1. Prodott Aktarview
The Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card is designed to add a single parallel port to your computer system via a PCI Express slot. This card enables connectivity with various parallel devices, including printers, programmers, and scanners, that utilize the IEEE 1284 printing protocol. It supports a wide range of operating systems, ensuring broad compatibility for legacy hardware integration.

Stampa 1.1: The Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card, showing the DB25 connector and the PCI Express interface, alongside the included low-profile parentesi.
2. Kontenut tal-Pakkett
- 1 x Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card
- 1 x Low-profile Bracket (Cover Board)
- 1 x Driver Mini-CD (may vary by package)
3. Setup u Installazzjoni
3.1 Installazzjoni tal-Ħardwer
- Itfi: Kun żgur li l-kompjuter tiegħek huwa mitfi kompletament u skonnettjat mis-sors tal-enerġija.
- Kawża Miftuħa: Open your computer case to access the motherboard's PCI Express slots.
- Agħżel Slott: Locate an available PCI Express x1, x4, x8, or x16 slot. The card is compatible with any of these slot types.
- Identifika Komponenti: Familiarize yourself with the card's components before installation.
- Installa l-Karta: Carefully align the card with the chosen PCI Express slot and press it firmly until it is securely seated.
- Karta Sikura: Secure the card with a screw or retention clip, depending on your computer case design.
- Baxx-Profile Bracket (Mhux obbligatorju): If installing in a small form factor PC, replace the standard bracket with the included low-profile bracket. To do this, remove the two screws holding the standard bracket, detach it, and attach the low-profile bracket bl-użu tal-istess viti.
- Agħlaq il-Każ: Agħlaq il-kaxxa tal-kompjuter tiegħek u erġa' qabbad is-sors tal-enerġija.

Stampa 3.1: The expansion card designed for PCI Express x1 slots, compatible with various PCIe slot sizes.

Stampa 3.2: Key components of the card, including the PCI-E interface and the DB25 LPT parallel port.

Stampa 3.3: Fuq view of the card, illustrating the DB25 port and the PCI Express connector.
3.2 Installazzjoni tas-sewwieq
After hardware installation, you will need to install the necessary drivers for the operating system to recognize and utilize the parallel port.
- Windows Operating Systems (DOS, 2000, XP, Vista, 7, 8, Server 2003-2008, 32/64-bit):
- Insert the provided mini-CD into your computer's CD/DVD drive.
- Navigate to the appropriate driver folder for your operating system version.
- Run the setup executable or follow the instructions to manually install the driver via Device Manager.
- If a CD/DVD drive is unavailable, check the manufacturer's websit għat-tniżżil tas-sewwieqa.
- Linux & OS/X 10.5 and other operating systems:
Many Linux distributions and OS/X 10.5 may automatically detect and install generic drivers. If not, refer to the instructions on the mini-CD or the manufacturer's website for specific Linux/OS/X driver installation procedures.
4. Istruzzjonijiet Operattivi
Once the card is installed and drivers are in place, the parallel port will be available for use by your operating system and applications.
- Qabbad Apparat: Connect your parallel device (e.g., printer, programmer, scanner) to the DB25 LPT port on the expansion card.
- Ikkonfigura s-Softwer: Configure your application or operating system settings to use the newly installed parallel port. The port will typically be assigned as LPT1, LPT2, or LPT3, depending on system configuration.
- Ivverifika l-Funzjonalità: Test the connected device to ensure proper communication and operation.

Stampa 4.1: Dettaljati view of the DB25 LPT parallel port, highlighting its compatibility with various operating systems.
5. Manutenzjoni
The Diyeeni PCIE to DB25 LPT Parallel Port Expansion Card requires minimal maintenance.
- Keep the computer's interior clean and free of dust to prevent overheating and ensure optimal performance of all components, including the expansion card.
- Ensure the card is securely seated in its PCI Express slot.
- Avoid physical damage to the card or its connectors.
6 Issolvi l-problemi
- Karta Mhux Misjuba:
- Kun żgur li l-kard hija mdaħħla sew fl-islott tal-PCI Express.
- Verify that the PCI Express slot is functional. Try another slot if available.
- Check your computer's BIOS/UEFI settings to ensure PCI Express slots are enabled.
- Kwistjonijiet fl-Installazzjoni tas-Sewwieq:
- If using the mini-CD, ensure your CD/DVD drive can read the disc without errors.
- For Windows 10/11, if the provided drivers do not work, try searching for updated drivers on the chip manufacturer's website (e.g., WCH CH382L or similar, if identifiable).
- In Device Manager, check for any devices with a yellow exclamation mark and attempt to update drivers manually.
- Device Not Communicating:
- Verify that the parallel device is correctly connected to the DB25 port.
- Ensure the parallel device is powered on and functioning correctly.
- Check the software configuration to ensure it is pointing to the correct LPT port assigned by the operating system.
- Some older parallel devices or security dongles may have specific timing requirements or driver dependencies that might not be fully compatible with all PCI Express parallel port adapters.
- LinuxCNC Compatibility:
Some users have reported that newer revisions of this card may register as a serial port rather than a parallel port in Linux, which can affect compatibility with applications like LinuxCNC that specifically require a true parallel port for non-Mesa setups. Verify the card's detection in your Linux environment using commands like lspci -v.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Diyeeni |
| Numru tal-Mudell | PCIE to DB25 |
| Interface tal-Ħardwer | PCI Express x1 (compatible with x4, x8, x16 slots) |
| PCIe Specification | Revision 1.1 Compliant |
| Parallel Port Type | DB25 LPT |
| Parallel Protocol Support | Built-in SPP, EPP, ECP compatible IEEE 1284 |
| Kontrollur I/O | High-speed I/O controller (16C550C or compatible UART) |
| Buffer FIFO | FIFO ta' 16-il Byte integrat |
| Disinn tal-Karozzi tal-Linja | 32-bit bus design, supporting PCI 2.1 specification |
| Sistemi Operattivi Appoġġjati | DOS, Windows 95/98/98SE/2000/ME/NT4.0/XP/Vista/7/8 (32/64-bit), Server 2003-2008 (32/64-bit), Linux, OS/X 10.5 |
| Dimensjonijiet (LxWxH) | 4.72 x 3.35 x 0.79 pulzieri (12 x 8.5 x 2 ċm) |
| Piż tal-oġġett | 2.82 uqija (0.08 Kilogrammi) |

Stampa 7.1: Physical dimensions of the expansion card, showing length, width, and height measurements.
8. Garanzija u Appoġġ
For information regarding product warranty, please refer to the documentation provided with your purchase or contact the seller directly. Technical support may be available through the product manufacturer, Diyeeni.





