Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Introduzzjoni

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Informazzjoni dwar is-Sigurtà

• Aqra l-istruzzjonijiet kollha bir-reqqa qabel l-installazzjoni u t-tħaddim.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Żomm l-apparat fejn ma jintlaħaqx mit-tfal.

3. Kontenut tal-Pakkett

Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x Bracket tal-Immuntar
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Prodott Aktarview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Figura 1: Quddiem view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Komponenti Ewlenin:

• PIR Lens: Detects infrared radiation from moving bodies.
• Indikatur LED: Provides status feedback (e.g., detection, low battery).
• Kompartiment tal-batterija: Houses the power source.
• Punti ta' Muntaġġ: For secure installation on a wall.
• Tamper Iswiċċ: Triggers an alarm if the sensor cover is opened.

5. Setup

5.1. Installazzjoni tal-batterija

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Immuntar tas-Sensor

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Uża l-parentesi tal-immuntar bħala mudell biex timmarka l-pożizzjonijiet tal-kamin fuq il-ħajt.
3. Agħmel toqob fil-pożizzjonijiet immarkati u daħħal it-tappijiet tal-ħajt.
4. Waħħal il-bracket tal-immuntar mal-ħajt billi tuża l-viti pprovduti.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Tħaddim tas-Sensor

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LED Indikatur Status

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• Ebda Dawl: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Manutenzjoni

7.1. Tindif

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Sostituzzjoni tal-batterija

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Kontrolli regolari

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8 Issolvi l-problemi

9. Speċifikazzjonijiet

• Ditta: Intelbras
• Mudell: IVP2000SF
• Sors tal-Enerġija: Li jaħdem bil-batterija
• Tip ta 'batterija: Alkalin
• Tip ta 'Immuntar: Immonta fuq il-ħajt
• Apparati Kompatibbli: Intelbras security systems and smart home hubs
• Dimensjonijiet tal-Prodott: Madwar 17 x 10 x 9 ċm (6.7 x 3.9 x 3.5 pulzieri)
• Metodu ta' Sejbien: Infrared Passiv (PIR)
• Firxa ta' sejbien: Sa 12 metri (39 pied)
• Angolu ta' sejbien: Madwar 90 gradi
• Ambjent Operattiv: Użu fuq ġewwa biss

10. Informazzjoni dwar Garanzija

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webis-sit jew ikkuntattja l-appoġġ għall-klijenti tagħhom. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

11. Appoġġ

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Websit: Visit the official Intelbras websit għal riżorsi ta' appoġġ, FAQs, u informazzjoni ta' kuntatt.
• Telefon: Refer to the contact section on the Intelbras websit għal numri ta' appoġġ lokali.