Manwal tal-Utent tal-Ispeaker Bluetooth bla Fili BlitzWolf BW-AS1

1. Introduzzjoni

The BlitzWolf BW-AS1 is a high-fidelity wireless Bluetooth speaker designed to deliver clear, balanced audio. Featuring dual drivers and a robust battery, it offers versatile connectivity options including Bluetooth 4.0 and a 3.5mm AUX-in port, along with hands-free calling capabilities.

2. Kontenut tal-Pakkett

Jekk jogħġbok iċċekkja l-pakkett għall-oġġetti li ġejjin:

• 1x BlitzWolf BW-AS1 Wireless Bluetooth Speaker
• 1x USB Iċċarġjar Cable
• 1x Audio Cable ta '3.5mm
• 1x Manwal għall-Utent

3. Prodott Aktarview

Figura 3.1: Kontrolli tal-Panel ta' Fuq
This image displays the top surface of the BlitzWolf BW-AS1 speaker, highlighting the power button, play/pause button, and volume control buttons.

Figura 3.2: Portijiet tal-Panel ta' Wara
This image shows the back of the BlitzWolf BW-AS1 speaker, indicating the DC 5V charging port and the AUX-in port.

Funzjonijiet tal-buttuna:

• Buttuna tal-Qawwa: Press and hold to power on/off. Short press to switch modes (Bluetooth/AUX).
• Buttuna Play/Pause: Short press to play or pause music. During a call, short press to answer/end, long press to reject.
• Volum 'l isfel (-): Agħfas qasir biex tnaqqas il-volum. Agħfas fit-tul għat-trakka ta' qabel.
• Volum 'il fuq (+): Agħfas qasir biex iżżid il-volum. Agħfas fit-tul għat-trakka li jmiss.

4. Setup

4.1 Iċċarġjar tal-Ispeaker

1. Connect the provided USB charging cable to the DC 5V port on the speaker.
2. Qabbad it-tarf l-ieħor tal-kejbil USB ma' adapter tal-enerġija USB (mhux inkluż) jew mal-port USB tal-kompjuter.
3. Id-dawl indikatur tal-iċċarġjar jixgħel. Iċċarġjar sħiħ jieħu madwar 3.5 sigħat.
4. Once fully charged, the indicator light will change or turn off (refer to specific LED behavior in the next section).

4.2 Tixgħel/Jitfi

• Biex tixgħel, agħfas u żomm il-buttuna Buttuna tal-Qawwa until you hear an audible prompt.
• Biex tintefa, agħfas u żomm il-buttuna Buttuna tal-Qawwa again until you hear an audible prompt.

5. Istruzzjonijiet Operattivi

5.1 Tqabbil tal-Bluetooth

1. Ensure the speaker is powered on and in Bluetooth pairing mode (indicated by a flashing LED, typically blue). If not, short press the Buttuna tal-Qawwa biex taqleb il-modi.
2. Fuq l-apparat mobbli tiegħek (smartphone, tablet, laptop), attiva l-Bluetooth.
3. Fittex għal available Bluetooth devices. You should see "BW-AS1" in the list.
4. Select "BW-AS1" to connect. Once paired, the speaker will emit an audible confirmation, and the LED indicator will become solid blue.
5. L-ispiker jipprova awtomatikament jerġa' jikkonnettja mal-aħħar apparat imqabbad meta jinxtegħel.

5.2 Modalità AUX-in

1. Connect one end of the provided 3.5mm audio cable to the AUX-in port on the speaker.
2. Connect the other end of the 3.5mm audio cable to the audio output jack of your device (e.g., smartphone, MP3 player, computer).
3. The speaker will automatically switch to AUX-in mode, or you may need to short press the Buttuna tal-Qawwa to cycle to AUX mode.
4. Audio will now play through the speaker from your connected device. Volume can be controlled via both the speaker and the connected device.

5.3 Sejħiet mingħajr idejn

• When a call comes in while connected via Bluetooth, the music will pause.
• Agħfas qasir il- Buttuna Play/Pause biex iwieġeb is-sejħa.
• Biex ittemm is-sejħa, agħfas qasir il- Buttuna Play/Pause mill-ġdid.
• Biex tirrifjuta sejħa deħlin, agħfas fit-tul il- Buttuna Play/Pause.

6. Manutenzjoni

• Naddaf l-ispiker b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• Evita li tesponi l-ispiker għal temperaturi estremi, dawl tax-xemx dirett, jew umdità għolja.
• Aħżen l-ispiker f'post frisk u niexef meta ma jkunx qed jintuża għal perjodi twal.
• Do not attempt to disassemble or repair the speaker yourself, as this will void the warranty and may cause damage.

7 Issolvi l-problemi

8. Speċifikazzjonijiet