1. Prodott Aktarview
The GOOACC GRC-70 fastener kit provides a comprehensive solution for replacing engine under cover, splash shield, body bolts, bumper, fender liner, and other automotive retainers. This kit includes a variety of clips and bolts designed for direct replacement and perfect fitment in specified vehicle models. The components are made from durable, corrosion-resistant materials to ensure long-lasting performance.
Figure 1: Complete GOOACC GRC-70 35-piece fastener kit.
2. Kompatibilità u Twaħħil
This fastener kit is designed to fit various Infiniti and Nissan models. Please verify that the parts shown in the manual are identical to your vehicle's original components before installation.
Mudelli ta' Vetturi Kompatibbli:
- 2003-2008 Infiniti G35 Sedan
- 2003-2007 Infiniti G35 Coupe
- 2008-2014 Infiniti G37 & G37X
- 2003-2008 Infiniti FX35 & FX45
- 2008-2012 Infiniti EX35
- 2009-2014 Nissan 370Z
- 2003-2009 Nissan 350Z
3. Kontenut tal-Pakkett
The GOOACC GRC-70 kit includes 35 pieces of various fasteners, designed for specific applications:
- 10 x Extruded U-nuts: These corrosion-resistant U-nuts are primarily used for replacing or fixing components to the bumper.
- 15 x Body Bolts with Built-in Fender Washer: These corrosion-resistant bolts are designed for secure fastening of body panels.
- 10 x Plastic Push Clips: These clips are versatile and widely used for various applications including radiator yoke, trim panels, door trim, door panels, bumpers, car fender flares, side skirts, grilles, wheel wells, air intakes, engine covers, mud flaps, and splash guard shields.
Figura 2: Dettaljat view of the kit components.
4. Istruzzjonijiet ta 'installazzjoni
Follow these general guidelines for installing the fasteners. Specific vehicle repair manuals should be consulted for detailed procedures.
4.1. Installing Extruded U-nuts and Body Bolts
Extruded U-nuts are designed to provide a threaded receptacle for bolts, often used on thin panels or edges. The body bolts are then threaded into these U-nuts.
- Identify the mounting location for the U-nut. Ensure the panel edge or hole aligns with the U-nut's design.
- Slide the U-nut onto the panel edge or into the designated opening until it is securely seated. The U-nut should grip the panel firmly.
- Align the component to be fastened (e.g., splash shield) with the U-nut's threaded hole.
- Insert a body bolt through the component's hole and into the U-nut.
- Tighten the body bolt using an appropriate wrench or socket. Avoid over-tightening to prevent stripping the threads or damaging the U-nut/panel.
Figure 3: Installation steps for Extruded U-nuts and Body Bolts.
Figure 4: Extruded U-nuts.
4.2. Installing Plastic Push Clips
Plastic push clips are designed for quick and easy installation, providing a secure hold for various trim and panel components.
- Ensure the receiving hole is clean and free of debris.
- Align the push clip with the hole in the panel or component.
- Insert the pointed end of the clip into the hole.
- Apply firm, even pressure to the head of the clip until it clicks into place and sits flush with the surface. This expands the clip's prongs behind the panel, securing it.
- To remove, a trim removal tool may be required to pry the clip out without damage.
Figure 5: Installation steps for Plastic Push Clips.
4.3. Applikazzjonijiet Komuni
These fasteners are commonly used in areas such as:
- Engine Under Covers
- Splash Shields
- Komponenti tal-bumper
- Fender Liners
- Door Trim and Panels
- Grilles and Radiator Yokes
- Wheel Wells and Mud Flaps
Figura 6: Eżamples of fastener applications in a vehicle.
Figure 7: Diagram of common installation points for fasteners.
5. Speċifikazzjonijiet tal-Prodott
| Attribut | Dettall |
|---|---|
| Brand | GOOACC |
| Mudell | GRC-70 |
| Numru ta' Biċċiet | 35 |
| Materjal | Nylon (for push clips), Corrosion-Resistant Metal (for U-nuts and bolts) |
| Tip ta' Qafliet | Push (clips), Threaded (bolts) |
| Stil tar-ras | Hex (bolts) |
| Tip Finish | Matte |
| Daqs tal-ħajt | M5 or #10-32 (for bolts) |
| Piż tal-oġġett | 6.4 uqija |
| Dimensjonijiet tal-Prodott | 1.3 x 3.66 x 4.61 pulzieri (ippakkjar) |
6. Manutenzjoni
The metal components of this kit are designed to be corrosion-resistant, ensuring durability in various environmental conditions. Regular inspection of all fasteners during routine vehicle maintenance is recommended to ensure they remain securely in place and are free from damage or excessive wear. Replace any damaged or missing fasteners promptly to maintain the integrity of your vehicle's underbody components.
7 Issolvi l-problemi
Most issues related to these fasteners can be resolved by ensuring proper selection and installation.
- Fastener does not fit: Double-check the compatibility list and compare the dimensions of the provided fasteners with your vehicle's original parts. Ensure you are using the correct type of fastener (U-nut, bolt, or push clip) for the specific application.
- Fastener is loose after installation: Ensure the fastener is fully seated and tightened to the appropriate specification (for bolts). For push clips, ensure they are fully pushed in until they click. Excessive wear on the receiving hole may prevent a secure fit, requiring repair of the hole or a slightly larger fastener if available.
- Component rattling or vibrating: This may indicate a loose or missing fastener. Inspect all relevant attachment points and replace or re-secure any compromised fasteners.
8. Garanzija u Appoġġ
For information regarding product warranty, returns, or additional support, please refer to the GOOACC official store or contact customer service through the platform where the product was purchased. You can visit the official GOOACC store for more products and information: GOOACC Store.
