Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge Instruction Manual

1. Prodott Aktarview

The Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge (Model 69ELF114TWG) is designed to reduce incoming water pressure to a safe and consistent level for residential and commercial plumbing systems. This unit features a compact design, lead-free bronze construction, and an integrated internal bypass mechanism. It includes a color-coded gauge for easy pressure monitoring and adjustment.

Figure 1: Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator with Gauge. This image shows the regulator with its integrated pressure gauge and yellow adjustment handle.

2. Informazzjoni dwar is-Sigurtà

• Dejjem agħlaq il-provvista prinċipali tal-ilma qabel tibda kwalunkwe installazzjoni jew manutenzjoni.
• Ilbes tagħmir protettiv personali (PPE) xieraq, bħal nuċċalijiet u ingwanti tas-sigurtà.
• Kun żgur li l-konnessjonijiet kollha huma ssiġillati sew biex tevita t-tnixxijiet.
• Consult local plumbing codes and regulations for proper installation procedures.
• Jekk m'intix ċert dwar xi parti tal-installazzjoni, ikkonsulta plamer kwalifikat.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

• 1x Apollo 3/4" Bronze Double Union Threaded Water Pressure Regulator
• 1x Integrated Pressure Gauge

4. Installazzjoni

This regulator features a double union PEX-A (cold expansion) barb design for simplified installation in PEX-A piping systems. Ensure the regulator is installed in the correct flow direction, indicated by an arrow on the body.

1. Ipprepara s-sit tal-installazzjoni: Turn off the main water supply. Drain the water lines to relieve pressure. Select a suitable location for the regulator, typically after the main shut-off valve and before any branch lines.
2. Cut and Prepare PEX-A Piping: Cut the PEX-A pipe to the required length, ensuring clean, square cuts. Prepare the pipe ends for cold expansion connections according to PEX-A system manufacturer guidelines.
3. Qabbad ir-Regolatur:
   • Apply appropriate thread sealant (e.g., Teflon tape or pipe dope) to the male threads of the PEX-A fittings.
   • Thread the PEX-A fittings onto the double union ends of the regulator. Ensure the flow arrow on the regulator body points in the direction of water flow into the building.
   • Tighten the union nuts securely, but do not overtighten.
   • Perform cold expansion connections on the PEX-A pipe ends to the fittings according to PEX-A system manufacturer instructions.
4. Installa Gauge tal-Pressjoni: The pressure gauge is typically pre-installed. Ensure it is securely threaded into the designated port on the regulator body.
5. Restore Water Supply and Check for Leaks: Slowly turn on the main water supply. Carefully inspect all connections for any signs of leaks. Tighten connections as necessary.

Figura 2: Ġenb view of the Apollo Water Pressure Regulator, showing the double union PEX-A connections and the flow direction arrow. Note the "MAX INLET 400 PSI" marking.

5. Istruzzjonijiet Operattivi

The regulator is factory-set at 50 psi and is adjustable from 15 psi to 75 psi. No special tools are required for adjustment.

1. Iċċekkja l-Pressjoni Kurrenti: Observe the reading on the integrated pressure gauge. The gauge is color-coded to indicate pressure ranges (e.g., Low, Optimal, Excessive).
2. Aġġusta tal-Pressjoni:
   • Biex żieda pressure: Turn the yellow adjustment handle lejn l-arloġġ.
   • Biex tnaqqis pressure: Turn the yellow adjustment handle lejn il-lemin.
   • Make small adjustments and allow the system pressure to stabilize before re-checking the gauge.
3. Ikkonferma l-issettjar: Once the desired pressure is achieved (typically between 50-60 psi for most residential applications), confirm the reading on the gauge.

Figura 3: Close-up view of the Apollo Water Pressure Regulator, highlighting the pressure gauge with its color-coded optimal range and the yellow adjustment handle.

6. Manutenzjoni

The Apollo Water Pressure Regulator is designed for minimal maintenance. Regular checks can help ensure optimal performance.

• Periodic Pressure Check: Periodically check the pressure gauge to ensure the system pressure remains at the desired setting. Fluctuations may indicate a need for adjustment or inspection.
• Spezzjoni tat-tnixxija: Annually inspect the regulator and connections for any signs of leaks or corrosion.
• Tindif: Clean the exterior of the regulator with a damp cloth as needed. Do not use harsh chemicals.
• Sediment Filter (Optional): If your water supply contains significant sediment, consider installing a sediment filter upstream of the pressure regulator to prevent internal clogging.

7 Issolvi l-problemi

8. Speċifikazzjonijiet

• Mudell: 69ELF114TWG
• Materjal: Bronż
• Daqs tal-Konnessjoni tad-Dħul: 3/4 Pulzier
• Tip ta' Konnessjoni tad-Dħul: Cross Linked Polyethylene (PEX-A)
• Tip ta' Konnessjoni tal-Ħut: PEX
• Pressjoni Operattiva Massima: 400 PSI (Inlet)
• Firxa ta' Pressjoni Aġġustabbli: 15 - 75 PSI (Factory-set at 50 PSI)
• Dimensjonijiet tal-oġġett (L x W x H): 2.13 x 7 x 8 pulzieri
• Piż tal-oġġett: 2.53 liri
• Ċertifikazzjonijiet: Certified to ASSE 1003 and CSA B356, listed by ASSE and IAPMO (cUPC)
• Karatteristiċi Speċjali: Integrated internal bypass mechanism, Color-coded gauge

9. Garanzija u Appoġġ

This Apollo Water Pressure Regulator comes with a manufacturer's warranty. For specific warranty details, please refer to the documentation included with your purchase or contact Apollo customer support.

For technical support or inquiries, please visit the official Apollo websit jew ikkuntattja lid-dipartiment tas-servizz tal-konsumatur tagħhom.