Introduzzjoni
This manual provides essential instructions for the safe and efficient use of your RYOBI OP404 Lithium-ion 40 Volt Battery Charger. This compact charger is designed to charge all RYOBI 40-Volt lithium-ion batteries. It features innovative charging technology to protect and extend battery life, and can be wall-mounted for convenient storage and accessibility.
Informazzjoni Importanti dwar is-Sigurtà
TWISSIJA: Aqra t-twissijiet, l-istruzzjonijiet, l-illustrazzjonijiet u l-ispeċifikazzjonijiet kollha dwar is-sigurtà pprovduti ma’ din l-għodda tal-enerġija. In-nuqqas ta' segwitu tal-istruzzjonijiet kollha elenkati hawn taħt jista' jirriżulta f'xokk elettriku, nar, u/jew korriment serju.
- Always ensure the charger is connected to a power source with the correct voltage.
- Do not expose the charger to rain or wet conditions. Water entering a battery charger will increase the risk of electric shock.
- Use only with RYOBI 40-Volt lithium-ion batteries. Attempting to charge other types of batteries may cause personal injury and damage.
- Tħaddimx il-ċarġer jekk ikun irċieva daqqa qawwija, waqa', jew ġarrab xi ħsara b'xi mod ieħor.
- Żarmax il-ċarġer. Ħudha għand persuna ta' servizz kwalifikata meta tkun meħtieġa servizz jew tiswija. Assemblaġġ mill-ġdid mhux korrett jista 'jirriżulta f'riskju ta' xokk elettriku jew nar.
- Unplug the charger from the power source before attempting any maintenance or cleaning.
- Do not use the charger in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Żomm iċ-ċarġer 'il bogħod mit-tfal.
Setup
Before first use, ensure the charger is placed on a stable, flat surface or securely mounted to a wall. Connect the charger's power adapter to a standard electrical outlet.

Figure 1: The RYOBI OP404 charger connected to its power adapter, ready for use.
The charger is designed for portability and can be easily transported with your tools. It also features a USB port for additional charging flexibility.

Figura 2: Ġenb view of the RYOBI OP404 charger, highlighting the power input port.
Istruzzjonijiet Operattivi
Iċċarġjar ta 'batterija
- Ensure the charger is plugged into a working power outlet. The "Power On" LED indicator (red) will illuminate.
- Align the RYOBI 40-Volt lithium-ion battery with the charger's battery interface.
- Slide the battery onto the charger until it clicks securely into place.
- Il-ċarġer jibda l-proċess tal-iċċarġjar awtomatikament.

Figure 3: The RYOBI OP404 charger with a 40V battery securely attached and in the process of charging.
Gwida tal-Indikatur LED
Il-ċarġer għandu indikaturi LED biex jikkomunikaw l-istatus tal-batterija:

Figura 4: Close-up view of the RYOBI OP404 charger's LED indicators, detailing various status lights.
| Indikatur | Status | Deskrizzjoni |
|---|---|---|
| Dawl Aħmar (Solid) | Qawwa Mixgħul | The charger is connected to power and ready. |
| Orange Light (Flashing) | Ittestjar | The charger is evaluating the battery condition. |
| Red Light (Flashing) | Difettuża | The battery is defective and cannot be charged. |
| Green Light (Flashing) | Iċċarġjar | Il-batterija bħalissa qed tiċċarġja. |
| Dawl Aħdar (Solid) | Lest | Il-batterija hija kompletament iċċarġjata u lesta għall-użu. |
Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-ċarġer tiegħek.
- Tindif: Disconnect the charger from the power source before cleaning. Use a clean, dry cloth to wipe off any dust or debris from the charger's exterior. Do not use solvents or harsh chemicals.
- Ħażna: Store the charger in a cool, dry place, away from direct sunlight and moisture.
- Spezzjoni: Periodically inspect the power cord and charger for any signs of damage. If any damage is found, discontinue use and contact customer support.
Issolvi l-problemi
If you encounter issues with your RYOBI OP404 charger, refer to the following common troubleshooting steps:
- Il-ċarġer mhux mixgħul:
- Ensure the power cord is securely plugged into both the charger and a functional electrical outlet.
- Check the outlet with another device to confirm it has power.
- Battery not charging (Defective LED flashing):
- Remove the battery from the charger and re-insert it to ensure proper connection.
- If the "Defective" LED continues to flash, the battery may be damaged or at the end of its life.
- Iċċarġjar bil-mod:
- Ensure the charger is operating within its recommended temperature range. Extreme temperatures can affect charging speed.
- Verify that the battery is a genuine RYOBI 40-Volt lithium-ion battery.
For further assistance, please refer to the official RYOBI product support resources.
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | RYOBI |
| Numru tal-Mudell | OP401A |
| Dimensjonijiet tal-Prodott | 3 x 5 x 1 pulzieri (7.62 x 12.7 x 2.54 ċm) |
| Piż tal-oġġett | 12.6 uqija (0.36 Kilogrammi) |
| Ħruġ Voltage | 40 Volts |
| Input Voltage | 40 Volts |
| Data L-Ewwel Disponibbli | 13 ta’ Ġunju 2019 |
Garanzija u Appoġġ
Għal informazzjoni dettaljata dwar il-garanzija u l-appoġġ għall-klijenti, jekk jogħġbok irreferi għar-RYOBI uffiċjali website or the documentation included with your product at the time of purchase. Keep your proof of purchase for warranty claims.





