1. Introduzzjoni
Thank you for choosing the Onforu 55W 5000 LM LED Motion Sensor Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your floodlight. Please read these instructions carefully before installation and retain them for future reference.
Quddiem view of the Onforu 3-head LED motion sensor floodlight.
2. Informazzjoni dwar is-Sigurtà
- Sigurtà Elettrika: L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi lokali u nazzjonali kollha. Kun żgur li l-provvista tal-enerġija tkun skonnettjata qabel l-installazzjoni jew il-manutenzjoni.
- L-ertjar: This product must be properly grounded to prevent electric shock.
- Voltage: Tiżgura l-provvista voltage matches the floodlight's requirements (230 Volts).
- Immuntar: Mount the floodlight securely on a stable surface. Do not install on unstable or vibrating surfaces.
- Temperatura operattiva: Do not operate the floodlight outside its specified temperature range.
- Reżistenza għall-Ilma: The floodlight is IP65 rated, suitable for outdoor use in rain, hail, and snow. However, do not submerge the unit in water. The sensor is IP44 rated.
- Sors tad-Dawl: Do not stare directly into the LED light source when illuminated, as it may cause eye strain or damage.
3. Prodott Aktarview
The Onforu 55W LED Motion Sensor Floodlight features a robust design with three adjustable heads and an integrated PIR motion sensor. It is designed for outdoor security lighting, providing bright, cool white illumination.
Karatteristiċi ewlenin:
- Luminożità Għolja: 5000 Lumens output with 120 LED beads.
- Effiċjenti fl-Enerġija: 55W power consumption, saving up to 80% energy.
- Irjus Aġġustabbli: Three light heads can be adjusted vertically (90°) and side heads horizontally (270°) for wide coverage.
- Sensor tal-Moviment (PIR): Detects movement with adjustable sensitivity, lighting duration, and ambient light settings.
- Durabbli u Ma jgħaddix ilma minnu: IP65 rated aluminum housing and tempered glass for outdoor use.
- Dissipazzjoni effiċjenti tas-sħana: Die-cast aluminum construction ensures extended lifespan.
Internal components showing LED beads and light transmission design.
4. Speċifikazzjonijiet
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Onforu |
| Numru tal-Mudell | BDB55G-3 |
| Konsum tal-Enerġija | 55 Watts |
| Fluss Luminuż | 5000 Lumens |
| Temperatura tal-Kulur | 6500 Kelvin (abjad kiesaħ) |
| Voltage | 230 Volts |
| Materjal | Die-cast Aluminum, Tempered Glass |
| Klassifikazzjoni tal-Protezzjoni tad-Dħul (IP). | IP65 (Floodlight), IP44 (Sensor) |
| Angolu tas-Sejbien tas-Sensor tal-Moviment | 180° |
| Distanza tas-Sejbien tas-Sensor tal-Moviment | 6-12 metri (aġġustabbli) |
| Tul tad-Dawl (ĦIN) | 10 seconds to 7 minutes (adjustable) |
| Medja tal-Ħajja | 50,000 Sigħat |
| Dimensjonijiet tal-Prodott | 27.2 x 14.8 x 12 ċm |
| Piż tal-oġġett | 840 gramma |
| Klassi tal-Effiċjenza tal-Enerġija | F |
EU Energy Label. For more details, scan the QR code or visit eprel.ec.europa.eu/qr/2366865.
5. Installazzjoni
Before beginning installation, ensure the main power supply is turned off at the circuit breaker to prevent electric shock.
5.1 Post tal-Immuntar
- Choose a mounting location that provides the desired coverage area and is within reach of the electrical wiring.
- The ideal mounting height is between 3 to 5 meters (9.84 ft - 16.4 ft) for optimal motion detection and light distribution.
- Avoid mounting near heat sources or objects that could cause false triggers for the motion sensor.
Ideal mounting height and light coverage.
5.2 Istruzzjonijiet tal-Wiring
The floodlight comes with pre-stripped wires for connection. Follow the standard electrical wiring color codes:
- Wajer Kannella: Ħaj (L)
- Wajer Blu: Newtrali (N)
- Green/Yellow Wire: Ground (⍃)
Connect these wires to your household electrical circuit accordingly. Ensure all connections are secure and insulated. It is recommended to use a waterproof junction box for outdoor connections.
Wiring diagram and product dimensions.
5.3 Passi tal-Immuntar
- Immarka l-punti tat-tħaffir fuq il-ħajt jew fuq il-kantuniera billi tuża l-bracket tal-immuntar bħala mudell.
- Drill holes and insert appropriate wall plugs (if necessary).
- Secure the mounting bracket to the surface with screws.
- Connect the electrical wires as described in Section 5.2.
- Attach the floodlight fixture to the mounting bracket and secure it.
- Adjust the angle of the light heads and the motion sensor to cover the desired areas.
Wall and eave mounting options.
6. Operazzjoni
The floodlight features a PIR motion sensor with three adjustable settings: TIME, LUX, and SENS.
Motion sensor adjustment knobs for TIME, LUX, and SENS.
6.1 Adjusting Light Heads
The three light heads can be independently adjusted to direct light where needed:
- The central head can be moved vertically up or down (90°).
- The two side heads can be moved vertically up or down (90°) and rotated horizontally left or right (270°).
6.2 Issettjar tas-Sensor tal-Mozzjoni
Use the three rotary knobs on the motion sensor to configure its behavior:
- ĦIN (Tul tad-Dawl): Adjusts how long the light stays on after motion is detected. The duration can be set from 10 seconds to 7 minutes. Rotate the knob clockwise to increase the duration and counter-clockwise to decrease it.
- LUX (Sensittività għad-Dawl Ambjentali): Jiddetermina l-livell tad-dawl ambjentali li fih is-senser isir attiv.
- Rotate towards the 'sun' symbol for 24-hour operation (day and night).
- Rotate towards the 'moon' symbol for night-only operation (activates only in darkness).
- SENS (Sensittività ta' Sejbien): Adjusts the motion detection distance. Rotate the knob to increase or decrease the detection range, typically from 6 to 12 meters.
Motion sensor detection range (180°) and distance (6-12m).
6.3 Applikazzjoni Eżamples
The floodlight effectively illuminates outdoor areas such as driveways and entrances.
7. Manutenzjoni
- Tindif: Periodically clean the floodlight's surface and sensor lens with a soft, damp drapp. Tużax prodotti tat-tindif jew solventi li joborxu. Kun żgur li l-elettriku jkun mitfi qabel ma tnaddaf.
- Spezzjoni: Regularly check for any signs of damage to the housing, wiring, or mounting. If damage is found, disconnect power and have it inspected by a qualified technician.
- L-ebda Partijiet li jistgħu jservu mill-utent: The LED light source is not replaceable. Do not attempt to open or repair the floodlight yourself.
Robust metal housing with heat sink fins for durability.
Efficient heat dissipation mechanism.
8 Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | No power supply; LUX setting too low; Sensor not detecting motion. | Check power connection; Adjust LUX setting towards 'sun' for testing; Verify sensor is aimed correctly and SENS is adequate. |
| Id-dawl jibqa' mixgħul kontinwament. | Continuous motion detected; LUX setting too high (always 'sun'); Wiring error. | Check for obstructions or constant movement in detection zone; Adjust LUX setting towards 'moon'; Consult an electrician to check wiring. |
| Id-dawl jinxtegħel matul il-ġurnata. | LUX setting too high (towards 'sun'). | Adjust LUX setting towards 'moon' to activate only in darkness. |
| Id-dawl jintefa malajr/bil-mod wisq. | TIME setting incorrect. | Adjust TIME knob to desired duration (10 seconds to 7 minutes). |
| Il-firxa tas-sensorju tal-moviment hija qasira/twila wisq. | SENS setting incorrect. | Adjust SENS knob to increase or decrease detection distance. |
| Teptip ħafif. | Provvista tal-enerġija instabbli; Konnessjoni tal-wajers maħlula. | Check power source stability; Ensure all wiring connections are tight. |
9. Garanzija u Appoġġ
Onforu products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact Onforu customer support.
For technical assistance or inquiries, please contact Onforu customer service through their official websit jew il-bejjiegħ bl-imnut minn fejn inxtara l-prodott.
