1. Introduzzjoni
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your FABER 2740 SRM 60cm under-cabinet cooker hood. Please read these instructions carefully before using the appliance and retain them for future reference.
2. Informazzjoni dwar is-Sigurtà
- Ensure the electrical installation complies with local safety regulations.
- Tħallix lit-tfal iħaddmu l-apparat.
- Naddaf il-filtri tal-grass regolarment biex tevita perikli tan-nar.
- Tqabbadx taħt il-barnuża tal-cooker.
- Ensure adequate ventilation when the hood is used simultaneously with gas or other fuel-burning appliances.
- Skonnettja l-apparat mill-provvista tal-enerġija qabel kull tindif jew manutenzjoni.
3. Prodott Aktarview
The FABER 2740 SRM is a 60cm under-cabinet cooker hood designed for integration into kitchen cabinets. It features 3W LED lighting for illuminating the cooking area and offers three adjustable suction power levels.
Figure 1: FABER 2740 SRM cooker hood installed under a kitchen cabinet, showcasinid-disinn integrat tiegħu.
4. Installazzjoni
The cooker hood can be installed in two modes: ducted (external extraction) or recirculating (internal filtration).
4.1 Immuntar
Refer to the provided technical diagram for precise measurements and mounting points. The hood is designed for under-cabinet installation.
Figure 2: Technical drawing with dimensions for FABER 2740 SRM cooker hood installation. Ensure cabinet and ducting clearances are met.
4.2 Ducted Mode (External Extraction)
In ducted mode, cooking fumes are expelled outside the home through an exhaust duct (not included). Ensure the ducting is correctly sized and sealed to maximize efficiency.
Figure 3: Diagram showing ducted extraction mode, where air is vented outside.
4.3 Recirculating Mode (Internal Filtration)
If external air evacuation is not possible, the hood can operate in recirculating mode. This requires the installation of activated carbon filters (not included) to purify cooking odors before releasing clean air back into the kitchen environment.
Figure 4: Diagram showing recirculating filtration mode, where air is filtered and returned to the kitchen.
5. Istruzzjonijiet Operattivi
The FABER 2740 SRM features push-button controls for managing suction speed and lighting.
5.1 Kontrolli
The control panel typically consists of buttons for:
- Qawwa ON/OFF: Activates or deactivates the hood.
- Għażla tal-Veloċità: Adjusts the motor speed (Level 1, 2, or 3).
- Dawl mixgħul/mitfi: Controls the LED lighting.
5.2 Settings tal-Veloċità
Select the appropriate speed level based on the intensity of cooking fumes:
- Livell 1: For light cooking, simmering.
- Livell 2: For normal cooking, moderate fumes.
- Livell 3: Għal tisjir tqil, qali, jew irwejjaħ qawwija.
5.3 Dawl
Press the light button to turn the 3W LED lighting on or off, providing illumination for your cooking surface.
6. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-kappa tal-cooker tiegħek.
6.1 Metal Anti-Grease Filters
The hood includes metal anti-grease filters designed to capture cooking grease. These filters should be cleaned approximately once a month, depending on usage. They are easy to remove and are dishwasher-safe.
Figure 5: Metal anti-grease filters. These should be cleaned regularly.
6.2 Activated Carbon Filters (Optional)
For recirculating mode, activated carbon filters (not included) are required to remove odors. These filters cannot be washed and must be replaced approximately every 3 months, or more frequently with heavy use. Use only original FABER filters to ensure compatibility and performance.
Figure 6: Activated carbon filters. These are essential for odor removal in recirculating mode.
7 Issolvi l-problemi
Jekk tiltaqa' ma' problemi bil-kappa tal-cooker tiegħek, irreferi għall-problemi u s-soluzzjonijiet komuni li ġejjin:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Il-kappa ma tixgħelx | No power supply; Power cord disconnected; Fuse blown. | Check power connection; Check circuit breaker/fuse box. |
| Qawwa baxxa ta 'ġbid | Grease filters clogged; Activated carbon filters saturated (recirculating mode); Ducting obstructed or too long/narrow. | Clean grease filters; Replace activated carbon filters; Check ducting for obstructions. |
| Storbju eċċessiv | Loose components; Incorrect installation; Obstruction in fan. | Check for loose screws; Ensure correct installation; Inspect fan for foreign objects. |
| Id-dwal ma jaħdmux | Bulb faulty; Electrical connection issue. | Replace LED bulb (if replaceable); Check electrical connections. |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, ikkuntattja persunal tas-servizz kwalifikat.
8. Speċifikazzjonijiet
Technical details for the FABER 2740 SRM cooker hood:
- Numru tal-Mudell: 300.0557.576
- Dimensjonijiet (L x W x H): 59.8 x 48.6 x 15 ċm
- Piż: 8.6 Kilogrammi
- Materjal: Liga tal-Azzar
- Tip ta 'Immuntar: Under-cabinet
- Tip ta' Kontroll: Imbotta Buttuna
- Tip ta 'ventilazzjoni: Ducted or Recirculating
- Kapaċità tal-fluss tal-arja: 380 Cubic meters per hour
- Livell ta' Storbju: 70 Deċibel (massimu)
- Tip ta' Sors tad-Dawl: LED (3W)
- Klassi tal-Effiċjenza tal-Enerġija: D
- Tip ta' filtru: Metal Anti-Grease (included), Activated Carbon (compatible, not included)
Figure 7: Energy efficiency label for the FABER 2740 SRM cooker hood.
9. Garanzija u Appoġġ
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or spare parts, please contact FABER customer service or visit the official FABER websit.
Ensure to have your model number (2740 SRM or 300.0557.576) and purchase date available when contacting support.
