Scheppach DP16VLS Pillar Drill Instruction Manual

1. Introduzzjoni

This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your Scheppach DP16VLS Pillar Drill. Please read these instructions carefully before using the machine to ensure proper function and to prevent injury or damage.

Image 1: Scheppach DP16VLS Pillar Drill with included vice.

2. Istruzzjonijiet tas-Sigurtà

Always observe general safety regulations when working with power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

Twissijiet ta' Sigurtà Ġenerali:

• Sigurtà taż-Żona tax-Xogħol: Żomm iż-żona tax-xogħol nadifa u mdawwla sew. Żoni imbarazzati jew mudlama jistiednu inċidenti. Tħaddimx għodod tal-enerġija f'atmosferi splussivi, bħal fil-preżenza ta' likwidi, gassijiet jew trab fjammabbli.
• Sigurtà Elettrika: Il-plakek tal-għodda tal-enerġija għandhom jaqblu mas-sokit. Qatt ma timmodifika l-plakka bl-ebda mod. Evita kuntatt tal-ġisem ma' uċuħ ertjati jew imqabbdin mal-art.
• Sigurtà Personali: Always wear eye protection. Use hearing protection when operating the drill. Wear appropriate clothing; avoid loose clothing or jewelry that can get caught in moving parts. Secure long hair.
• Użu u Kura tal-Għodda: Tisforzax l-għodda tal-enerġija. Uża l-għodda tal-enerġija korretta għall-applikazzjoni tiegħek. Skonnettja l-plagg mis-sors tal-enerġija qabel ma tagħmel xi aġġustamenti, tibdel l-aċċessorji, jew taħżen l-għodda tal-enerġija.

Specific Pillar Drill Safety:

• Always secure the workpiece firmly to the drill table using the included vice or clamps. Qatt m'għandek iżżomm il-biċċa tax-xogħol bl-idejn.
• Ensure the drill bit is correctly installed and tightened in the chuck before operation.
• Adjust the drilling depth stop to prevent drilling into the drill table.
• Keep hands clear of the rotating drill bit and all moving parts.
• Allow the motor to reach full speed before beginning to drill.
• Do not attempt to clear chips or debris while the drill is operating.

3. Prodott Aktarview u Karatteristiċi

The Scheppach DP16VLS is a robust pillar drill designed for precise drilling in various materials including wood, metal, aluminum, and plastic. It features a powerful 500W motor and a variable speed system.

Karatteristiċi ewlenin:

• Mutur: Powerful 500 Watt motor.
• Veloċità: 5 adjustable speeds ranging from 600 to 2650 revolutions per minute (rpm).
• Chuck: Keyed chuck with a capacity of 1.5 to 13 mm.
• Fond tat-tħaffir: Maximum drilling stroke of 50 mm.
• Tabella tax-Xogħol: Robust steel structure, height-adjustable, and inclinable up to 45 degrees.
• Viċi: Includes a vice with a maximum clamping capacity of 62 mm.
• Laser: Integrated positioning laser for precise drilling point alignment.
• Outreach: 105 mm outreach from the column to the chuck center.

Image 2: Diagram illustrating ergonomic handle, precision laser, variable speed, and belt drive.

Image 3: Diagram illustrating adjustable drilling table, chuck capacity, heavy base, and 500W motor.

4. Assemblea

The Scheppach DP16VLS Pillar Drill is typically supplied partially disassembled. Follow these general steps for assembly. Refer to the detailed assembly diagrams in your product packaging for specific instructions.

1. Base and Column Assembly: Secure the main column to the stable base using the provided fasteners. Ensure all connections are tight.
2. Assemblaġġ tal-Mejda: Attach the work table to the column, ensuring it can be adjusted vertically and rotated freely.
3. Drill Head Assembly: Mount the drill head assembly onto the top of the column. Connect any necessary electrical components as per the wiring diagram.
4. Chuck Installation: Install the drill chuck onto the spindle. Ensure it is seated correctly and securely.
5. Handle and Vice: Attach the feed handles and the included vice to the work table.
6. Installazzjoni taċ-ċinturin: If not pre-installed, install the drive belt between the motor and spindle pulleys. Adjust belt tension as needed (refer to Maintenance section).

Important: Before first use, verify all fasteners are securely tightened and all components are correctly aligned.

5. Istruzzjonijiet Operattivi

5.1 Preparing for Drilling

• Agħżel il-Biċċa tat-Trapan: Choose the appropriate drill bit for the material and hole size. Insert it into the chuck and tighten securely with the chuck key.
• Aġġusta Veloċità: Open the belt cover and adjust the belt position on the pulleys to select the desired speed. Higher speeds are generally for smaller bits and softer materials, while lower speeds are for larger bits and harder materials. Close the belt cover before operation.
• Adjust Work Table: Loosen the table lock and adjust the work table height and angle as required for your workpiece. Re-tighten the lock securely. The table can be tilted from +45° to -45°.
• Biċċa tax-Xogħol Sikura: Place the workpiece on the table and secure it firmly using the included vice or clamps. Ensure it cannot shift during drilling.
• Set Drilling Depth: Use the depth stop mechanism to set the desired drilling depth. This prevents drilling too deep.
• Attiva l-Laser: Turn on the integrated laser guide to precisely align the drilling point.

Image 4: User drilling into a wooden beam, demonstrating proper workpiece securing.

Image 5: User drilling into a metal workpiece secured by the included vice.

Image 6: Close-up of the depth scale and laser guide for precise control.

5.2 Proċedura tat-Tħaffir

1. Kun żgur li jiġu segwiti l-prekawzjonijiet kollha tas-sigurtà.
2. Turn on the drill using the power switch. Allow the motor to reach its operating speed.
3. Bil-mod niżżel il-bit tat-trapan fil-biċċa tax-xogħol billi tuża l-mankijiet tal-għalf. Applika pressjoni kostanti u uniformi.
4. Do not force the drill. If the motor slows significantly, reduce feed pressure.
5. Periodically retract the drill bit to clear chips, especially when drilling deep holes in metal.
6. Once the desired depth is reached, retract the drill bit completely from the workpiece.
7. Turn off the drill and wait for the chuck and drill bit to stop rotating before removing the workpiece or making adjustments.

6. Manutenzjoni

Regular maintenance ensures the longevity and safe operation of your pillar drill.

• Tindif: After each use, clean the machine of dust, chips, and debris. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
• Lubrikazzjoni: Periodically lubricate moving parts such as the column, spindle, and feed mechanism with light machine oil.
• Tensjoni taċ-ċinturin: Check the drive belt tension regularly. A properly tensioned belt should have slight give when pressed. Adjust if too loose or too tight to prevent slippage or excessive wear.
• Manutenzjoni taċ-Ċokk: Keep the chuck jaws clean and free of debris. Lubricate the chuck mechanism occasionally.
• Spezzjoni Elettrika: Regularly inspect the power cord and plug for damage. If damaged, have it replaced by a qualified technician.

7 Issolvi l-problemi

This section addresses common issues you might encounter with your Scheppach DP16VLS Pillar Drill.

8. Speċifikazzjonijiet

Technical data for the Scheppach DP16VLS Pillar Drill.

• Numru tal-Mudell: DP16VLS
• Manifattur: Scheppach
• Kodiċi tal-Artikolu: SCH5906810901
• Dimensjonijiet tal-Prodott: 43.5 x 22 x 60 ċm
• Piż tal-oġġett: 14 kg
• Materjal: Azzar
• Kulur: Blu
• Temm: Finitura tleqq
• Sors tal-Enerġija: Corded Elettriku
• Voltage: 230 Volt
• Wattage: 500 Watt
• Ampetà: 16 Ampere
• Kapaċità taċ-ċokk: 1.5 - 13 mm
• Max Drilling Depth: 50 mm
• Veloċitajiet: 5 (600-2650 rpm)
• Veloċità Max ta' Rotazzjoni: 2650 rpm
• Livell tal-ħoss: 84 Deċibel
• Tul tal-Cable: 2000 mm
• Max Distance Chuck to Table: 170 mm
• Max Distance Chuck to Base: 250 mm
• Mejjel Tabella: -45° sa +45°
• Komponenti Inklużi: Pillar Drill, Vice

Image 7: Diagram illustrating the 50 mm drilling depth capacity.

Image 8: Diagram showing suitable materials for drilling: wood, steel, metal, aluminum, plastic.

Image 9: Close-up of drill head showing 105 mm outreach from column to chuck center.

9. Garanzija u Appoġġ

For warranty information, please refer to the documentation included with your purchase or contact Scheppach customer service directly. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach websit għad-dettalji tal-kuntatt.