Manwal tal-Utent tas-Swiċċ Wireless AbleNet Blue2 FT FeatherTouch

Introduzzjoni

The AbleNet Blue2 FT FeatherTouch Wireless Switch is an assistive technology device designed to provide wireless switch access to various devices, including iPads, computers, and mobile devices. It features integrated FeatherTouch switches for precise activation and offers Bluetooth connectivity for a wire-free experience. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your Blue2 FT device.

Kontenut tal-Pakkett

AbleNet Blue2 FT FeatherTouch Wireless Switch
Ħardwer tal-immuntar
USB-C charging cable (not explicitly listed but implied by USB-C port)

Apparat Matulview

Stampa 1: Fuq view of the AbleNet Blue2 FT FeatherTouch Wireless Switch. This image displays the device from above, highlighting its two large, circular, pressure-sensitive switches, one in blue and one in orange. The AbleNet logo and small indicator lights are visible in the central area between the switches.

Qiegħ view of the AbleNet Blue2 FT FeatherTouch Wireless Switch, showing regulatory information, a QR code, and four control switches for mode, light, sound, and power.

Stampa 2: Qiegħ view of the AbleNet Blue2 FT FeatherTouch Wireless Switch. This image shows the underside of the device, where regulatory information, a QR code for instructions, and four small toggle switches for mode, light feedback, sound feedback, and power (I/O) are located.

Ġenb view of the AbleNet Blue2 FT FeatherTouch Wireless Switch, showing a single USB-C port for charging.

Stampa 3: Ġenb view of the AbleNet Blue2 FT FeatherTouch Wireless Switch. This image focuses on one side of the device, clearly showing the USB-C port used for charging the unit.

Ġenb view of the AbleNet Blue2 FT FeatherTouch Wireless Switch, showing two 3.5mm input jacks labeled S1 and S2, a USB-A port, and a Bluetooth icon.

Stampa 4: Ġenb view of the AbleNet Blue2 FT FeatherTouch Wireless Switch. This image displays the opposite side of the device, featuring two 3.5mm input jacks labeled S1 and S2 for external switches, a USB-A port, and a Bluetooth icon indicating wireless connectivity.

Setup Istruzzjonijiet

1. Iċċarġjar tal-Apparat

Before initial use, fully charge your Blue2 FT device. Connect the provided USB-C cable to the charging port on the side of the device (refer to Image 3) and plug the other end into a standard USB power adapter or computer USB port. The indicator light will show charging status.

2. Tixgħil / Mitfi

Locate the I/O (Power) switch on the bottom of the device (refer to Image 2). Slide the switch to the 'On' position to power on the Blue2 FT. Slide it to 'Off' to power down.

3. Tqabbil tal-Bluetooth

Ensure the Blue2 FT is powered on.
On your target device (iPad, computer, or mobile device), navigate to the Bluetooth settings.
Fittex għal available Bluetooth devices. The Blue2 FT should appear in the list.
Select the Blue2 FT to initiate pairing. Follow any on-screen prompts to complete the connection.
Once paired, the device's indicator light will confirm a successful connection.

4. Connecting External Switches (Optional)

The Blue2 FT supports external wired switches. Connect your external switches to the 3.5mm input jacks labeled S1 and S2 on the side of the device (refer to Image 4). The device can then be configured to use either the integrated FeatherTouch switches or the external switches, or both, depending on the selected mode.

Istruzzjonijiet Operattivi

1. Using the FeatherTouch Switches

The Blue2 FT features two integrated FeatherTouch switches. These proximity sensor switches are designed for precise activation with minimal pressure. When activated, the device provides both visual (indicator light) and auditory (click sound) feedback. Simply apply light pressure or a close proximity touch to the blue or orange switch surface to send a command.

2. L-Għażla tal-Modalitajiet ta' Operazzjoni

The Blue2 FT supports multiple operating modes, allowing it to send various keyboard commands. These modes are typically selected using the mode switch on the bottom of the device (refer to Image 2) or through specific button combinations. The device can send commands such as L-ispazju, Daħħal, 1, 2, 3, jew 4, making it compatible with a wide range of switch-accessible software.

Modalità Tastiera: Sends predefined keyboard commands (e.g., Space, Enter, 1, 2, 3, 4).
Switch Interface Mode: Allows seamless switching between the integrated FeatherTouch switches and external wired switches connected to S1 and S2.

Refer to the full product documentation (accessible via the QR code on the bottom of the device) for detailed instructions on changing modes and configuring specific commands.

3. Adjusting Feedback

The Blue2 FT offers adjustable visual and auditory feedback. Use the 'Light' and 'Sound' switches on the bottom of the device (refer to Image 2) to enable or disable these feedback options according to user preference.

Manutenzjoni

The Blue2 FT is designed for durability. To ensure its longevity and proper function:

Tindif: Imsaħ l-apparat b'artab, damp drapp. Evita kimiċi ħarxa jew prodotti tat-tindif li joborxu.
Ħażna: Aħżen l-apparat f'post frisk u niexef meta ma jkunx qed jintuża.
Kura tal-batterija: Recharge the device regularly to maintain battery health. Avoid fully depleting the battery for extended periods.

Issolvi l-problemi

Apparat mhux mixgħul: Kun żgur li l-apparat huwa ċċarġjat. Qabbad ma' sors ta' enerġija billi tuża l-kejbil USB-C.
Not connecting via Bluetooth:
- Ensure the Blue2 FT is powered on and in pairing mode (if applicable, check full manual).
- Verify Bluetooth is enabled on your target device.
- Ipprova neħħi l-akkoppjar u erġa' qabbad l-apparat.
- Ensure the Blue2 FT is within range of the target device.
Switches not responding:
- Check the selected operating mode to ensure it matches your intended use.
- Verify that visual and auditory feedback are enabled if you rely on them for confirmation.
- If using external switches, ensure they are properly connected to the S1/S2 jacks.
Imġieba mhux mistennija: Try powering the device off and on again. If issues persist, consult the full online manual or contact AbleNet support.

Speċifikazzjonijiet

Isem tal-Mudell	AbleNet Blue2 FT
Numru tal-Mudell tal-Oġġett	10000033
Dimensjonijiet tal-Prodott	1.3 x 1.3 x 0.41 pulzieri
Piż tal-oġġett	13.4 uqija
Brand	ableNet
Manifattur	Ablenet
Teknoloġija tal-Konnettività	Bluetooth
Apparati Kompatibbli	Desktop, Laptop, PC, iPad, Mobile Devices
Materjal	Acrylonitrile Butadiene Styrene
Kulur	Blu, Oranġjo
Karatteristika Speċjali	Ergonomic, FeatherTouch Activation
Komponenti Inklużi	Ħardwer tal-immuntar

Garanzija u Appoġġ

AbleNet is committed to providing reliable assistive technology solutions. The Blue2 FT is designed to meet stringent medical device regulations (MDR, UKCA, MedDo) and undergoes durability testing as part of the ableSTRONG program.

ableCARE Program

Stampa 5: AbleNet ableCARE logo.

The ableCARE program offers product support and guidance to assist users and professionals in implementing AbleNet assistive technology effectively. The ableCARE Product Success team is available to provide knowledge and build confidence in using your device.

ableSAFE and ableSTRONG

Stampa 6: AbleNet ableSAFE logo.

Stampa 7: AbleNet ableSTRONG logo.

ableSAFE products are tested by certified third-party laboratories to meet or exceed global safety standards, ensuring the device is engineered with safety in mind.

ableSTRONG products undergo durability tests to withstand drops, moisture, and dirt, ensuring continued performance in various environmental factors.

Informazzjoni ta' Kuntatt

For further assistance or warranty inquiries, please contact AbleNet directly:

AbleNet, Inc.
2625 Triq Patton
Roseville, MN 55113
Istati Uniti tal-Amerika
Websit: www.ablenetinc.com

You can also scan the QR code on the bottom of your device for direct access to instructions and support resources.

	Gwida ta' Bidu Mgħaġġel għas-Swiċċ tal-Aċċessibilità Wireless AbleNet Blue2 FT Gwida konċiża dwar kif twaqqaf u tuża s-swiċċ tal-aċċessibbiltà mingħajr fili AbleNet Blue2 FT ma' apparati Apple, li tkopri t-tqabbil, il-konfigurazzjoni, u t-trażmissjoni tal-apparat.view.
	Gwida ta' Bidu Mgħaġġel tar-4 Ġenerazzjoni ta' AbleNet Blue2 - Interfaċċja tas-Swiċċ tal-Aċċessibilità Ibda malajr bl-AbleNet Blue2 tar-4 Ġenerazzjoni, interface versatili ta' swiċċ Bluetooth. Din il-gwida tkopri s-setup għall-iPad, iPhone, macOS, Windows, Chrome, l-iċċarġjar, il-modi ta' programmar, u s-soluzzjoni tal-problemi.
	Gwida ta' Bidu Mgħaġġel ta' AbleNet SuperTalker FT Gwida ta' bidu rapidu għall-apparat tad-diskors AbleNet SuperTalker FT, li tkopri r-reġistrazzjoni tal-prodott, is-setup, it-trażmissjoni tal-apparatview, u l-app ableCARE.
	Aċċessibilità tal-iOS 13 u l-iPadOS 13: Gwida għall-Utent tal-Kontroll tas-Swiċċ A comprehensive user guide for configuring Apple's Switch Control feature on iOS 13 and iPadOS 13, with detailed instructions for using AbleNet's Blue2 Bluetooth Switch and Hook+ iOS Switch Interface. It covers various scanning methods, settings, and developer resources for enhanced accessibility.
	Simplifikazzjoni tal-Aċċess għas-Swiċċijiet b'Riċetti tal-Kontroll tas-Swiċċijiet A guide to simplifying switch access on iPad, iPhone, and iPod touch using Switch Control Recipes. This document provides tutorials for turning eBook pages, controlling music playback, and creating cause-and-effect activities with Garage Band.
	Gwida ta' Bidu Mgħaġġel tal-Pjanċa tal-Immuntar AbleNet Quick Ready għat-Teknoloġija Assistiva This guide provides essential steps for setting up and using the AbleNet Quick Ready Mounting Plate, designed for mounting assistive technology devices. It covers product registration, installation instructions, and an overview of the plate's components and compatibility.

AbleNet 10000033