1. Introduzzjoni
This user manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell Power X-Change TE-SM 36/210 Li Cordless Miter Saw. As part of the Power X-Change series, this saw offers unparalleled flexibility and freedom from cords, making it ideal for various woodworking tasks, including miter and cross cuts, and even cutting parquet flooring to length.
Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its performance and lifespan.
Figure 1: The Einhell TE-SM 36/210 Li Cordless Miter Saw, a versatile tool for precise cuts.
2. Istruzzjonijiet tas-Sigurtà
Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury or damage to the tool.
- Ilbes Tagħmir Protettiv Personali (PPE): Dejjem ilbes nuċċalijiet tas-sigurtà, protezzjoni għas-smigħ, u maskra tat-trab.
- Biċċa tax-Xogħol Sikura: Uża l-clamping device to firmly hold the workpiece in place before cutting.
- Żomm Żona tax-Xogħol Nadif: Keep the work area free of clutter and well-lit.
- Iċċekkja x-Xafra: Ensure the saw blade is sharp, clean, and correctly installed before each use.
- Evita li tlaħħaq iżżejjed: Żomm livell tajjeb u bilanċ f'kull ħin.
- Skonnettja l-Enerġija: Dejjem neħħi l-pakkett tal-batterija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda.
- Ġestjoni tat-Trab: Utilize the dust bag or connect to a dust extractor to minimize airborne dust.
3. Setup
3.1 Installazzjoni tal-batterija
The TE-SM 36/210 Li operates on the Einhell Power X-Change system, requiring two 18V batteries (36V total) for optimal performance. It is recommended to use at least two 2.5 Ah PXC Plus rechargeable batteries.
- Ensure the saw is switched off.
- Align the battery packs with the battery slots on the saw.
- Slide the battery packs into the slots until they click securely into place.
- Biex tneħħihom, agħfas il-buttuna tar-rilaxx fuq kull batterija u żżerżaqhom 'il barra.
Figure 2: Proper installation of the Power X-Change batteries into the saw.
3.2 X-Tend Table Extension
The saw features X-Tend supports that can be adjusted with one hand and without tools, providing stable support for wider workpieces.
- Locate the X-Tend supports on either side of the main table.
- Pull the supports outwards to extend them to the desired length.
- Ensure the workpiece is fully supported across the extended table for stability and accurate cuts.
Figure 3: Extending the X-Tend table for supporting longer workpieces.
3.3 Ġbir tat-Trab
The saw comes with a sawdust bag and an adapter for connecting an external dust extractor, helping to keep your workspace clean.
- Attach the provided sawdust bag to the dust port at the rear of the saw.
- For more efficient dust extraction, connect a compatible dust extractor hose to the adapter.
4. Istruzzjonijiet Operattivi
4.1 Tixgħel/Jitfi
To start the saw, press the main power switch. Release the switch to turn off the saw.
4.2 Using LED Light and Laser Line
The integrated LED light and laser line ensure precise cuts, even in challenging lighting conditions.
- Locate the LED and Laser switches on the saw's handle.
- Press the respective buttons to activate the LED light for illumination and the laser line for guiding your cut.
Figure 4: The laser line provides a clear guide for accurate cutting.
4.3 Adjusting Angle Cuts (Miter)
The turntable allows for precise angle adjustments for miter cuts, ranging from -47° to +47°.
- Loosen the locking mechanism for the turntable.
- Rotate the turntable to the desired angle, indicated by the scale.
- Securely tighten the locking mechanism before making a cut.
Figure 5: The turntable allows for precise angle adjustments for miter cuts.
4.4 Adjusting Bevel Cuts
The saw head can be tilted up to 45° to the left for bevel cuts.
- Ħoll il-pum tal-aġġustament tal-inklinazzjoni.
- Mejjel ir-ras tas-serrieq għall-angolu mixtieq.
- Tighten the knob to lock the head in position.
4.5 Sliding Function
The smooth-running drag function is suitable for wider workpieces, allowing the saw head to slide forward and backward during the cut.
- Kun żgur li l-biċċa tax-xogħol tkun clamped.
- Lower the saw blade slightly into the workpiece.
- Push the saw head forward through the material, then pull it back to complete the cut.
4.6 Kapaċità tat-Tqattigħ
The cutting capacity varies based on the battery capacity and the material being cut. The Power X-Change system allows for different battery sizes to be used, affecting the number of cuts per charge.
Figure 6: Approximate cutting capacity for laminated wood (195 x 8 mm) per battery charge.
Figure 7: Approximate cutting capacity for square wood (60 x 60 mm) per battery charge.
For optimal results, it is recommended to use higher capacity Power X-Change batteries.
4.7 Video tal-Prodott
Watch the official product video for a visual guide on the features and operation of the Einhell TE-SM 36/210 Li Cordless Miter Saw.
Video: Demonstrating the features and use of the Einhell TE-SM 36/210 Li Miter Saw, including battery installation, X-Tend table, laser guide, and various cuts.
5. Manutenzjoni
Manutenzjoni regolari tiżgura l-lonġevità u l-prestazzjoni ottimali tas-serrieq tal-mitra tiegħek.
- Tindif: After each use, clean the saw thoroughly, especially around the blade area and dust port, to prevent sawdust buildup. Use a brush or compressed air.
- Sostituzzjoni tax-xafra: Replace worn or damaged saw blades promptly. Always use a blade compatible with the saw's specifications and intended material. Refer to the blade replacement instructions in the full manual for detailed steps.
- Lubrikazzjoni: Periodically lubricate moving parts as recommended in the comprehensive manual to ensure smooth operation of the sliding mechanism and angle adjustments.
- Ħażna: Aħżen is-serrieq f'post niexef u sigur, fejn ma jintlaħaqx mit-tfal.
6 Issolvi l-problemi
Din it-taqsima tindirizza kwistjonijiet komuni li tista' tiltaqa' magħhom bis-serrieq tal-mitra tiegħek.
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Saw ma jibda. | Batteriji mhux installati sew jew skarikati. | Kun żgur li l-batteriji huma ċċarġjati kompletament u mdaħħla sew. |
| Cuts are not straight or precise. | Dull blade, incorrect angle setting, or workpiece not secure. | Replace blade, re-check angle settings, and ensure workpiece is clamped bis-sod. |
| Trab eċċessiv waqt it-tħaddim. | Dust bag full or not properly attached; dust extractor not connected or clogged. | Empty dust bag, check connections, or clear any blockages in the dust extraction system. |
| Saw motor overheats. | Overloading the saw, continuous heavy use. | Allow the saw to cool down. Avoid forcing the blade through material. |
If you encounter issues not listed here, please refer to the complete product manual or contact Einhell customer support.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | TE-SM 36/210 Li (4300880) |
| Voltage | 36 Volts (2x 18V Power X-Change) |
| Qawwa | 144 Watts |
| Veloċità | 1900 rpm |
| Tul tax-xafra | 30 Ċentimetru |
| Dimensjonijiet tal-Prodott (L x W x H) | 78.2 x 53 x 49 ċm |
| Piż | 12.57 Kilogrammi |
| Karatteristiċi Speċjali | Brushless motor, LED light, Laser line, X-Tend table supports |
| Komponenti Inklużi | Cordless sliding miter saw, precision carbide-tipped saw blade |
| Batteriji Meħtieġa | Yes (2x 18V Power X-Change, not included for main power; 2x LR44 for laser/LED) |
| Materjal tax-xafra | Karbur |
| Wiċċ Rakkomandat | Injam |
8. Garanzija u Appoġġ
For warranty information, please refer to the documentation provided with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly.
Spare parts availability: Information unavailable.
Tista' ssib aktar informazzjoni u dettalji ta' kuntatt fuq is-sit uffiċjali ta' Einhell websit: www.einhell.com
