Introduzzjoni
The GBC ShredMaster SX20-08 is a high-performance cross-cut paper shredder designed for secure disposal of sensitive documents. It offers a P-4 security level, shredding documents into small 5/32" x 1 1/2" pieces. With a capacity to shred up to 20 sheets at a time and an 8-gallon pull-out bin, it is suitable for home offices and small business environments. Key features include a long 240-minute run time, auto-reverse jam prevention, Whisper Shred Technology for quiet operation, and an Eco Power Save function for energy efficiency.
Informazzjoni Importanti dwar is-Sigurtà
Please read all safety instructions carefully before operating the shredder. Failure to follow these instructions may result in injury or damage to the unit.
- Keep hands, hair, loose clothing, and jewelry away from the paper entry slot.
- Do not insert more than the maximum recommended sheet capacity (20 sheets) at one time.
- Skonnettja t-tqattigħ tal-karti meta ma tkunx qed tużah jew qabel ma tnaddaf, iċċaqlaq, jew tbattal il-kontenitur tal-iskart.
- Tisprejjax aerosols jew lubrikanti fit-tqattigħ.
- This shredder is intended for indoor use only.
- Tħallix tfal jew annimali domestiċi qrib ix-shredder.
- Ħaddem it-tqattigħ fuq wiċċ ċatt u stabbli.
- TWISSIJA: Dan il-prodott jista’ jesponik għal kimiċi inkluż iċ-ċomb, li huwa magħruf mill-Istat ta’ Kalifornja li jikkawża kanċer u difetti fit-twelid jew ħsara riproduttiva oħra. Għal aktar informazzjoni mur fuq www.P65Warnings.ca.gov.
Kontenut tal-Pakkett
Ivverifika li l-oġġetti kollha huma preżenti fil-pakkett:
- GBC ShredMaster SX20-08 Paper Shredder Unit
- Bin tal-iskart
- Manwal ta 'Istruzzjoni (dan id-dokument)
Setup
- Spakkjar: Neħħi l-imballaġġ bir-reqqa tal-magna tat-tqattigħ. Żomm l-imballaġġ għal trasport jew ħażna fil-futur.
- Pjazzament: Position the shredder on a level, stable surface near a standard electrical outlet. Ensure adequate ventilation around the unit.
- Installazzjoni ta' Bin tal-Iskart: Ensure the 8-gallon waste bin is correctly inserted into the shredder cabinet. The shredder will not operate if the bin is not properly seated.
- Konnessjoni tal-Enerġija: Ipplaggja l-korda tad-dawl fi żbokk elettriku ertjat.
Figure 1: GBC ShredMaster SX20-08 ready for setup.
Istruzzjonijiet Operattivi
Operazzjoni Bażika
- Qawwa Mixgħul: Press the power button on the control panel. The shredder will enter standby mode, indicated by an LED light.
- Dokumenti tal-Għalf: Insert paper directly into the paper entry slot. The shredder will automatically detect the paper and begin shredding. Do not exceed the 20-sheet capacity. The shredder can also handle staples and paperclips.
- Ħin ta' Run Kontinwu: The shredder is designed for a 240-minute continuous run time, making it suitable for large shredding tasks. Allow the unit to cool down if it reaches its thermal limit.
- Auto Reverse Jam Prevention: In case of an overload or jam, the shredder features an auto-reverse function to clear the jam. If a jam persists, manually reverse the shredder using the control panel.
- Whisper Shred Technology: This technology ensures quiet operation, maintaining noise levels below 58 dB to minimize disruptions in office environments.
- Eco Power Save: To conserve energy, the shredder will automatically turn off after 2 minutes of inactivity.
Figure 2: Feeding documents into the shredder.
Indikaturi LED
The control panel features LED indicator lights to provide operational status:
- Bin sħiħ: Jixgħel meta l-kontenitur tal-iskart ikun mimli u jeħtieġ li jitbattal.
- Bieb Miftuħ: Indicates that the waste bin is not properly closed or seated. The shredder will not operate until the bin is correctly positioned.
- Saħħan Fuq: Lights up if the shredder has been used continuously for too long and needs to cool down. Allow the unit to rest before resuming operation.
- Tagħbija żejda: Activates if too many sheets are inserted at once, triggering the auto-reverse function.
Figure 3: The 8-gallon pull-out waste bin.
Figure 4: The P-4 security level ensures confidential shredding.
Manutenzjoni
It-tbattil tal-Waste Bin
When the "Bin Full" indicator illuminates, the waste bin needs to be emptied. Simply pull out the bin from the front of the shredder, dispose of the shredded material, and slide the bin back into place until it clicks securely.
Tindif
- Dejjem aqla’ t-tqattigħ qabel ma tnaddaf.
- Imsaħ il-barra tax-shredder b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
- Periodically clean the paper entry area to remove any paper dust or debris.
Żejtjar tat-Tqattigħ
For optimal performance and longevity, it is recommended to oil the shredder blades regularly, especially after emptying the waste bin or after heavy use. Use shredder oil specifically designed for paper shredders. Apply a thin line of oil across the paper entry slot and then run a few sheets of paper through the shredder to distribute the oil.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| It-tqattigħ tal-karti ma jixgħelx. | Bla enerġija; Il-kontenitur tal-iskart mhux imdaħħal sew; Il-protezzjoni kontra s-sħana żejda hija attivata. | Check power cord connection and outlet; Ensure waste bin is fully inserted and "Door Open" indicator is off; Allow shredder to cool down if "Over Heat" indicator is on. |
| Ġamm tal-karta. | Too many sheets inserted; Paper not fed straight. | Utilize the auto-reverse function or manually reverse the shredder; Remove excess paper; Feed paper straight. |
| It-tqattigħ jieqaf waqt l-operazzjoni. | Waste bin full; Overheat protection activated; Bin not properly seated. | Empty waste bin; Allow shredder to cool down; Re-insert waste bin securely. |
| It-tqattigħ huwa storbjuż. | Blades require oiling; Debris in cutting mechanism. | Oil the shredder blades as per maintenance instructions; Unplug and carefully inspect for debris. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Mudell | SX20-08 (1758502) |
| Tip imqatta | Qatgħa maqtugħa |
| Livell ta' Sigurtà | P-4 (5/32" x 1 1/2" particles) |
| Kapaċità tal-folja | Up to 20 sheets (20 lb bond paper) |
| Kapaċità Bin | 8 Galun |
| Run Time | 240 minuta kontinwa |
| Ħin Kessaħ | Not specified, allow adequate time after overheat. |
| Livell ta' Storbju | Below 58 dB (Whisper Shred Technology) |
| Dimensjonijiet (L x W x H) | 26.97 x 18.5 x 14.76 pulzieri |
| Piż tal-oġġett | 0.01 uqija (Note: The provided weight of 0.01 ounces may be a data entry error. Actual weight is typically much higher for a shredder of this capacity.) |
| Ritiri | Paper, staples, paperclips |
Garanzija u Appoġġ
GBC products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official GBC websit.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact GBC Customer Service. Contact information can typically be found on the GBC webis-sit jew fuq l-imballaġġ tal-prodott tiegħek.
You can also visit the official GBC Store on Amazon for more product information and support: GBC Store
