1. Prodott Aktarview
The myCharge HubMax HBLC10V is a portable power bank designed to charge various mobile devices. It features an internal 10050mAh battery, built-in Lightning and USB-C cables, and an integrated foldable wall plug for convenient recharging.
Image 1.1: The myCharge HubMax HBLC10V portable charger, showcasing its compact design with integrated Lightning and USB-C cables, and a foldable wall plug.
2. Kontenut tal-Pakkett
- myCharge HubMax HBLC10V Portable Charger
- Kejbil tas-Sajjetti Integrat
- Kejbil USB-C integrat
- Integrated Wall Plug
3. Is-Setup u l-Iċċarġjar Inizjali
Before first use, it is recommended to fully charge your myCharge HubMax HBLC10V.
- Locate the Wall Plug: Extend the foldable wall prongs located on the side of the device.
- Qabbad mal-Enerġija: Plug the device directly into a standard AC wall outlet.
- Iċċarġjar tal-Monitorja: The LED indicator lights on the device will illuminate to show the charging status. A full charge typically takes approximately 4.6 hours. All indicator lights will be solid when fully charged.
Image 3.1: The myCharge HubMax HBLC10V connected to a wall outlet for recharging, illustrating its integrated wall plug and multiple charging outputs.
4. Istruzzjonijiet Operattivi
The myCharge HubMax HBLC10V allows you to charge up to three devices simultaneously.
4.1 Charging Devices with Built-in Cables
- Identifika l-Kejbil: Select the appropriate built-in cable for your device (Lightning for Apple devices, USB-C for compatible Android and other devices).
- Qabbad Apparat: Plug the selected cable directly into your mobile device's charging port.
- Ibda l-Iċċarġjar: The myCharge HubMax will automatically begin charging your device. The LED indicator lights will show the remaining battery level of the power bank.
4.2 Charging a Third Device via USB-A Port
For devices requiring a standard USB-A connection, use the integrated USB-A port.
- Connect Your Cable: Plug your device's USB-A charging cable (not included) into the USB-A port on the myCharge HubMax.
- Qabbad Apparat: Plug the other end of your cable into your mobile device.
- Ibda l-Iċċarġjar: L-iċċarġjar jibda awtomatikament.
Immaġni 4.1: Stampa dettaljata view of the myCharge HubMax HBLC10V, emphasizing its all-in-one design with built-in wall prongs, Lightning and USB-C cables, and an additional USB-A port for charging up to three devices.
4.3 Kapaċitajiet ta' Iċċarġjar Mgħaġġel
The HubMax supports Power Delivery and Quick Charge 3.0 via its USB-C cable, enabling faster charging for compatible devices. This can charge devices up to 2.4 times faster than standard chargers.
Image 4.2: The myCharge HubMax HBLC10V demonstrating its 12W high-speed charging capability, capable of charging a device from 0% to 50% in under 30 minutes.
5. Manutenzjoni u Kura
- Ħażna: Aħżen il-power bank f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Tindif: Uża drapp ratba u niexfa biex tnaddaf in-naħa ta 'barra tal-apparat. Evita li tuża kimiċi ħarxa jew materjali li joborxu.
- Immaniġġjar: Handle the device with care. Avoid dropping it or subjecting it to strong impacts, as this can damage internal components and shorten its lifespan.
- Ħajja tal-batterija: For optimal battery health, avoid completely draining the power bank frequently. Recharge it when the battery level is low.
6 Issolvi l-problemi
If you encounter issues with your myCharge HubMax HBLC10V, refer to the following common solutions:
- Apparat Mhux Iċċarġja:
- Ensure the myCharge HubMax itself is sufficiently charged. Check the LED indicators.
- Verify that the built-in cable or your external USB-A cable is securely connected to both the power bank and your device.
- Try a different device or cable to rule out issues with the connected device or cable.
- Iċċarġjar bil-mod:
- Ensure your device supports fast charging protocols (Power Delivery, Quick Charge 3.0) to benefit from the HubMax's fast charging capabilities.
- L-iċċarġjar ta' diversi apparati simultanjament jista' jnaqqas il-veloċità tal-iċċarġjar għal apparati individwali.
- Iċċekkja jekk il-kejbil tal-iċċarġjar huwiex bil-ħsara.
- Power Bank Not Recharging:
- Ensure the wall plug is fully extended and securely inserted into a working AC wall outlet.
- Ipprova sokit tal-ħajt differenti.
If problems persist, please contact myCharge customer support for further assistance.
7. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | HBLC10V |
| Kapaċità tal-batterija | 10050 mAh (Ion tal-litju) |
| Dimensjonijiet tal-Prodott | 2.8 x 0.9 x 4.6 pulzieri |
| Piż tal-oġġett | 10.2 uqija |
| Kejbils Inkorporati | Sajjetti, USB-C |
| Additional Port | USB-A |
| Ħin ta 'Iċċarġjar | Approx. 4.6 hours (via integrated wall plug) |
| Karatteristiċi Speċjali | Integrated Wall Plug, Fast Charging (PD, QC 3.0) |
| Manifattur | myCharge |
8. Garanzija u Appoġġ
myCharge products are typically covered by a manufacturer's warranty. For specific warranty details, registration, or to initiate a warranty claim, please refer to the official myCharge webis-sit jew ikkuntattja direttament lis-servizz tal-klijenti tagħhom.
For technical assistance, troubleshooting not covered in this manual, or general inquiries, please visit the myCharge support page or contact their customer service department.
Note: Warranty terms and support availability may vary. Always refer to the latest information provided by the manufacturer.
