Mophorn Remote Control Automatic Parking Lock Instruction Manual

1. Prodott Aktarview

The Mophorn Remote Control Automatic Parking Lock is designed to secure your private parking space. It features a robust, waterproof metal casing and offers convenient remote operation. This device helps prevent unauthorized parking and provides protection against external impacts.

Figure 1: Mophorn Automatic Parking Lock with key dimensions.

Karatteristiċi ewlenin:

• Kostruzzjoni Durabbli: Features a robust, waterproof metal casing with a smooth paint finish. Designed for internal mounting to deter theft.
• 180° Anti-Collision: The parking lock arm has a flexible design that allows it to pivot up to 180 degrees, protecting it from external collisions.
• Automatic Alarm System: Equipped with an alarm that activates upon unauthorized operation or attempts to force the arm down.
• High Pressure Resistance: The curved design and thick steel shell allow the parking lock to withstand up to 5 tons of pressure without damage.
• Kontroll mill-bogħod: Operates with a remote control, offering an effective range of up to 30 meters for convenient use.

2. Setup u Installazzjoni

Proper installation ensures the security and functionality of your parking lock. The unit is designed for secure floor mounting.

Passi ta' Installazzjoni:

1. Agħżel Post: Select a suitable, flat surface within your parking space for mounting. Ensure the location allows for the full range of motion of the parking lock arm.
2. Immarka l-Punti tat-Tħaffir: Place the parking lock base on the desired spot and mark the positions for the mounting holes.
3. Drill toqob: Use an appropriate drill bit to create holes at the marked points.
4. Assigura l-Unità: Insert the provided expansion bolts into the drilled holes. Place the parking lock over the bolts and tighten securely. Ensure the unit is firmly attached to the ground.
5. Installazzjoni tal-batterija: Open the battery compartment on the base of the unit. Insert 4 D-cell batteries (not included) according to the polarity indicators. Close the compartment securely.

Figure 2: Included components for installation and operation.

Figure 3: Parking lock in the upright, secured position.

Figure 4: Parking lock in the flat, unlocked position.

3. Istruzzjonijiet Operattivi

The parking lock is operated using the provided remote control.

L-użu tal-Kontroll mill-bogħod:

• To raise the parking lock arm (secure position), press the Up buttuna fuq il-kontroll remot.
• To lower the parking lock arm (unlocked position), press the Down buttuna fuq il-kontroll remot.

Figure 5: Operating the parking lock with the remote control.

Automatic Alarm System:

The integrated alarm system will activate if the parking lock arm is subjected to unauthorized force or attempts to be manually lowered without the remote control. This provides an additional layer of security for your parking space.

4. Manutenzjoni

Regular maintenance ensures the longevity and optimal performance of your Mophorn parking lock.

Sostituzzjoni tal-batterija:

• When the battery level is low, the unit may indicate this with a specific light pattern or reduced performance.
• To replace batteries, use the provided key to unlock the battery compartment on the base.
• Remove the old batteries and insert 4 new D-cell batteries, ensuring correct polarity.
• Securely close and lock the battery compartment.

Figure 6: Key lock for accessing the battery compartment.

Tindif u Kura:

• Imsaħ il-parti ta 'barra tal-unità b'annunzjaamp drapp biex tneħħi l-ħmieġ u l-fdalijiet. Evita prodotti tat-tindif li joborxu.
• While the unit is waterproof, avoid submerging it in water for extended periods (e.g., more than 4 hours).
• Regularly check mounting bolts for tightness and re-tighten if necessary.

5 Issolvi l-problemi

This section addresses common issues you might encounter with your parking lock.

Il-Kontroll mill-bogħod ma Jirrispondix:

• Iċċekkja Batteriji: Ensure the batteries in both the parking lock and the remote control are fresh and correctly installed.
• Re-pair Remote Control: If the remote control loses connection, follow these steps to re-pair it:
  
  1. Connect the power supply (ensure batteries are installed). The LED indicator will light up for approximately 4 seconds.
  2. During this 4-second window, first press the Nisfruttaw button on the remote, then immediately press the Lock buttuna.
  3. A flashing LED on the parking lock indicates successful pairing.
• Ostruzzjoni: Ensure there are no physical obstructions between the remote control and the parking lock.

Alarm Sounds Unexpectedly:

• Check for Tampering: The alarm is designed to activate if unauthorized force is applied. Inspect the unit for signs of tampering or impact.
• Fatturi Ambjentali: Extreme weather conditions or vibrations might trigger the alarm. Ensure the unit is securely mounted.

Parking Lock Arm Does Not Move Smoothly:

• Ċar Debris: Check for any debris (e.g., small stones, leaves) obstructing the arm's movement mechanism.
• Lubrikazzjoni: Apply a small amount of silicone-based lubricant to the pivot points if movement feels stiff.

Figure 7: The 180-degree anti-collision feature allows the arm to flex upon impact.

6. Speċifikazzjonijiet

Detailed technical specifications for the Mophorn Automatic Parking Lock.

7. Garanzija u Appoġġ

Għal informazzjoni dwar il-garanzija jew appoġġ tekniku, jekk jogħġbok irreferi għad-dokumentazzjoni pprovduta fil-ħin tax-xiri jew ikkuntattja lill-bejjiegħ tiegħek. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri.