1. Informazzjoni dwar is-Sigurtà
Please read all instructions carefully before using the BLS T401 LED Motion Sensor Closet Light. Retain this manual for future reference.
- Tesponix l-apparat għal temperaturi estremi jew dawl tax-xemx dirett.
- Żomm l-apparat 'il bogħod mill-ilma u umdità għolja.
- Tippruvax tiżżarma jew timmodifika l-apparat. Dan jista' jannulla l-garanzija u joħloq riskju għas-sigurtà.
- Uża biss il-kejbil tal-iċċarġjar provdut jew kejbil USB-C iċċertifikat għall-iċċarġjar.
- Ensure the installation surface is clean and dry before attaching the light using adhesive methods.
2. Prodott Aktarview
The BLS T401 LED Motion Sensor Closet Light is a versatile, rechargeable lighting solution designed for various indoor applications. It features a motion sensor for automatic illumination and a long-lasting battery.
Figure 2.1: The BLS T401 LED Motion Sensor Closet Light, a sleek silver bar with a central motion sensor and light strip.
Karatteristiċi ewlenin:
- Illuminazzjoni Super Bright: 200 lumens with 6000K Clean White Glow.
- Installazzjoni bla fili: No hard wiring required.
- Sensor tal-Moviment: Automatically turns on when motion is detected in dark or low-light conditions.
- Batterija rikarikabbli: Built-in 4500mAh UL certified battery for extended use.
- Għażliet multipli ta 'Immuntar: Magnetic attachment, 3M adhesive tape, or screws.
- 3-Mode Switch: OFF, ON, and AUTO modes for flexible operation.
Figure 2.2: Diagram illustrating the dimensions of the BLS T401 light (15.1 inches long, 0.9 inches wide, 0.98 inches high) and its 120-degree motion detection range up to 10 feet.
3. Setup
The BLS T401 offers flexible installation options to suit various surfaces.
Metodi ta 'installazzjoni:
- Twaħħil manjetiku: The light has built-in strong magnets. It can be directly attached to any iron surface without additional mounting hardware.
- Tejp li jwaħħal: For non-magnetic surfaces, use the included 3M adhesive tape. Clean the desired surface thoroughly, peel off the protective film from the adhesive pads, attach them to the metal mounting brackets, and then firmly press the brackets onto the surface. Once the brackets are secure, the light can be magnetically attached to them.
- Immuntar bil-kamin: For a more permanent installation, use the included screws. Mark the positions for the screws through the holes on the metal mounting brackets. Drill pilot holes if necessary, then secure the brackets with screws. Finally, attach the light magnetically to the installed brackets.
Figure 3.1: Step-by-step guide for installing the light using adhesive tape and magnetic brackets, including an example of magnetic attachment to a refrigerator and under-cabinet placement.
4. Istruzzjonijiet Operattivi
The BLS T401 features a sliding switch with three modes: OFF, ON, and AUTO.
Għażla tal-Modalità:
- MITFI: The light remains off regardless of motion or ambient light.
- FUQ: The light stays continuously on.
- AUTO: In this mode, the motion sensor activates the light. The light will turn on when it senses motion in both dark and low-light environments. It stays on as long as motion is detected nearby and automatically turns off 18 seconds after motion ceases. A built-in light sensor ensures the light stays off when the ambient environment is bright to conserve battery.
Aġġustament tas-Sensor tal-Moviment:
The sensitivity of the motion sensor can be adjusted by rotating the light on its magnetic base. Adjust the angle to achieve optimal lighting and motion detection for your specific environment.
Video 4.1: An official BLS LED video demonstrating the light's features, including its battery and motion sensor functionality.
5. Iċċarġjar
The BLS T401 is equipped with a 4500mAh rechargeable lithium-ion battery.
Proċess tal-Iċċarġjar:
- Locate the USB-C charging port on one end of the light.
- Connect the provided USB-C charging cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port).
- The charging indicator light will illuminate to show the charging status. Refer to the indicator light guide for specific details (usually red for charging, green for fully charged).
- A full charge can last up to 180 days in AUTO mode, based on 10 activations per day, 20 seconds each time.
Figure 5.1: Visual comparison highlighting the BLS T401's 180-day run time with its large 4500mAh rechargeable battery versus other lights with smaller batteries requiring frequent charging.
6. Manutenzjoni
To ensure optimal performance and longevity of your BLS T401 LED Motion Sensor Closet Light, follow these maintenance guidelines:
- Tindif: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
- Kura tal-batterija: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
- Ħażna: If storing the light for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.
7 Issolvi l-problemi
If you encounter any issues with your BLS T401, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx fil-modalità AUTO. | Insufficient ambient light (too bright), no motion detected, or low battery. | Ensure the environment is dark enough for AUTO mode. Check for motion within the sensor's range. Recharge the battery. |
| Light turns off too quickly or stays on too long. | Motion sensor sensitivity or placement. | Adjust the angle of the light on its magnetic base to optimize sensor detection. Ensure no constant motion is within range if it stays on too long. |
| Id-dawl huwa baxx jew jitteptep. | Batterija baxxa. | Iċċarġja l-batterija kompletament. |
| Id-dawl ma jiċċarġjax. | Kejbil tal-iċċarġjar jew sors tal-enerġija difettuż. | Ipprova kejbil USB-C differenti u/jew sors ta' enerġija USB differenti. |
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | BLS |
| Numru tal-Mudell | T401 |
| Tip ta' Sors tad-Dawl | LED |
| Luminożità | 200 Lumens |
| Temperatura tal-Kulur | 6000 Kelvin (Clean White) |
| Kapaċità tal-batterija | 4500mAh Lithium Ion (UL Certified) |
| Sors tal-Enerġija | Mħaddma bil-batterija |
| Dimensjonijiet tal-Prodott | 15.1"T x 0.9"W x 0.98"Għ |
| Piż tal-oġġett | 8 uqija |
| Materjal | Acrylonitrile Butadiene Styrene, Aluminju |
| Metodu ta' Kontroll | Slide Switch (OFF/ON/AUTO) |
| Medda tas-Sensor tal-Moviment | Up to 10 feet, 120° detection angle |
| Tip ta' Installazzjoni | Magnetic, Adhesive, Screw Mount |
| Użu fuq ġewwa/barra | Ġewwa |
9. Garanzija u Appoġġ
BLS joffri a One Year Warranty & Lifelong Service for this product. Should you encounter any issues or have questions regarding your BLS T401 LED Motion Sensor Closet Light, please contact customer service via email at cuscare.blscollection@gmail.com. Please provide your order ID for efficient support. The manufacturer is committed to providing worry-free service.
