1. Introduzzjoni
Thank you for choosing the Steinel L 810 SC Outdoor LED Wall Light. This high-quality luminaire combines modern design with advanced technology, featuring an invisible high-frequency motion sensor and Bluetooth connectivity for convenient control via the Steinel Smart Remote app. This manual provides essential information for safe installation, operation, and maintenance of your new light.
2. Istruzzjonijiet tas-Sigurtà
- Installazzjoni Elettrika: Installation must be carried out by a qualified electrician in accordance with national wiring regulations and local electrical codes.
- Skonnettjar tal-Enerġija: Always disconnect the power supply before performing any work on the light fixture.
- Voltage: Tiżgura l-provvista voltage matches the requirements specified on the product label (220-240V).
- Wiċċ tal-Immuntar: Mount the light on a stable, flat surface suitable for its weight.
- Klassi ta' Protezzjoni: This product is rated IP44, suitable for outdoor use and protected against splashing water. Do not submerge.
- LEDs: Tħarisx direttament fis-sors tad-dawl LED.
3. Kontenut tal-Pakkett
Carefully unpack the product and check that all components are present and undamaged. If any parts are missing or damaged, contact your retailer.
Stampa 3.1: Contents of the Steinel L 810 SC package, showing the LED wall light, mounting screws, wall plugs, and a quick start guide.
- Steinel L 810 SC LED Wall Light
- Parentesi ta 'montatura
- Viti tal-immuntar u plugs tal-ħajt
- Gwida tal-bidu ta 'malajr
4. Prodott Aktarview
The Steinel L 810 SC is an elegant outdoor LED wall light designed for up/down illumination. It integrates a high-frequency motion sensor discreetly within its housing, offering a clean aesthetic. The light can be controlled and configured via Bluetooth using the Steinel Smart Remote app.
Stampa 4.1: Quddiem view of the Steinel L 810 SC LED Wall Light.
Stampa 4.2: Key features and specifications of the L 810 SC, including LED technology, 160° high-frequency sensor, detection range, Bluetooth Mesh, color temperature, light level, time setting, and soft light start.
5. Installazzjoni (Setup)
Segwi dawn il-passi għal installazzjoni sikura u korretta:
- Ipprepara s-sit tal-installazzjoni: Choose a suitable location on an exterior wall. Ensure the power supply is turned off at the main circuit breaker.
- Immarka l-Punti tat-Tħaffir: Hold the mounting bracket against the wall at the desired installation height and mark the drilling points.
- Drill toqob: Aqta’ toqob fil-punti mmarkati u daħħal it-tappijiet tal-ħajt.
- Immonta l-Bracket: Waħħal il-bracket tal-immuntar mal-ħajt billi tuża l-viti pprovduti.
- Qabbad il-Wiring: Connect the mains power supply cables to the terminal block on the light fixture. Ensure correct polarity (Live, Neutral, Earth).
- Attach the Luminaire: Carefully attach the light fixture to the mounting bracket, ensuring it is securely fastened.
- Irrestawra l-Enerġija: Turn the power supply back on at the main circuit breaker. The light will perform a brief self-test.
6. Operazzjoni
The Steinel L 810 SC can be operated and configured via the Steinel Smart Remote app.
6.1 Initial Setup and Bluetooth Connection
- Niżżel l-App: Download the free Steinel Smart Remote app from the Google Play Store or Apple App Store.
- Ibda l-App: Open the app on your smartphone or tablet.
- Qabbad mad-Dawl: The app will search for nearby Steinel Bluetooth-enabled devices. Select your L 810 SC from the list to connect.
- Ikkonfigura Settings: Once connected, you can adjust various settings.
6.2 Karatteristiċi ta' Kontroll tal-App
The app allows for comprehensive customization of your light's behavior:
Stampa 6.1: Screenshot of the Steinel Smart Remote app interface for configuring the L 810 SC.
- Żona ta' sejbien: Digitally adjust the 160° high-frequency motion sensor's detection range up to 5 meters.
- L-issettjar tal-ħin: Set the light duration from 5 seconds to 60 minutes after motion detection.
- Twilight Setting: Adjust the ambient light level (2-2000 lux) at which the sensor becomes active.
- Basic Light Function: Configure a continuous low-level light (10-100% dimmable) that activates at dusk and brightens to full intensity upon motion detection.
- Permanent Light: Activate a 4-hour permanent light function via the app.
- Soft Light Start: The light gradually increases to full brightness, enhancing comfort and extending LED lifespan.
- Raggruppament: Connect multiple Steinel Bluetooth lights to create groups and control them simultaneously.
Stampa 6.2: Illustration of the motion detection principle using high-frequency technology.
7. Manutenzjoni
The Steinel L 810 SC requires minimal maintenance.
- Tindif: Clean the light fixture regularly with a soft, damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu, għax dawn jistgħu jagħmlu ħsara lill-wiċċ.
- Sostituzzjoni LED: The LEDs are integrated and not user-replaceable. The product has a long average lifespan of 50,000 hours.
- Spezzjoni: Periodically check the mounting screws for tightness and the cable for any signs of wear or damage.
8 Issolvi l-problemi
If you encounter issues with your Steinel L 810 SC, refer to the following table:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | No power supply; incorrect wiring; twilight setting too high; sensor faulty. | Check circuit breaker; verify wiring connections; adjust twilight setting in app; contact support if sensor is suspected faulty. |
| Id-dawl jibqa' mixgħul kontinwament. | Permanent light activated; continuous motion in detection area; wiring error. | Deactivate permanent light in app; check detection area for constant movement; verify wiring. |
| Sensor does not detect motion. | Detection range too small; sensor obstructed; sensitivity too low. | Increase detection range in app; remove obstructions; increase sensor sensitivity in app. |
| Kwistjonijiet ta 'konnessjoni Bluetooth. | Barra mill-firxa; l-app mhux aġġornata; interferenza. | Move closer to the light; update the Steinel Smart Remote app; restart phone and light. |
9. Speċifikazzjonijiet
Technical data for the Steinel L 810 SC LED Wall Light:
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | 065706 |
| Dimensjonijiet (L x W x H) | 23 x 14.5 x 9.1 ċm |
| Piż | 920 g |
| Provvista tal-Enerġija | 220-240 V, 50/60 Hz |
| Konsum tal-Enerġija | 9.8 W |
| Fluss Luminuż | 679 lm |
| Temperatura tal-Kulur | 3000 K (abjad sħun) |
| Indiċi tar-Rendiment tal-Kulur (CRI) | 80 |
| Medja tal-Ħajja | 50,000 sigħat |
| Tip tas-Sensor tal-Moviment | High-frequency (iHF) |
| Angolu ta 'skoperta | 160° |
| Firxa ta 'Sejbien | Up to 5 m (adjustable) |
| Twilight Setting | 2-2000 lux (aġġustabbli) |
| L-issettjar tal-ħin | 5 sec - 60 min (adjustable) |
| Klassi ta' Protezzjoni | IP44 |
| Materjal | Aluminju, Plastik |
Stampa 9.1: Dimensional drawing of the L 810 SC (measurements in mm).
10. Garanzija u Appoġġ
Steinel products are manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Steinel website. For technical support, spare parts, or service inquiries, please contact your retailer or the Steinel customer service department.
You can find more information and support resources on the official Steinel websit: www.steinel.de
