SCAME 205.W17-B0

Manwal tal-Utent tal-Ċarġer tal-EV Smart Wallbox SCAME 205.W17-B0

Model: 205.W17-B0

1. Introduzzjoni

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the SCAME Smart Wallbox EV Charger, model 205.W17-B0. This device is designed for wall mounting and facilitates the charging of electric vehicles (EVs) using a Type 2 socket. Please read this manual thoroughly before installation and use.

2. Informazzjoni dwar is-Sigurtà

Always observe the following safety precautions to prevent injury, damage to the product, or property damage:

3. Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti u mhux imħassra meta tiftaħ il-pakkett:

4. Prodott Aktarview

The SCAME Smart Wallbox is a robust charging solution housed in a halogeenvrije technopolymeer (halogen-free technopolymer) casing, designed for durability and safety. It features an integrated display for status indication and a Type 2 socket for vehicle connection.

SCAME Smart Wallbox EV Charger front view

Figura 1: Quddiem view of the SCAME Smart Wallbox EV Charger. This image shows the compact grey technopolymer housing with the integrated display and the Type 2 charging socket clearly visible on the front panel.

Komponenti Ewlenin:

5. Installazzjoni

The SCAME Smart Wallbox is designed for wall mounting. Follow these steps for a safe and correct installation:

  1. Għażla tas-Sit: Choose a suitable location for wall mounting, ensuring it is protected from direct impact and accessible for vehicle charging. The wall must be capable of supporting the weight of the Wallbox.
  2. Skonnettjar tal-Enerġija: Kun żgur li l-provvista ewlenija tal-enerġija għaż-żona tal-installazzjoni tkun skonnettjata kompletament qabel ma tipproċedi.
  3. Immuntar: Securely mount the Wallbox to the wall using appropriate fasteners. The unit is designed for robust wall attachment.
  4. Konnessjoni Elettrika: Connect the Wallbox to the electrical supply (1PNT 32A 230V AC) via the internal terminal block (3x6mm²). Ensure correct polarity and secure connections. All wiring must comply with local electrical codes.
  5. L-ertjar: Ensure the Wallbox is properly grounded to prevent electrical hazards.
  6. Spezzjoni: After installation, visually inspect all connections and ensure the housing is securely closed.
  7. Restawr tal-Enerġija: Restore power to the circuit and verify the Wallbox powers on correctly.

6. Operazzjoni

Operating the SCAME Smart Wallbox is straightforward:

  1. Connect the Vehicle: Plug the Type 2 charging cable into the Wallbox's Type 2 socket, then connect the other end to your electric vehicle's charging port.
  2. Ibda l-Iċċarġjar: Press the charging button on the Wallbox. The display will show the charging status, and the RGB LED strip will indicate active charging.
  3. Iċċarġjar tal-Monitorja: The integrated display provides real-time information such as charging power, duration, and energy delivered.
  4. Waqqaf l-Iċċarġjar: To stop charging, press the charging button again or disconnect the cable from the vehicle (if the vehicle allows). Always disconnect the cable from the vehicle first, then from the Wallbox.
  5. Safety Shutter: The Type 2 socket is equipped with a safety shutter to prevent accidental contact and ingress of foreign objects when not in use.

7. Manutenzjoni

Regular maintenance ensures optimal performance and longevity of your SCAME Smart Wallbox:

8 Issolvi l-problemi

If you encounter issues with your SCAME Smart Wallbox, refer to the following common problems and solutions:

ProblemaKawża PossibbliSoluzzjoni
Wallbox does not power on.Ebda provvista tal-enerġija; circuit breaker li qata’; wajers difettużi.Check the main power supply and circuit breaker. Verify wiring connections (consult a qualified electrician).
L-iċċarġjar ma jibdiex.Cable not properly connected; vehicle not ready to charge; Wallbox error.Ensure the charging cable is securely connected to both the Wallbox and the vehicle. Check vehicle's charging settings. Restart the Wallbox by cycling power.
L-iċċarġjar jieqaf ħesrem.Vehicle fault; power fluctuation; internal Wallbox error.Check vehicle's dashboard for error messages. Inspect power supply. Restart the charging process. If persistent, contact support.
Id-displej juri kodiċi ta' żball.Ħsara interna speċifika.Refer to the specific error code documentation (if available) or contact SCAME customer support with the error code.

If the problem persists after attempting these solutions, please contact SCAME customer support or a qualified service technician.

9. Speċifikazzjonijiet

KaratteristikaSpeċifikazzjoni
Numru tal-Mudell205.W17-B0
BrandSCAMME
Charging Socket TypeType 2 (IEC EN 62196-2)
Konfigurazzjoni1PNT
Kurrent nominali32 Ampere
Vol nominalitage230V AC
Qawwa tal-Iċċarġjar7.4 kW
Frekwenza Operattiva50-60 Hz
Tip ta' InstallazzjoniImwaħħal mal-ħajt
MaterjalHalogen-free Technopolymer
KulurGriż
Dimensjonijiet (madwar)235x370x115mm
Klassi ta' ProtezzjoniIP54
Protezzjoni tal-ImpattIK08
KonformitàCE, EN61851-1 (Mode 3 charging)

10. Garanzija u Appoġġ

SCAME products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or visit the official SCAME website. For technical support, troubleshooting assistance, or spare parts, please contact your authorized SCAME dealer or customer service representative. When contacting support, please have your product model number (205.W17-B0) and purchase details readily available.

Dokumenti Relatati - 205.W17-B0

Preview Scame BE-D Series DC Wallbox User Manual
User manual for the Scame BE-D Series DC Wallbox, providing detailed information on installation, operation, charging process, connectivity, product specifications, standards, and troubleshooting for electric vehicle charging stations.
Preview Manwal tal-Utent u l-Installazzjoni tal-Istazzjon tal-Iċċarġjar tal-Vetturi Elettriċi tas-Serje SCAME BE-M
Manwal komprensiv għall-utent u l-installazzjoni għall-istazzjonijiet tal-iċċarġjar tal-vetturi elettriċi tas-Serje SCAME BE-M, li jkopri l-karatteristiċi, l-ispeċifikazzjonijiet, is-sigurtà, l-installazzjoni, it-tħaddim, is-soluzzjoni tal-problemi, u r-rimi. Jinkludi dettalji tekniċi u informazzjoni dwar il-konformità.
Preview Manwal tal-Utent tas-SERJE SCAME BE-W[2.0]
Manwal komprensiv għall-utent għall-istazzjonijiet tal-iċċarġjar tas-SERJE SCAME BE-W[2.0], li jkopri l-installazzjoni, it-tħaddim, il-manutenzjoni u s-soluzzjoni tal-problemi.
Preview Gwida għall-Utent tal-Kontrollur tat-Temperatura u l-Umdità SCAME
Gwida komprensiva għall-utent li tiddettalja l-operazzjoni, is-settings, u l-wajers tal-Kontrollur tat-Temperatura u l-Umdità SCAME għal applikazzjonijiet ta' kontroll ambjentali.
Preview Manuale d'Uso Stazioni di Ricarica AC SCAME
Guida completa all'installazione, operat e manutenzjoni delle stazioni di ricarica AC SCAME. Inkludi dettagli su modalità operative, gestione utenti, cablaggio, settings di rete e resolution anomalie.
Preview SCAME Serie LIBERA ART. 204.CAxxx Stazzjon tal-Iċċarġjar tal-EV: Gwida għall-Immuntar, il-Wajers, u t-Tħaddim
Gwida komprensiva għall-istazzjon tal-iċċarġjar tal-EV SCAME Serie LIBERA ART. 204.CAxxx, li tiddettalja l-immuntar, il-wajers, l-ispeċifikazzjonijiet elettriċi, il-modi ta' tħaddim (Bla Ħlas u Personali), u noti importanti. Tinkludi informazzjoni ta' kuntatt u link biex tniżżel il-manwal sħiħ tal-utent.