Introduzzjoni
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Informazzjoni dwar is-Sigurtà
Dejjem osserva l-prekawzjonijiet ta' sigurtà li ġejjin waqt l-installazzjoni u l-użu:
- Kapaċità tal-piż: Do not exceed the maximum weight capacity of 88 lbs (40 kg). Overloading can result in serious injury or property damage.
- Wall Structure: Ensure the mounting surface (wall) can safely support the combined weight of the mount and the television.
- Elenkat UL: This product is UL Listed, indicating it meets specific safety standards.
- Assistenza Professjonali: Jekk m'intix ċert dwar xi parti tal-proċess tal-installazzjoni, ikkonsulta professjonist kwalifikat.
- Tfal: Żomm it-tfal 'il bogħod miż-żona tal-installazzjoni waqt is-setup.
- Għodod: Use appropriate tools and follow all instructions for their safe operation.
Kontenut tal-Pakkett
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Assemblea tal-Pjanċa tal-Ħajt
- Brackets tat-TV (2 biċċiet)
- Diversi Viti tat-TV (M4, M6, M8)
- Spacers and Washers
- Lag Bolts and Concrete Anchors (for specific wall types)
- Livell tal-bużżieqa
- Wrench
- Mudell ta 'Installazzjoni
Speċifikazzjonijiet
| Numru tal-Mudell | 28XTu2564 |
| Brand | MONTAĠĠ |
| Kompatibilità tad-Daqs tat-TV | 26 sa 65 pulzier |
| Kapaċità tal-piż | 88 lbs (40 kg) |
| Kompatibilità VESA | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Kompatibilità tat-Tip ta' Ħajt | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Angolu Mejjel | +5° / -13° |
| Angolu li jdur | ±45° (Maximum swivel angle depends on TV size) |
| Aġġustament tal-Livell | ±3° (Post-installation) |
| Distanza tal-Ħajt | 3" sa 15.7" |
| Materjal | Azzar Liga |
Setup u Installazzjoni
Kontrolli ta' Qabel l-Installazzjoni
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Iċċekkja l-Mudell VESA tat-TV: Locate the four mounting holes on the back of your TV and measure the horizontal and vertical distance between them. This mount supports VESA patterns from 75x75mm to 400x400mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Check Wall Type: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. Do not install on drywall alone.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Passi ta 'installazzjoni
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Figura 3: Aktarview of the 3-Step Easy Installation Process.
Pass 1: Waħħal il-parentesi mat-TV
- Poġġi t-TV tiegħek b'wiċċu 'l isfel bir-reqqa fuq wiċċ artab u nadif biex tevita li tagħmel ħsara lill-iskrin.
- Allinja l-parentesi tat-TV mat-toqob tal-immuntar fuq wara tat-TV tiegħek.
- Agħżel il-viti, il-woxers, u l-ispejsers xierqa mill-kit tal-ħardwer li jaqblu mat-toqob tal-immuntar tat-TV tiegħek.
- Securely fasten the brackets to the TV using a screwdriver. Do not overtighten.
Pass 2: Waħħal Pjanċa tal-Ħajt mal-Ħajt
- Determine the desired height and location for your TV.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Pass 3: Iddendel u Waħħal it-TV mal-Pjattaforma tal-Ħajt
- Bl-għajnuna, erfa’ bir-reqqa t-TV bil-parentesi mwaħħlin u waħħalhom mal-pjanċa tal-ħajt.
- Kun żgur li t-TV huwa mwaħħal sew mal-pjanċa tal-ħajt.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Istruzzjonijiet Operattivi
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewangoli.
L-aġġustament ViewIng Angolu
- Mejjel: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewkumdità.
- Dawwar: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewing from different areas of the room.
- Estensjoni: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Invellar: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Manutenzjoni
Manutenzjoni regolari tgħin biex tiżgura l-lonġevità u t-tħaddim sikur tal-muntatura tal-ħajt tat-TV tiegħek.
- Tindif: Imsaħ il-muntatura b'ċarruta ratba u niexfa biex tneħħi t-trab. Evita li tuża prodotti tat-tindif jew solventi li joborxu.
- Kontrolli perjodiċi: Periodically check all screws and bolts to ensure they remain tight. Re-tighten if necessary.
- Moviment: Jekk il-moviment tal-muntatura jsir iebes, jista' jiġi applikat ammont żgħir ta' lubrikant ibbażat fuq is-silikon fuq il-ġonot artikolanti.
Issolvi l-problemi
Jekk tiltaqa' ma' problemi waqt jew wara l-installazzjoni, ikkunsidra s-soluzzjonijiet komuni li ġejjin:
- TV Mhux Livell: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- Il-Muntanja Tħossha Laxka: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Diffikultà fl-Aġġustament: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Partijiet Neqsin: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Garanzija u Appoġġ
MOUNTUP TV wall mount series are backed by a 3-year protection plan. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual:
