Manwal tal-Istruzzjonijiet tal-Pistola tal-Kompressur Mingħajr Fili TOTAL P20S 20V

1. Introduzzjoni u Fuqview

Thank you for choosing the TOTAL P20S 20V Cordless Compressor Gun. This electric air pump is designed for efficient inflation of various items, including vehicle tires, sports balls, and inflatable mattresses. This manual provides essential information for safe operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your tool.

Stampa 1.1: The TOTAL P20S 20V Cordless Compressor Gun. This image displays the main unit with its attached hose and inflation nozzle, ready for use. The battery is shown as a placeholder, indicating it is sold separately.

2. Istruzzjonijiet tas-Sigurtà

Dejjem segwi l-linji gwida tas-sigurtà li ġejjin biex tevita korrimenti u ħsara lill-għodda:

• Read all instructions carefully before operating the compressor gun.
• Wear appropriate personal protective equipment, such as eye protection.
• Kun żgur li ż-żona tax-xogħol tkun imdawwal sew u ħielsa minn ostakli.
• Żomm lit-tfal u lil dawk li jkunu fil-qrib 'il bogħod miż-żona tal-operat.
• Do not operate the compressor for more than 30 minuti konsekuttivi to prevent overheating. Allow the tool to cool down before resuming use.
• Always verify the recommended pressure for the item being inflated (e.g., vehicle tires, balls) from the manufacturer's specifications before inflation.
• Do not point the nozzle at yourself or others.
• Aħżen l-għodda f'post niexef u sigur, fejn ma jintlaħaqx mit-tfal.
• Use only TOTAL P20S 20V batteries and chargers with this device.

3. Komponenti tal-Prodott

The TOTAL P20S 20V Cordless Compressor Gun package includes the following items:

• 1 x Cordless Compressor Gun (Model TACLI2001)
• 1 x Ball Inflation Adapter
• 1 x Tire Inflator Nozzle

Nota: The 20V P20S battery and charger are mhux inklużi and must be purchased separately. These components are interchangeable with other tools in the TOTALTOOLS P20S range.

Stampa 3.1: The compressor gun displayed with its analog pressure gauge and included accessories: a ball inflation adapter and a tire inflator nozzle. The image also reminds that the battery and charger are not included.

4. Setup

1. Iċċarġja Batterija: Ensure your TOTAL P20S 20V battery is fully charged using a compatible TOTAL P20S charger (both sold separately).
2. Installa l-Batterija: Slide the charged battery into the battery slot at the base of the compressor gun until it clicks securely into place.
3. Attach Nozzle/Adapter: Select the appropriate inflation nozzle or adapter for the item you intend to inflate. Securely attach it to the end of the 40 cm inflation hose.
4. Iċċekkja l-Konnessjonijiet: Verify that all connections are tight to prevent air leakage during operation.

5. Istruzzjonijiet Operattivi

1. Prepare Item for Inflation: Position the item to be inflated in a stable manner.
2. Qabbad iż-Żennuna: Firmly attach the selected nozzle or adapter to the valve of the item you are inflating.
3. Pressjoni tal-monitor: The compressor gun features an analog pressure gauge. Continuously monitor the pressure reading during inflation to avoid over-inflation. The maximum supported pressure is 150 Psi / 10 Bar.
4. Ibda l-Inflazzjoni: Press and hold the trigger to begin inflating. Release the trigger to stop.
5. Check Recommended Pressure: Always inflate to the manufacturer's recommended pressure. For vehicle tires, this information is typically found on a sticker inside the driver's side door jamb or in the vehicle's owner's manual.
6. Evita sħana żejda: Do not operate the compressor for more than 30 minutes continuously. If prolonged use is required, allow the unit to cool down for at least 15-20 minutes after each 30-minute cycle.
7. Skonnettja: Once the desired pressure is reached, release the trigger and carefully disconnect the nozzle from the item's valve.

Stampa 5.1: A dettaljata view of the compressor gun's analog pressure gauge, which displays pressure in Psi and Bar, and the attached inflation nozzle. This gauge is essential for monitoring inflation levels.

6. Manutenzjoni

Regular maintenance ensures the longevity and efficient operation of your compressor gun:

• Tindif: After each use, wipe down the compressor gun with a clean, damp drapp. Tużax kimiċi ħarxa jew tindif li joborxu.
• Ħażna: Store the tool and its accessories in a dry, dust-free environment, away from direct sunlight and extreme temperatures.
• Spezzjoni tal-pajp: Periodically inspect the 40 cm inflation hose for any signs of wear, cracks, or damage. Replace if necessary.
• Kura tal-batterija: Aħżen il-batteriji f'post frisk u niexef. Taħżinx batteriji skarikati għalkollox għal perjodi twal.
• Manutenzjoni taż-żennuna: Keep inflation nozzles clean and free of debris to ensure proper sealing.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

9. Garanzija u Appoġġ

The TOTAL P20S 20V Cordless Compressor Gun (Model TACLI2001) comes with a manufacturer's warranty of 10 snin. Spare parts are also available for a period of 10 years from the date of purchase.

For technical support, warranty claims, or inquiries regarding spare parts, please contact TOTAL customer service through your retailer or the official TOTAL website. When contacting support, please have your model number (TACLI2001) and proof of purchase readily available.