1. Prodott Aktarview
The Beta 1972/18 is an ultra-compact 18V brushless impact driver designed for professional use. It features a digital motor for enhanced performance, offering more power, reduced consumption, and precise power dosage.
- Mutur Diġitali mingħajr brushes: Provides increased power and efficiency.
- Torque Għoli: Up to 75 Nm for demanding applications.
- Veloċità Varjabbli: Up to 2100 RPM for versatile drilling and driving.
- LED Front Lighting: Idawwal iż-żona tax-xogħol għal viżibilità aħjar.
- Protezzjoni tal-batterija: Triple battery self-protection against overload and cell power differences.
Figure 1.1: The Beta 1972/18 Impact Driver, showcasing id-disinn kompatt u l-manku ergonomiku tiegħu.
2. Komponenti Inklużi
Your Beta 1972/18 Impact Driver package includes the following items:
- Beta 1972/18 Impact Driver
- 2 x Batteriji tal-Litju-Jone ta' 5Ah
- Quick Charger (80 minutes charging time)
- Hard Case for storage and transport
- Belt Clip (right/left mountable)
Figure 2.1: All components of the Beta 1972/18 kit neatly organized within the durable hard case.
3. Setup u Assemblea
3.1 Iċċarġjar tal-batterija
- Connect the quick charger to a suitable power outlet.
- Slide the 5Ah Lithium-Ion battery onto the charger until it clicks into place.
- Allow approximately 80 minutes for a full charge. The charger will indicate when charging is complete.
- Ladarba tkun iċċarġjata, neħħi l-batterija mill-ċarġer.
3.2 Installazzjoni tal-Batterija
- Align the charged battery with the base of the impact driver.
- Slide the battery firmly into the tool until it locks securely.
- To remove, press the battery release buttons on the sides and slide the battery out.
3.3 It-twaħħil tal-Klip taċ-Ċinturin
The belt clip can be attached to either the right or left side of the tool for convenient carrying.
- Locate the screw hole on the side of the tool where you wish to attach the clip.
- Align the belt clip with the hole and secure it with the provided screw.
4. Istruzzjonijiet Operattivi
4.1 Ixgħel/Itfi u Kontroll tal-Veloċità
- To power on the tool, press the trigger switch. The LED front light will illuminate.
- Biex titfi, itlaq is-swiċċ tal-grillu.
- The tool features a variable speed trigger. Pressing the trigger further increases the speed up to 2100 RPM.
- Use the speed selector switch (if present, typically near the chuck) to choose between two speed ranges for different applications.
4.2 Aġġustament tat-Torque
The torque collar allows you to adjust the amount of torque applied, preventing overtightening or stripping screws. Rotate the collar to select the desired torque setting, up to 75 Nm.
4.3 Tħaffir u Sewqan
- Insert the appropriate drill bit or driver bit into the chuck. Tighten the chuck securely.
- Select the desired speed and torque setting.
- Poġġi l-għodda sew mal-biċċa tax-xogħol.
- Press the trigger to begin drilling or driving. Apply steady, even pressure.
- For drilling into steel, the maximum recommended diameter is 13 mm. For wood, it is 45 mm.
Figure 4.1: Demonstrating the Beta 1972/18 in action, drilling into a wooden surface.
Figure 4.2: The compact design allows for use in confined spaces, such as under a car hood.
5. Manutenzjoni
5.1 Tindif
- Dejjem skonnettja l-batterija qabel ma tnaddafha.
- Imsaħ l-għodda b'ċarruta nadifa, damp drapp. Tużax kimiċi ħarxa jew tindif li joborxu.
- Keep ventilation openings clear of dust and debris. Use compressed air if necessary.
5.2 Kura u Ħażna tal-Batterija
- Aħżen il-batteriji f'post frisk u niexef 'il bogħod mix-xemx diretta u temperaturi estremi.
- Għal ħażna fit-tul, iċċarġja l-batteriji sa madwar 50% tal-kapaċità tagħhom.
- Taħżinx il-batteriji fi stat skarikat biex tevita l-ħsara.
5.3 Manutenzjoni Ġenerali
- Regularly inspect the chuck for wear and tear.
- Check the power cord of the charger for any damage.
- Ensure all screws and fasteners on the tool are tight.
6 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Għodda ma tibda | Il-batterija mhux iċċarġjata jew mhux imdaħħla sew. | Kun żgur li l-batterija tkun iċċarġjata kompletament u mdaħħla sew. |
| Qawwa/prestazzjoni mnaqqsa | Batterija baxxa jew għodda mgħobbija żżejjed. | Erġa' ċċarġja l-batterija. Naqqas it-tagħbija fuq l-għodda. |
| Il-batterija mhix qed tiċċarġja | Charger not connected, faulty battery, or extreme temperature. | Check charger connection. Allow battery to reach room temperature. Contact support if issue persists. |
| Vibrazzjoni jew storbju eċċessiv | Loose bit, damaged chuck, or internal issue. | Ensure bit is securely fastened. Inspect chuck for damage. If problem persists, seek professional service. |
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Manifattur | Beta |
| Numru tal-Parti | 019720018 |
| Numru tal-Mudell tal-Oġġett | Beta 1972/18 |
| Sors tal-Enerġija | Electric (Battery) |
| Voltage | 18 Volts |
| Torque | 75 Newton Metru |
| Veloċità | 2100 RPM (Massimu) |
| Karatteristiċi Speċjali | Brushless Motor, Compact |
| Użu | Professjonali |
| Komponenti Inklużi | 2 x 5Ah Li-ion batteries, Quick charger (80 min) |
| Tip taċ-Ċellula tal-Batterija | Jonju tal-litju |
| Piż tal-oġġett | 5.88 kg |
| Dimensjonijiet tal-Pakkett | 46.5 x 36 x 14.5 ċm |
| Data L-Ewwel Disponibbli | 15 ta’ Ġunju 2019 |
8. Garanzija u Appoġġ
The Beta 1972/18 Impact Driver comes with a 3-Sena Garanzija, u tiżgura s-serħan tal-moħħ rigward il-kwalità u l-prestazzjoni tiegħu.
Beta Tools is a leading company in Italy for the design and production of professional work tools. They maintain a strong presence with three production facilities in Italy, demonstrating their commitment to quality and customer satisfaction.
For technical assistance, warranty claims, or any product-related inquiries, please refer to the contact information provided in your product packaging or visit the official Beta Tools websit. Żomm l-irċevuta tax-xiri tiegħek bħala prova tax-xiri għal skopijiet ta' garanzija.
Għal aktar informazzjoni, tista' żżur il- Beta Brand Page on Amazon.
