew ħdejn l-apparat.
- This appliance is equipped with an Oxygen Depletion Sensor (ODS) safety system. Do not attempt to bypass or tamper with the ODS.
- Ensure adequate ventilation as specified in the installation instructions.
Setup u Installazzjoni
Spakkjar u Spezzjoni
Carefully remove all components from the packaging. Inspect for any shipping damage. If any damage is found, contact your retailer immediately. Ensure all parts listed in the "What's in the Box" section are present.
- Ventless Fireplace Insert - Qty. 1
- Ceramic Fiber Log Set - Qty. 1 (4 realistic hand painted Concrete Logs)
- Hardware Pack - Qty. 1
- Fireplace Mantel (Antique White Furniture Grade Finish) - Qty. 1
Assemblea
Some assembly is required for the mantle and the fireplace insert. Refer to the general assembly instructions provided with the product. Ensure the fireplace insert is securely placed within the mantle.
Image: The ProCom fireplace system integrated into a living room setting, demonstrating its aesthetic appeal.
Fuel Type Selection (Dual Fuel Technology)
This fireplace system is designed for use with either Natural Gas (NG) or Liquid Propane (LP). It is crucial to select the correct fuel type and ensure the appliance is configured accordingly before connecting to a gas supply.
Importanti: Conversion between NG and LP must be performed by a qualified service technician. Incorrect conversion can lead to unsafe operation and void the warranty.
Image: Close-up of the gas inlet ports, labeled NG (Natural Gas) and LP (Liquid Propane), showing the blue cap for LP. This indicates the current configuration or the port for LP connection.
Image: Close-up of the gas inlet ports, labeled NG (Natural Gas) and LP (Liquid Propane), showing both yellow and blue caps. This illustrates the dual fuel capability and the distinct caps for each gas type.
Konnessjoni tal-Gass
Connect the fireplace to the appropriate gas supply (Natural Gas or Liquid Propane) using approved gas connectors and fittings. Ensure all connections are tight and leak-free. A gas pressure test must be performed by a qualified technician.
- Maximum inlet gas pressure: 1/2 PSIG (3.5 kPa).
Istruzzjonijiet Operattivi
Startup Inizjali
- Kun żgur li l-valv tal-provvista tal-gass ikun miftuħ.
- Press and hold the control knob (refer to image below) to the "PILOT" position.
- While holding the knob, press the Piezo ignitor button repeatedly until the pilot flame ignites.
- Continue to hold the control knob for approximately 30-60 seconds after the pilot ignites to allow the thermocouple to heat up.
- Itlaq il-pum tal-kontroll. Jekk il-fjamma pilota tintefa, irrepeti l-passi 2-4.
Image: Close-up of the control panel showing the main control knob with settings for "OFF", "PILOT", and numbered temperature settings (1-5), alongside the Piezo ignitor button.
Thermostat Control Operation
Once the pilot is lit, turn the control knob to the desired temperature setting (1-5). The thermostat will automatically cycle the main burner on and off to maintain the set room temperature. Setting 1 is the lowest heat output, and setting 5 is the highest.
- 15,000 BTU Maximum Output: Heats up to 600 square feet.
- 99.9% Efficient: Provides economical supplemental heat.
Shutting Down the Fireplace
- To turn off the main burner, turn the control knob to the "PILOT" position. The pilot flame will remain lit.
- To completely turn off the fireplace, turn the control knob to the "OFF" position. This will extinguish both the main burner and the pilot flame.
- For extended periods of non-use, it is recommended to close the main gas supply valve.
Manutenzjoni
Tindif Ġenerali
- Żomm iż-żona tal-apparat ċara u ħielsa minn materjali kombustibbli, gażolina, u fwar u likwidi oħra li jaqbdu.
- Periodically clean the exterior surfaces of the mantle with a soft, damp drapp. Evita cleaners li joborxu.
- Ensure the air openings of the appliance are not obstructed.
Log Set Care
The ceramic fiber logs are designed for durability. Handle them carefully to avoid breakage. Do not rearrange the logs from their factory-set positions, as this can affect flame appearance and efficiency.
Spezzjoni Annwali
It is recommended to have the fireplace inspected annually by a qualified service technician to ensure proper operation and safety.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-pilota mhux se jixgħel |
|
|
| Pilot lights but main burner will not ignite |
|
|
| Fireplace produces odors |
|
|
If troubleshooting steps do not resolve the issue, contact a qualified service technician or ProCom customer support.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | ProCom |
| Isem tal-Mudell | Fjuwil Doppju |
| Numru tal-Mudell tal-Oġġett | PCS150T-1-AW |
| Output tas-Sħana | 15,000 Unità Termali Brittanika (BTU) |
| Kopertura tat-Tisħin | Sa 600 pied kwadru. |
| Tip ta' Fjuwil | Gass Naturali (NG) jew Propan Likwidu (LP) |
| Effiċjenza | 99.9% Vent Free |
| Tip ta' Kontroll | Kontroll tat-termostat |
| Tip ta 'Tqabbid | Battery-assisted Piezo ignition |
| Karatteristiċi tas-Sigurtà | Oxygen Depletion Sensor (ODS) |
| Dimensjonijiet tal-Prodott | 12.5"D x 28"W x 36.5"H |
| Piż tal-oġġett | 84.5 Liri |
| Materjal | Wood (mantle), Concrete (logs) |
| Kulur | Abjad Antikitajiet |
| Komponenti Inklużi | Burner, Log Set, Mantel |
| Assemblea Meħtieġa | Yes (General assembly instructions provided) |
Informazzjoni dwar Garanzija
This ProCom Dual Fuel Ventless Gas Fireplace System is covered by a Garanzija Limitata ta' Sena. For specific terms and conditions, please refer to the warranty documentation included with your product or contact ProCom customer support.
Appoġġ għall-Klijent
For technical assistance, parts, or warranty claims, please contact ProCom customer support. Have your model number (PCS150T-1-AW) and purchase date available when contacting support.
Manifattur: ProCom
Refer to the product packaging or the official ProCom webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.
