Spektrum S120 USB-C Smart Charger 1x20W Instruction Manual

Introduzzjoni

The Spektrum S120 USB-C Smart Charger is designed for convenient and safe charging of compatible Spektrum Smart batteries. This 20W charger automatically detects battery information and initiates charging when connected to a USB power source. It is compatible with 2-3 cell Spektrum Smart LiPo/LiFe/LiHV and 6-7 cell Smart NiMh batteries.

Informazzjoni dwar is-Sigurtà

TWISSIJA: Aqra l-manwal tal-istruzzjonijiet KOLLU biex tiffamiljarizza ruħek mal-karatteristiċi tal-prodott qabel ma tħaddem. Jekk il-prodott ma jitħaddemx b'mod korrett, dan jista' jirriżulta fi ħsara lill-prodott, lill-proprjetà personali u jikkawża korriment serju. Dan huwa prodott sofistikat għal passatemp. Għandu jitħaddem b'kawtela u b'sens komun u jeħtieġ xi kapaċità mekkanika bażika. Jekk dan il-Prodott ma jitħaddemx b'mod sikur u responsabbli, dan jista' jirriżulta fi korriment jew ħsara lill-prodott jew proprjetà oħra. Dan il-prodott mhuwiex maħsub għall-użu mit-tfal mingħajr is-superviżjoni diretta ta' adult. Tużax ma' komponenti inkompatibbli jew tbiddilx dan il-prodott b'xi mod barra mill-istruzzjonijiet ipprovduti minn Horizon Hobby, LLC. Il-manwal tal-prodott fih struzzjonijiet għas-sigurtà, it-tħaddim u l-manutenzjoni. Huwa essenzjali li taqra u ssegwi l-istruzzjonijiet u t-twissijiet kollha fil-manwal, qabel l-assemblaġġ, is-setup jew l-użu, sabiex tħaddem b'mod korrett u tevita ħsara jew korriment serju.

X'hemm fil-Kaxxa

• Spektrum S120 USB-C Smart Charger 1x20W, SPMXC1020
• USB-C għal USB-A Cable

Prodott Overview

Setup

Konnessjoni tal-Enerġija

1. Connect the included USB-C to USB-A cable to the charger's USB-C port.
2. Plug the USB-A end of the cable into a compatible USB power source (not included). Ensure the power source can provide sufficient wattage (20W recommended for optimal performance).

Istruzzjonijiet Operattivi

Charging a Smart Battery

1. Ensure the Spektrum S120 charger is connected to a functional USB power source.
2. Connect your Spektrum Smart battery to the charger. For LiPo, LiFe, and LiHV batteries, both the main lead (IC3 connector) and the balance lead must be connected. For NiMh batteries, only the main lead is required.
3. The charger will automatically detect the battery information (type, cell count) and begin the charging process.

Indikatur ta ' l-Istatus LED

Monitor the LED light on the charger for status indication:

• Blinking Purple or Yellow: Iċċarġjar għaddej.
• Aħdar Solidu: Iċċarġjar komplut.

Manutenzjoni

Tindif

Regularly clean the charger's exterior with a soft, dry cloth. Do not use solvents, abrasive cleaners, or allow moisture to enter the device.

Ħażna

Store the charger in a cool, dry place away from direct sunlight, extreme temperatures, and moisture when not in use.

Cable and Connector Inspection

Periodically inspect the USB-C cable and all battery connectors (IC3 and balance ports) for any signs of wear, damage, or corrosion. Replace damaged components immediately to ensure safe operation.

Issolvi l-problemi

Iċ-Ċarġer Ma Jixgħel

• Ensure the USB-C cable is securely connected to both the charger and a functional USB power source.
• Verify that the USB power source is active and providing power. Try a different USB port or power adapter if available.

Batterija Mhux Iċċarġjar

• Confirm that you are using a compatible Spektrum Smart battery (2-3 cell LiPo/LiFe/LiHV or 6-7 cell NiMh).
• For LiPo, LiFe, and LiHV batteries, ensure both the main IC3 connector and the balance lead are correctly and fully connected to the charger.
• Check for any visible damage to the battery or charger connectors.

Iċċarġjar bil-mod

• Charging speed is dependent on the power output of your USB source. For optimal 20W charging, use a USB power adapter capable of delivering 20W.
• Ensure the USB cable used is of good quality and capable of handling the required power delivery.

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information, technical support, and service inquiries, please refer to the official Spektrum website or contact their customer service directly. Specific warranty details are not provided within this instruction manual.