Manwal tal-Istruzzjonijiet Uffiċjali tal-Qafas tar-Ritratti ta' Disney Frozen 2

Introduzzjoni

This manual provides instructions for the proper setup, use, and care of your Disney Official Frozen 2 Photo Frame. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

Informazzjoni dwar is-Sigurtà

• Handle with care: The frame includes a glass cover. Avoid dropping or striking the frame to prevent breakage and potential injury.
• Keep out of reach of small children: Small components or broken glass could pose a choking or cutting hazard.
• Placement: Ensure the frame is placed on a stable, flat surface to prevent it from falling.
• Cleaning: Use only recommended cleaning methods to avoid damaging the frame's finish or the glass.

Kontenut tal-Pakkett

• 1 x Disney Official Frozen 2 Photo Frame

Setup

1. Prepare Your Photo: Select a photo measuring 6" x 4" (10cm x 15cm) for optimal fit.
2. Access the Photo Opening:
   

   Immaġni: Wara view of the photo frame, showing the easel stand and the back panel secured by swivel clips.
   Carefully turn the frame over to access the back panel. Locate the swivel clips or tabs that hold the back panel in place. Rotate these clips to release the panel.
3. Insert the Photo: Remove the back panel and any protective inserts. Position your 6" x 4" photo into the frame opening, ensuring it is centered and facing forward.
4. Secure the Photo: Place the back panel back into position, ensuring it sits flush within the frame. Rotate the swivel clips or tabs back into their locked position to secure the photo and back panel.
5. Pożizzjona l-Qafas:
   

   Immaġni: Quddiem view of the Disney Frozen 2 Photo Frame, featuring Anna and Elsa on the left and a photo opening on the right.

   Extend the easel stand on the back of the frame. Place the frame on a flat, stable surface such as a desk, shelf, or table. Ensure the stand is fully extended for maximum stability.

Operazzjoni

The Disney Official Frozen 2 Photo Frame is designed for displaying a single 6" x 4" (10cm x 15cm) photograph. Once your photo is inserted and the frame is positioned, no further operation is required. The frame is intended for decorative display.

Manutenzjoni

• Tindif tal-qafas: Use a soft, dry cloth to gently wipe the frame's surface. Avoid abrasive cleaners or solvents, as these can damage the finish.
• Tindif tal-ħġieġ: For the glass cover, use a glass cleaner sprayed onto a soft cloth (not directly onto the glass) and wipe gently. Ensure no liquid seeps into the frame edges.
• It-tfarfir: Regularly dust the frame and glass to maintain clarity and appearance.
• Ħażna: If storing the frame, ensure it is protected from dust, moisture, and extreme temperatures.

Issolvi l-problemi

• Photo Does Not Fit: Ensure your photo is exactly 6" x 4" (10cm x 15cm). Larger photos will need to be trimmed.
• Frame is Unstable: Check that the easel stand on the back is fully extended and the frame is placed on a flat, level surface.
• Glass Appears Dirty After Cleaning: Ensure you are using a lint-free cloth and a streak-free glass cleaner. Wipe in one direction.

Speċifikazzjonijiet

Garanzija u Appoġġ

This product is designed for decorative use. For any questions or support regarding this product, please refer to the retailer where it was purchased. Specific warranty information may be available from the point of purchase.