Kohler K-97100-4-CP

Kohler Taut K-97100-4-CP Widespread Bathroom Sink Faucet Instruction Manual

Model: K-97100-4-CP | Brand: Kohler

1. Prodott Aktarview

The KOHLER Taut widespread faucet, model K-97100-4-CP, is designed for bathroom sink installations, offering a minimalist aesthetic suitable for transitional or contemporary environments. This faucet features a 1.2 gallons per minute (gpm) flow rate and is finished in Polished Chrome. It is equipped with UltraGlide valves for easy installation and leak-free performance.

Kohler Taut Widespread Bathroom Sink Faucet in Polished Chrome
Figure 1.1: Kohler Taut Widespread Bathroom Sink Faucet (Polished Chrome)

The faucet's design emphasizes clean lines and robust construction, ensuring both visual appeal and reliable functionality. It is part of the Taut collection, designed to coordinate with other KOHLER showering components.

2. Kontenut tal-Pakkett

Before beginning installation, verify that all components are present in the package. The standard package for the Kohler Taut K-97100-4-CP faucet typically includes the following:

  • Fully assembled faucet spout
  • Żewġ manki tal-lieva
  • Pop-up drain assembly with lift rod
  • Preassembled supply lines
  • Mounting hardware and gaskets
  • Istruzzjonijiet għall-installazzjoni
Diagram showing faucet components: faucet, pop-up drain and lift rod, and supply lines
Figure 2.1: What's in the Box - Faucet, Pop-Up Drain and Lift Rod, Supply Lines

3. Setup u Installazzjoni

The Kohler Taut faucet is designed for straightforward installation, often preassembled to simplify the process. It is a widespread faucet, requiring three holes for mounting: one for the spout and one for each handle. Ensure your sink or countertop has the appropriate 8-inch spacing for a widespread installation.

3.1 Għodda u Materjali Meħtieġa (Mhux Inklużi)

  • Wrench aġġustabbli
  • Stokk tal-plamer jew siġillant tas-silikon
  • Tornavit Phillips
  • Basin wrench (mhux obbligatorju, għal spazji stretti)
  • Nuċċalijiet tas-sigurtà

3.2 Passi ta' Installazzjoni

  1. Ipprepara l-Wiċċ tal-Immuntar: Ensure the sink or countertop surface is clean and dry.
  2. Install Faucet Handles: Insert the handle assemblies into the outer holes. Secure them from underneath the counter using the provided washers and nuts.
  3. Install Faucet Spout: Place the spout assembly into the center hole. Apply plumber's putty or silicone sealant around the base of the spout if recommended by local codes or the specific installation guide. Secure the spout from underneath with its washer and nut.
  4. Qabbad il-Linji tal-Provvista: Attach the preassembled supply lines from the faucet to your hot and cold water supply valves. Hand-tighten first, then use an adjustable wrench for a final quarter-turn. Do not overtighten.
  5. Installa l-Assemblea tad-Drenaġġ: Follow the specific instructions for installing the pop-up drain. Ensure a watertight seal with plumber's putty or silicone sealant around the drain flange. Connect the lift rod to the drain mechanism.
  6. Test għal Tnixxijiet: Turn on the water supply and check all connections for leaks. Operate the faucet handles and drain stopper to ensure proper function.
Diagram showing faucet dimensions including faucet height, spout reach, and handle range
Figure 3.1: Faucet Dimensions for Installation Planning

4. Istruzzjonijiet Operattivi

The Kohler Taut widespread faucet is designed for intuitive operation with its lever handles and integrated pop-up drain.

4.1 Kontroll tal-Fluss tal-Ilma u t-Temperatura

  • Tixgħel/Jitfi: Rotate the left handle counter-clockwise for hot water and the right handle counter-clockwise for cold water. Rotate clockwise to turn off.
  • Aġġustament tal-Fluss: The further the handle is rotated, the greater the water flow.
  • Aġġusta tat-Temperatura: Ħallat ilma sħun u kiesaħ billi taġġusta ż-żewġ manki simultanjament biex tikseb it-temperatura mixtieqa.
Kohler Taut faucet with water running, demonstrating performance
Figure 4.1: Faucet in Operation, showing water flow

4.2 Drain Stopper Operation

The faucet includes a pop-up drain with a lift rod located behind the spout. To operate the drain:

  • Close Drain: Push the lift rod down to close the drain and fill the sink.
  • Open Drain: Pull the lift rod up to open the drain and allow water to flow out.

5. Manutenzjoni u Kura

Proper care and maintenance will ensure the longevity and appearance of your Kohler Taut faucet.

5.1 Istruzzjonijiet għat-Tindif

  • Naddaf il-vit regolarment b'ċarruta ratba, damp drapp u sapun ħafif.
  • Laħlaħ sewwa bl-ilma wara t-tindif.
  • Nixxef il-vit b'ċarruta ratba biex tevita tbajja' tal-ilma.

5.2 Avoid Harsh Cleaners

Do not use abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the Polished Chrome finish. Products containing ammonia, bleach, or alcohol should also be avoided.

Diagram illustrating Kohler's Vibrant Finishes with ScratchShield Technology, showing three layers of metal coating
Figure 5.1: Vibrant Finishes with ScratchShield Technology for durability

5.3 Valve Maintenance

The faucet is equipped with UltraGlide valves designed for leak-free performance. In case of reduced flow or persistent drips, the valve cartridges may need inspection or replacement. Consult a qualified plumber or Kohler customer service for assistance.

Close-up image of an UltraGlide valve component
Figure 5.2: UltraGlide Valve, designed to prevent leaks

6 Issolvi l-problemi

This section addresses common issues you might encounter with your Kohler Taut faucet.

ProblemaKawża PossibbliSoluzzjoni
Flow Ilma BaxxClogged aerator; partially closed supply valve; debris in supply lines.Remove and clean the aerator. Ensure supply valves are fully open. Flush supply lines.
Tnixxija mill-bokkaWorn valve cartridge; debris in cartridge.Replace valve cartridge. Clean debris from cartridge.
Tnixxija fil-Bażi tal-FaucetLoose mounting nuts; worn gaskets.Tighten mounting nuts. Replace gaskets.
Stiff HandlesAkkumulazzjoni ta' minerali fil-kartuċċa; kartuċċa milbusa.Clean or replace valve cartridges.
Drain Stopper Not SealingImproperly adjusted lift rod; debris in drain.Adjust lift rod connection. Clear drain of debris.

If you are unable to resolve an issue using the troubleshooting steps above, it is recommended to contact Kohler customer service or a qualified plumbing professional.

7. Speċifikazzjonijiet

Detailed specifications for the Kohler Taut K-97100-4-CP Widespread Bathroom Sink Faucet:

KaratteristikaDettall
BrandKohler
Isem tal-MudellTaut
Numru tal-MudellK-97100-4-CP
Tip FinishChrome illustrat
MaterjalMetal (Handle Material: Ceramic)
Tip ta 'ImmuntarDeck Mounted, Widespread
Numru ta 'Mankijiet2 (Lever Handles)
Għadd ta' toqob3
Rata tal-Fluss1.2 Galloni Fil-Minuta
Tip ta' ValvCartridge Valve (UltraGlide)
B'ħeġġeġ Għoli4 Pulzier
Piż tal-oġġett6 Liri
UPC885612710277
Karatteristika SpeċjaliFaċli biex tinstalla

8. Informazzjoni dwar Garanzija

The Kohler Taut K-97100-4-CP Widespread Bathroom Sink Faucet is covered by the KOHLER Faucet Garanzija Limitata għall-Ħajja. This warranty typically covers defects in material and workmanship for as long as the original consumer/purchaser owns their home. For complete details regarding terms, conditions, and limitations of the warranty, please refer to the official Kohler website or contact Kohler customer service directly.

Kohler Lifetime Limited Warranty badge displayed with various faucet finishes
Figure 8.1: Kohler Lifetime Limited Warranty

9. Appoġġ għall-Klijent

For further assistance, technical support, or warranty claims, please contact Kohler customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your model number (K-97100-4-CP) and purchase date available.

You can visit the official Kohler websit għal riżorsi addizzjonali, FAQs, u reġistrazzjoni tal-prodott: www.kohler.com

Dokumenti Relatati - K-97100-4-CP

Preview Folja ta' Speċifikazzjoni tat-Trim tal-Valv KOHLER Coralais Rite-Temp K-TS15621-4
Speċifikazzjonijiet dettaljati għat-Trim tal-Valv KOHLER Coralais Rite-Temp (Mudell K-TS15621-4). Dan id-dokument jiddeskrivi l-karatteristiċi, il-materjal, ir-rekwiżiti tal-installazzjoni, l-aċċessorji kompatibbli, il-kodiċijiet/standards, l-informazzjoni dwar il-garanzija, u l-irfinar disponibbli għal dan it-trim tal-faucet.
Preview Faucet tal-Kċina KOHLER Artifacts® bil-KOHLER® Konnect™ K-29709-WB - Karatteristiċi, Speċifikazzjonijiet, u Installazzjoni
Esplora l-faucet tas-sink tal-kċina KOHLER Artifacts® K-29709-WB, li jinkludi attivazzjoni mingħajr kuntatt, teknoloġija intelliġenti KOHLER® Konnect™, tliet funzjonijiet ta' sprej, u kostruzzjoni tal-metall ta' kwalità għolja. Jinkludi speċifikazzjonijiet, dettalji tal-installazzjoni, u finituri disponibbli.
Preview Folja ta' Speċifikazzjoni tat-Trim tal-Valv KOHLER Devonshire Rite-Temp K-TS397-4
Folja ta' speċifikazzjoni dettaljata għall-KOHLER Devonshire Rite-Temp Valve Trim (K-TS397-4), li tiddeskrivi l-karatteristiċi, il-materjali, ir-rekwiżiti tal-installazzjoni, il-kodiċijiet, il-finituri disponibbli, u d-dimensjonijiet tekniċi tiegħu. Tinkludi informazzjoni dwar il-konformità u l-garanzija tal-ADA.
Preview Xkaffa tax-Xugamani Kohler Purist K-14381: Speċifikazzjonijiet, Karatteristiċi, u Finituri
Speċifikazzjonijiet dettaljati, karatteristiċi, dimensjonijiet, finituri disponibbli, u informazzjoni dwar il-garanzija għall-Kohler Purist K-14381 Xugamani Shelf. Jinkludi noti dwar l-installazzjoni u tagħrif dwar il-prodott.view.
Preview Speċifikazzjonijiet tas-Sink tal-Kamra tal-Banju Kohler Ladena K-2214-G Undermount
Speċifikazzjonijiet dettaljati għas-sink tal-kamra tal-banju taħt il-wiċċ Kohler Ladena K-2214-G, inklużi l-karatteristiċi, id-dimensjonijiet, il-finituri disponibbli, in-noti tal-installazzjoni, u l-konformità mal-istandards ADA, CSA B651, ASME, EPA WaterSense, u ICC/ANSI. Tinkludi informazzjoni dwar il-garanzija minn Kohler.
Preview Kohler Single-Control Kitchen Sink Faucet Installation and Care Guide
Comprehensive installation and care guide for the Kohler Single-Control Kitchen Sink Faucet (models K-15171, K-15172, K-15173, K-15175, K-15176). Includes step-by-step instructions, tools required, cleaning advice, and warranty information.