Accessory USA AC/DC Adapter for Astak CM-811T CM-707 Wireless Camera Receiver

Introduzzjoni

This manual provides essential instructions for the safe and effective use of your Accessory USA AC/DC Adapter, designed for compatibility with Astak CM-811T and CM-707 2.4GHz Wireless Receiver Cameras. Please read this manual thoroughly before use and retain it for future reference.

Informazzjoni dwar is-Sigurtà

Biex tiżgura tħaddim sikur u tevita ħsara, osserva l-prekawzjonijiet li ġejjin:

• Kun żgur li l-volum tal-adaptertage and current output match the requirements of your device. This adapter provides 12V DC output.
• Tesponix l-adapter għall-ilma, umdità, jew temperaturi estremi.
• Evita li twaqqa' l-adapter jew li tissottomettih għal impatti qawwija.
• Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
• Skonnettja l-adapter mis-sokit tal-enerġija meta ma tkunx qed tużah għal perjodi twal.
• This product is equipped with Over VoltagProtezzjoni minn Kurrent Żejjed (OVP), Protezzjoni minn Kurrent Żejjed (OCP), u Protezzjoni minn Ċirkwit Qasir (SCP) biex tissalvagwardja l-apparati tiegħek.

Setup

Follow these steps to connect your AC/DC adapter:

1. Ivverifika l-Kompatibbiltà: Confirm that your device (Astak CM-811T or CM-707 2.4GHz Wireless Receiver Camera) requires a 12V DC power supply.
2. Qabbad mal-Apparat: Insert the barrel connector of the adapter's output cable firmly into the power input port of your Astak wireless receiver camera.
3. Qabbad mal-Power Outlet: Plug the AC input prongs of the adapter into a standard wall power outlet.
4. Qawwa Mixgħul: Your device should now receive power. Refer to your device's manual for specific power-on procedures.

Image shows the Accessory USA AC/DC power adapter, featuring a black casing with a power cord and a barrel connector, ready for connection.

Istruzzjonijiet Operattivi

The Accessory USA AC/DC Adapter operates as a simple plug-and-play power supply. Once correctly connected to a compatible device and a power outlet, it will continuously supply the necessary DC power. No further user interaction is required for its operation.

Manutenzjoni

Biex tiżgura l-lonġevità u l-prestazzjoni ottimali tal-adapter tiegħek:

• Keep the adapter clean by wiping it with a dry, soft cloth. Do not use liquid cleaners.
• Aħżen l-adapter f'post frisk u niexef meta ma jkunx qed jintuża.
• Avoid wrapping the power cord too tightly around the adapter, as this can damage the cable.
• Regularly inspect the cable and connectors for any signs of wear or damage. Discontinue use if damage is observed.

Issolvi l-problemi

Jekk tiltaqa' ma' problemi bl-adapter tiegħek, ikkunsidra dan li ġej:

• L-ebda Enerġija għall-Apparat:
  • Kun żgur li l-adapter huwa pplaggjat sew kemm fis-sokit tal-ħajt kif ukoll fit-tagħmir tiegħek.
  • Ittestja s-sokit tal-ħajt b'apparat ieħor biex tikkonferma li jaħdem.
  • Verify that your device is compatible with a 12V DC power supply.
• Is-sħana żejda tal-adapter:
  • Ensure the adapter is used in a well-ventilated area.
  • Confirm that the device connected is not drawing excessive power.
  • Jekk is-sħana żejda tippersisti, waqqaf l-użu u ikkuntattja l-appoġġ.

Speċifikazzjonijiet

Garanzija u Appoġġ

This adapter is a replacement unit manufactured by Accessory USA. For any questions, technical assistance, or warranty inquiries, please contact the seller or manufacturer directly through your purchase platform. Please note that specific warranty terms may vary and are typically provided at the point of purchase.