1. Prodott Aktarview
The Belimo Z215S-230 is a compact, motorised 2-way zone valve designed for precise control in heating, ventilation, and air conditioning (HVAC) systems. It is suitable for both open and closed cold and warm water systems, commonly found in fan coil units and VAV (Variable Air Volume) boxes. This valve is de-energised closed (NC), meaning it returns to a closed position when power is removed.
Figure 1: Belimo Z215S-230 Motorised 2-Way Valve with Actuator. This image shows the valve from a top-down perspective, highlighting the brass valve body with a 'FLOW' arrow and the black actuator housing with orange wiring.
Figure 2: Belimo Z215S-230 Motorised 2-Way Valve. This image provides a side view of the valve, clearly showing the product label on the actuator housing with detailed specifications such as power supply, max temperature, and pressure ratings.
Karatteristiċi ewlenin:
- Tip: 2-way zone valve with internal thread.
- Applikazzjoni: Suitable for open and closed cold and warm water systems.
- Funzjoni: De-energised closed (NC) operation.
- Kompatibilità: Designed for fan coil and VAV box applications.
- Konnessjoni: 15mm nominal diameter.
2. Informazzjoni dwar is-Sigurtà
Please read all safety instructions carefully before installation, operation, or maintenance of the Belimo Z215S-230 valve. Failure to comply with these instructions may result in property damage, injury, or death.
- L-installazzjoni u l-manutenzjoni għandhom isiru minn persunal kwalifikat biss.
- Disconnect power supply before performing any wiring or maintenance.
- Ensure the valve is installed in an environment within its specified operating temperature and pressure limits.
- Do not expose the valve to corrosive substances or extreme vibrations.
- Ivverifika l-vol korretttage and wiring connections as per the product label and wiring diagram.
3. Installazzjoni
Lista ta' kontroll ta' qabel l-installazzjoni:
- Ensure the valve size (15mm) matches the piping system.
- Verify the system pressure and temperature are within the valve's specifications.
- Confirm the power supply (230V AC, 50/60Hz) is available and matches the actuator requirements.
- Have appropriate tools for installation (wrenches, wire strippers, etc.).
Istruzzjonijiet għall-Immuntar:
- Flush the piping system thoroughly to remove any debris before installing the valve.
- Install the valve in a location that allows for easy access for wiring, maintenance, and manual override (if applicable).
- Kun żgur li l-vleġġa tad-direzzjoni tal-fluss fuq il-korp tal-valv tkun allinjata mal-fluss tal-fluwidu tas-sistema.
- Thread the valve into the piping system, ensuring a tight, leak-free connection. Use appropriate thread sealant if necessary.
- Do not apply excessive torque to the actuator housing during installation; tighten only the valve body.
Konnessjonijiet tal-Wiring:
The Belimo Z215S-230 valve requires a 230V AC power supply. Refer to the wiring diagram on the actuator label for precise connections. Typically, these valves have two wires for power (Live and Neutral) and may have an additional wire for control signal depending on the specific model variant. Ensure all connections are secure and insulated.
- Connect the Live (L) wire to the designated terminal.
- Connect the Neutral (N) wire to the designated terminal.
- Ensure proper grounding if a ground terminal is present.
- Verify all wiring against local electrical codes and standards.
4. Operazzjoni
The Belimo Z215S-230 is a motorised valve designed for automatic operation based on a control signal (e.g., from a thermostat or building management system). As a de-energised closed (NC) valve, it will remain closed when no power is supplied to the actuator.
Operazzjoni Bażika:
- Once correctly installed and wired, apply power to the actuator.
- Upon receiving a control signal (e.g., a call for heating/cooling), the actuator will energise and open the valve, allowing fluid flow.
- When the control signal is removed or power is cut, the actuator will de-energise, and the valve will return to its closed position.
- Observe the flow indicator (if present) or listen for fluid movement to confirm valve operation.
5. Manutenzjoni
The Belimo Z215S-230 valve is designed for long-term, reliable operation with minimal maintenance. However, periodic checks can help ensure optimal performance.
Manutenzjoni ta' Rutina:
- Spezzjoni Viżwali: Periodically inspect the valve and actuator for any signs of leaks, corrosion, or physical damage.
- Kontroll tal-Konnessjoni: Kun żgur li l-konnessjonijiet elettriċi kollha jibqgħu sikuri u ħielsa mill-korrużjoni.
- Kontroll Operattiv: Cycle the valve manually or via the control system to confirm smooth opening and closing.
- Tindif: Keep the exterior of the actuator free from dust and debris.
No internal lubrication or disassembly of the actuator is required or recommended. If the valve or actuator malfunctions, it should be replaced by a qualified technician.
6 Issolvi l-problemi
This section provides guidance for common issues encountered with the Belimo Z215S-230 valve. For complex problems, contact a qualified HVAC technician.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Valve does not open/close | No power to actuator Wiring mhux korrett Actuator failure Valve jammed by debris | Check power supply and circuit breaker Ivverifika l-wajers mad-dijagramma Ibdel l-attwatur Flush system or replace valve |
| Valve tnixxijiet | Improperly tightened connections Damaged valve body/seals | Issikka l-konnessjonijiet (tissikkax iżżejjed) Ibdel il-valv |
| Valve makes unusual noise | Debris in valve Excessive pressure/flow Ħsara fl-attwatur | Flush system Check system design and balance Ibdel l-attwatur |
7. Speċifikazzjonijiet Tekniċi
Below are the key technical specifications for the Belimo Z215S-230 Motorised 2-Way Valve:
| Speċifikazzjoni | Valur |
|---|---|
| Brand | Belimo |
| Numru tal-Mudell | Z215S-230 |
| Tip ta' Valv | 2-Way Zone Valve |
| Tip ta' Konnessjoni | Thread Intern |
| Dijametru Nominali | 15mm |
| Provvista tal-Enerġija | 230V AC, 50/60Hz |
| Operazzjoni | De-energised Closed (NC) |
| Tip ta' Konnessjoni tad-Dħul | Flanġ |
| Tip ta' Konnessjoni tal-Ħut | Flanġ |
| Speċifikazzjoni Met | NSF |
| L-Ewwel Data Disponibbli | 26 ta’ Diċembru 2019 |
8. Garanzija u Appoġġ
Belimo products are manufactured to high-quality standards. Specific warranty terms and conditions for the Z215S-230 valve are typically provided at the point of purchase or can be obtained directly from Belimo or an authorised distributor. Please retain your proof of purchase for warranty claims.
For technical support, service, or spare parts, please contact your local Belimo representative or the distributor from whom the product was purchased. Provide the model number (Z215S-230) and any relevant serial numbers when seeking assistance.
