Beghelli 19432 LED Emergency Lamp Manwal għall-Utent

Introduzzjoni

This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.

The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.

Informazzjoni dwar is-Sigurtà

Dejjem segwi l-linji gwida tas-sigurtà li ġejjin biex tevita xokk elettriku, nar, jew korriment:

• Kun żgur li l-provvista tal-enerġija hija skonnettjata qabel l-installazzjoni jew il-manutenzjoni.
• L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet elettriċi lokali.
• Tesponix l-lamp għal umdità eċċessiva jew temperaturi estremi.
• Tippruvax tiftaħ jew timmodifika l-lamp housing, as this may void the warranty and pose a safety risk.
• Żomm il-materjali tal-ippakkjar 'il bogħod mit-tfal.

Kontenut tal-Pakkett

Ivverifika li l-komponenti kollha huma preżenti u mhux imħassra:

• Beghelli 19432 LED Emergency Lamp unità
• Integrated Li-Fe Battery
• Aċċessorji tal-immuntar (viti, tappijiet tal-ħajt)
• Manwal għall-Utent (dan id-dokument)

Setup u Installazzjoni

The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:

1. Agħżel Post: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
2. Ipprepara l-Wiċċ tal-Immuntar: Ensure the wall surface is clean, dry, and capable of supporting the lampil-piż ta'.
3. Immarka l-Punti tat-Tħaffir: Uża l-lamp's mounting holes as a template to mark the drilling points on the wall.
4. Drill toqob: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
5. Daħħal il-Plakkijiet tal-Ħajt: Daħħal il-plaggs tal-ħajt ipprovduti fit-toqob imtaqqbin.
6. Immonta l-Lamp: Sikura l-lamp to the wall using the provided screws. Ensure it is firmly attached.
7. Qabbad l-Enerġija: Qabbad il-lamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
8. Ħlas Inizjali: After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.

Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.

Istruzzjonijiet Operattivi

The Beghelli 19432 operates automatically:

• Operazzjoni normali: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
• Mod ta' Emerġenza: Fil-każ ta' qtugħ tad-dawl, l-lamp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
• Ritorn għan-Normal: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
• Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)

Manutenzjoni

Regular maintenance ensures the longevity and reliability of your emergency lamp:

• Tindif: Naddaf il-lampNaddaf il-barra b'ċarruta ratba u niexfa. Tużax prodotti tat-tindif jew solventi li joborxu.
• Iċċekkja tal-batterija: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
• Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
• Sostituzzjoni tal-batterija: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
• Lamp Sostituzzjoni: The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.

Issolvi l-problemi

Irreferi għat-tabella t'hawn taħt għal kwistjonijiet komuni u s-soluzzjonijiet tagħhom:

Jekk tiltaqa' ma' problemi li mhumiex elenkati hawn jew jekk is-soluzzjonijiet issuġġeriti ma jsolvux il-problema, jekk jogħġbok ikkuntattja lis-servizz tal-konsumatur ta' Beghelli.

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.

For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli webis-sit jew fuq l-imballaġġ tal-prodott.

Informazzjoni dwar ir-riċiklaġġ: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.