Manwal tal-Istruzzjonijiet ta' Victron Energy Smart Battery Sense (Mudell SBS050150200)

Prodott Overview

The Victron Energy Smart Battery Sense is a wireless battery voltage and temperature sensor designed for use with Victron Energy MPPT Solar Chargers. This device enhances battery charging efficiency and extends battery life by providing accurate voltage and temperature data directly from the battery terminals.

Il-karatteristiċi ewlenin jinkludu:

• Wireless connectivity via VE.Smart Network (Bluetooth Smart).
• Improved charging efficiency and prolonged battery life through precise voltage u sensing tat-temperatura.
• Simultaneous data transmission to multiple compatible Solar Chargers (12V, 24V, 48V battery banks).
• Simple, quick, and tidy installation with eyelets for battery terminals and a self-adhesive strip for mounting.

Image: The Victron Energy Smart Battery Sense unit, a compact blue device with red and black wires for battery connection.

Setup u Installazzjoni

1. Ipprepara l-batterija: Kun żgur li t-terminali tal-batterija huma nodfa u ħielsa mill-korrużjoni.
2. Qabbad mal-Batterija: Attach the unit's two eyelets to your battery terminals. The red wire connects to the positive (+) terminal, and the black wire connects to the negative (-) terminal.
3. Immonta l-Unità: Use the self-adhesive strip on the back of the Smart Battery Sense unit to attach it directly onto the battery body. This ensures accurate temperature measurement.
4. Qawwa Mixgħul: Once connected, the blue LED on the Smart Battery Sense will start blinking, indicating it is powered up and ready for connection via Bluetooth.

Image: The Smart Battery Sense unit connected to a battery, showing the red and black wires attached to the terminals.

Image: A diagram illustrating the compact dimensions of the Smart Battery Sense unit (38mm x 14mm x 38mm).

Operating the Smart Battery Sense

The Smart Battery Sense operates wirelessly using the VE.Smart Network, a Bluetooth Smart-based technology. Data is transmitted to compatible Victron Energy MPPT Solar Chargers to optimize charging parameters.

VictronConnect App Connectivity

To set up and monitor the Smart Battery Sense, use the VictronConnect app, available for both Android and iOS devices. This app allows you to create and join VE.Smart Networks.

1. Niżżel l-App: Fittex għal "VictronConnect" in your device's app store and download it.
2. Ippermetti Bluetooth: Kun żgur li l-Bluetooth huwa attivat fuq l-ismartphone jew it-tablet tiegħek.
3. Open VictronConnect: Launch the app. It will scan for Victron products.
4. Connect to Smart Battery Sense: Select "Smart Battery Sense" from the discovered devices.
5. Create VE.Smart Network: In the Smart Battery Sense settings, navigate to "VE.Smart Networking" and select "Create Network." Give your network a name.
6. Join Network with MPPT Charger: Go back to the main menu, select your MPPT Solar Charger, go to its settings, then "VE.Smart Networking," and select "Join Existing." Choose the network you just created.

Once connected, the MPPT charger will receive accurate battery voltage and temperature data from the Smart Battery Sense, allowing it to adjust charging parameters for optimal performance.

Image: A smartphone screen showing the VictronConnect app interface with battery voltage and temperature readings from the Smart Battery Sense.

Vidjows Uffiċjali tal-Prodott

Manutenzjoni

The Victron Energy Smart Battery Sense is designed for minimal maintenance. Periodically check the connections to the battery terminals to ensure they are secure and free from corrosion. Keep the unit clean and dry.

For optimal performance, ensure the VictronConnect app and the device firmware are updated to the latest versions.

Issolvi l-problemi

• Ebda Konnessjoni Bluetooth:
  • Kun żgur li l-Bluetooth huwa attivat fuq it-tagħmir mobbli tiegħek.
  • Verify the Smart Battery Sense is correctly wired to the battery terminals (red to positive, black to negative).
  • Check if the blue LED on the unit is blinking. If not, recheck wiring.
  • Ensure your mobile device is within Bluetooth range (up to 10m).
• Qari Skorrett:
  • Confirm the unit is securely mounted directly onto the battery for accurate temperature sensing.
  • Verify battery terminal connections are clean and tight.
• VE.Smart Network Issues:
  • Ensure both the Smart Battery Sense and the MPPT Solar Charger are configured to the same VE.Smart Network within the VictronConnect app.
  • Smart Battery Sense is not needed, or allowed, in systems which are already controlled by a Color Control GX or Venus GX.
  • Smart Battery Sense mhuwiex meħtieġ għal installazzjonijiet li diġà għandhom BMV-712 (monitor tal-batterija) b'aċċessorju tas-sensorju tat-temperatura.

Speċifikazzjonijiet

Garanzija

This product is covered by a manufacturer's warranty. For detailed information regarding the warranty period and terms, please refer to the official Victron Energy warranty documentation included with your product or visit the Victron Energy websit.

Appoġġ

For technical assistance, troubleshooting, or further inquiries, please contact your authorized Victron Energy dealer or visit the official Victron Energy support website. You can also find additional resources and FAQs on their websit.

Żur il- Victron Energy Store għal aktar prodotti u informazzjoni.