1. Introduzzjoni
Thank you for choosing the EBL C9010N 8-Bay Battery Charger. This charger is designed for efficient and safe charging of NiMH and NiCD AA/AAA rechargeable batteries. It features independent charging slots, smart detection, and multiple safety protections to ensure optimal battery life and user safety. Please read this manual thoroughly before use to ensure proper operation and maintenance.
2. Informazzjoni dwar is-Sigurtà
- Only charge NiMH and NiCD rechargeable batteries. Do not attempt to charge alkaline, carbon-zinc, or any other type of battery, as this may lead to leakage, rupture, or explosion.
- Żarmax jew timmodifikax il-ċarġer.
- Do not expose the charger to rain or moisture. Use in dry indoor conditions only.
- Żomm fejn ma jintlaħaqx mit-tfal.
- Ensure proper polarity (+/-) when inserting batteries into the charger.
- Skonnettja l-ċarġer mis-sors tal-enerġija meta ma jkunx qed jintuża jew qabel ma tnaddaf.
- If the charger or batteries become excessively hot during charging, discontinue use immediately and contact customer support.
3. Prodott Aktarview
Figure 3.1: The EBL C9010N 8-Bay Battery Charger, shown with its accompanying USB-C charging cable. The charger features eight individual slots for AA or AAA batteries and LED indicators above each slot.
The EBL C9010N charger is designed for convenience and efficiency. It features:
- 8 Independent Charging Slots: Allows charging of 1 to 8 AA or AAA NiMH/NiCD batteries simultaneously or individually.
- Input USB-C: Modern and versatile input for power.
- Indikaturi LED intelliġenti: Each slot has an LED that indicates charging status (Red for charging, Green for fully charged, Red flashing for error).
- Sistema Multi-Protezzjoni: Includes over-charge, over-current, over-voltage, protezzjoni kontra sħana żejda, u short circuit.
Figure 3.2: The EBL C9010N charger demonstrating its universal compatibility with various capacities of AA and AAA NiMH/NiCD batteries, highlighting its individual slot charging capability.
4. Setup
- Qabbad l-Enerġija: Plug the USB-C cable into the charger's input port. Connect the other end of the USB-C cable to a 5V/2A USB power source, such as a wall adapter, power bank, computer USB port, or car charger.
- Indikatur tal-Enerġija: When power is connected, the LED indicators on the charger will briefly light up green for 1 second, then turn off, indicating the charger is ready.
Figure 4.1: The EBL C9010N charger receiving power via its 5V/2A USB-C input, illustrating the fast charging capability.
Figure 4.2: The versatility of the EBL C9010N charger, showing it can be powered by various USB sources including a PC, wall plug, power bank, or car charger.
5. Istruzzjonijiet Operattivi
- Daħħal Batteriji: Carefully insert 1 to 8 AA or AAA NiMH/NiCD rechargeable batteries into the charging slots, ensuring correct polarity (+/-).
- Indikazzjoni tal-Iċċarġjar: The LED indicator above each slot will turn Aħmar to indicate that charging is in progress for that specific battery.
- Indikazzjoni tal-Ħlas Sħiħ: Ladarba batterija tkun iċċarġjata kompletament, l-indikatur LED korrispondenti tagħha jixgħel Aħdar.
- Sejbien ta' Żbalji: If a non-rechargeable, defective, or incorrectly inserted battery is detected, the LED will flash Aħmar for 1 second and then turn off. Remove the problematic battery immediately.
- Neħħi Batteriji: Once charging is complete (LED is Green), remove the batteries from the charger.
Figure 5.1: A visual guide to the LED indicators on the EBL C9010N charger: Red indicates charging in progress, Green indicates fully charged, and Red flashing indicates an error.
6. Manutenzjoni
- Tindif: Skonnettja l-ċarġer mis-sors tal-enerġija qabel ma tnaddaf. Uża drapp artab u niexef biex timsaħ il-wiċċ tal-ċarġer. Tużax prodotti tat-tindif jew solventi li joborxu.
- Ħażna: Aħżen il-ċarġer f'post frisk u niexef 'il bogħod mid-dawl tax-xemx dirett u temperaturi estremi.
- Kura tal-batterija: For optimal battery life, avoid over-discharging batteries. It is recommended to charge batteries before they are completely depleted.
7 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| LED does not light up when batteries are inserted. | No power connection; Incorrect battery insertion; Battery is already fully charged. | Ensure charger is properly connected to a 5V/2A USB power source. Check battery polarity. If battery is fully charged, the LED will remain off. |
| LED flashes Red. | Non-rechargeable battery; Defective battery; Short-circuit. | Remove the battery. Ensure you are using NiMH/NiCD rechargeable batteries. Try a different battery. |
| Il-batteriji ma jiċċarġjawx jew jiċċarġjaw bil-mod. | Insufficient power input; Old/worn-out batteries. | Ensure your USB power source provides 5V/2A output. Consider replacing old batteries. |
| Charger or batteries become hot. | Normal during charging; Overheating due to faulty battery or charger. | A slight warmth is normal. If excessively hot, remove batteries and unplug charger. Contact customer support if problem persists. |
8. Speċifikazzjonijiet
- Mudell: C9010N
- Input: DC 5V/2A
- Output: 1.2V DC (AA: 450mA x 8, AAA: 225mA x 8)
- Batteriji Kompatibbli: AA/AAA NiMH NiCD rechargeable batteries
- Dimensjonijiet: Madwar 0.2 x 0.2 x 0.2 pulzieri (Dimensjonijiet tal-Prodott)
- Piż: Madwar 4.9 uqija
9. Garanzija u Appoġġ
EBL provides a standard warranty for this product. For detailed warranty information, technical support, or any inquiries, please visit the official EBL website or contact their customer service directly. Please retain your purchase receipt for warranty claims.
EBL Official Store: Visit EBL Store on Amazon
