PAC APH-CH01 Speaker Connection Harness Instruction Manual

1. Introduzzjoni

The PAC APH-CH01 is an 18-inch speaker connection harness designed to simplify the integration of aftermarket audio components into select Chrysler and Dodge vehicles equipped with factory amplified sound systems. This harness provides a direct connection to the vehicle's existing speaker wiring, eliminating the need for cutting or splicing factory wires. It is intended for use in custom audio installations where the factory amplifier is being bypassed or replaced, allowing for a clean and reversible installation.

2. Informazzjoni dwar is-Sigurtà

Dejjem skonnettja t-terminal negattiv tal-batterija tal-vettura qabel tibda kwalunkwe installazzjoni elettrika biex tevita short circuits u ħsara.
Kun żgur li l-konnessjonijiet kollha huma siguri u iżolati sew biex tevita xorts elettriċi.
Consult your vehicle's service manual for specific wiring diagrams and component locations.
Jekk m'intix ċert dwar xi pass tal-proċess tal-installazzjoni, fittex l-għajnuna ta' installatur professjonali kwalifikat.
Do not modify the harness. Any modifications may void the warranty and could lead to improper function or damage.

3. Kontenut tal-Pakkett

Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni:

PAC APH-CH01 Speaker Connection Harness (1 unit)
Manwal ta 'Istruzzjoni (dan id-dokument)

Figure 1: The PAC APH-CH01 Speaker Connection Harness. This image displays the multi-connector harness with various wire bundles and connectors, designed for vehicle speaker integration.

4. Gwida għall-Installazzjoni

This harness is designed to connect to the factory speaker wiring at the location of the factory amplifier. The specific location of the factory amplifier varies by vehicle model and year. Refer to your vehicle's service manual for precise amplifier location and removal instructions.

4.1 Preparazzjoni

Ipparkja l-vettura fuq wiċċ ċatt u daħħal il-brejk tal-ipparkjar.
Disconnect the negative battery terminal to prevent electrical hazards.
Locate and access the factory amplifier. This may require removing trim panels or seats.
Carefully disconnect the factory wiring harnesses from the ampaktar ħaj.

4.2 Konnessjoni tal-Arness

The APH-CH01 harness features multiple connectors. Identify the connectors that match the factory speaker output harnesses previously disconnected from the amplifier. The harness is typically used in two main scenarios:

Bypassing the Factory Ampaktar ħaj: If you are removing the factory amplifier and installing an aftermarket amplifier, the APH-CH01 connects to the vehicle's speaker wiring. The loose wires on the harness will then connect to the speaker outputs of your aftermarket ampaktar ħaj.
Integrating with Aftermarket Line Output Converters (LOCs): If you are retaining the factory head unit and adding an aftermarket amplifier via an LOC, the APH-CH01 can provide a clean signal source from the factory speaker wires to the LOC.

Connect the appropriate end of the APH-CH01 harness to the vehicle's factory speaker wiring connectors. Ensure a firm and secure connection.

4.3 Wiring Identification (General Guidelines)

While specific wire colors can vary, the APH-CH01 typically follows standard aftermarket wiring color codes for speaker connections. It is highly recommended to verify continuity with a multimeter or tone generator before making final connections, especially if your vehicle's factory wiring colors do not match standard conventions.

Common Speaker Wire Color Codes
Post tal-Kelliem	Pożittiv (+)	Negattiv (-)
Quddiem Xellug	Abjad	Abjad/Iswed
Quddiem Lemin	Griż	Griż/Iswed
Wara Xellug	Aħdar	Aħdar/Iswed
Wara Dritt	Vjola	Vjola / Iswed

Connect the corresponding wires from the APH-CH01 harness to your aftermarket amplifier's speaker outputs or line output converter inputs. Ensure correct polarity (positive to positive, negative to negative) for optimal sound quality.

4.4 Pass Finali

Secure all wiring to prevent rattles or damage from moving parts.
Reinstall any removed trim panels or components.
Erġa' qabbad it-terminal negattiv tal-batterija tal-vettura.
Test the audio system to ensure all speakers are functioning correctly and with proper balance.

5 Issolvi l-problemi

L-ebda ħoss mill-ispikers:
- Verify all connections to the APH-CH01 harness and aftermarket components are secure.
- Check the aftermarket amplifier's power, ground, and remote turn-on connections.
- Ensure the aftermarket amplifier is powered on and not in protect mode.
- Confirm correct speaker wire polarity.
Ħoss Mgħawġ:
- Check for incorrect wiring polarity.
- Tiżgura ampIs-settings tal-qligħ tal-lifier mhumiex għoljin wisq, u dan jikkawża qtugħ.
- Verify speaker impedance compatibility with the ampaktar ħaj.
Only Some Speakers Working:
- Inspect individual speaker wire connections for continuity and shorts.
- Iċċekkja s-settings tal-bilanċ u l-fader fuq l-unità ewlenija tiegħek.

If troubleshooting steps do not resolve the issue, contact PAC technical support or a professional installer.

6. Speċifikazzjonijiet

Karatteristika	Speċifikazzjoni
Numru tal-Mudell	APH-CH01
Brand	PAC
Tip ta' Prodott	Xedd tal-Konnessjoni tal-Ispeaker
Tul	18 pulzier (madwar)
Materjal	Wajers tar-ram
Kompatibilità	Select Chrysler/Dodge vehicles with factory amplified systems (verify specific vehicle compatibility with PAC resources)
Dimensjonijiet (L x W x H)	8.5 x 8.5 x 1 inches (packaging/overall product)
Piż	0.37 Liri / 5.9 uqija

7. Garanzija u Appoġġ

PAC products are designed for reliability and performance. For specific warranty information regarding the APH-CH01 harness, please refer to the official PAC website or contact their customer support directly. Warranty terms typically cover defects in materials and workmanship for a specified period from the date of purchase.

For technical assistance, installation questions, or to report issues, please visit the PAC website or contact their customer support team. Have your product model number (APH-CH01) and purchase information ready when contacting support.

Note: PAC is not responsible for installation errors or damage caused by improper installation. Professional installation is recommended.

	Gwida għall-Istruzzjonijiet tal-Arness PAC LPH Gwida komprensiva għall-arnessi PAC LPH u APH għall-integrazzjoni tas-suq ta' wara l-użu ampliferifikaturi u proċessuri tal-awdjo f'sistemi awdjo tal-karozzi tal-fabbrika, fejn jiġu ddettaljati l-konnessjonijiet tal-wajers, l-applikazzjonijiet, u l-kompatibilità tal-vetturi għal diversi marki tal-karozzi.
	Ċineg tat-T Avvanzati PAC LOC PRO u Ċineg tal-Awdjo APH għall-Integrazzjoni tal-Awdjo tal-Vetturi Gwida komprensiva għall-PAC LOC PRO Advanced T-Harnesses u l-APH Harnesses, iddisinjati biex itejbu s-sistema tal-ħoss tal-vettura tiegħek filwaqt li jżommu r-radju tal-fabbrika. Dan id-dokument jelenka l-vetturi kompatibbli, in-numri tal-partijiet, u jipprovdi eżempji tas-sistema.amples għal integrazzjoni awdjo bla xkiel.
	Ċineg tal-Konnessjoni tal-Ispeaker PAC APH-CH03 għal Vetturi Magħżula Gwida dettaljata għall-konnessjoni tal-ispiker PAC APH-CH03, li tippermetti bejgħ ta' wara l-bejgħ bla xkiel ampInstallazzjoni ta' rinfurzatur f'vetturi magħżula Alfa Romeo, Chrysler, Dodge, Jeep, Maserati, u Ram bil-fabbrika ampSistemi tal-ħoss immodifikati. Jinkludi passi ta' installazzjoni, mapep tal-wajers, u appoġġ tekniku.
	PAC APH-CH42 AmpDijagramma tal-Wajers tal-Arness Pro u Gwida għall-Installazzjoni Dijagrammi dettaljati tal-wajers u struzzjonijiet għall-installazzjoni tal-PAC APH-CH42 AmpPro Harness f'vetturi Chrysler, Dodge, u RAM magħżula mill-2021 'il quddiem, b'sistema tal-fabbrika jew mingħajrha amplifier, biex tintegra sistema awdjo aftermarket.
	APH-FD01 AmpGwida għall-Installazzjoni tal-Arness PRO - PAC Dijagramma dettaljata tal-installazzjoni u gwida għall-PAC APH-FD01 AmpĊineg PRO, li jippermetti l-użu ta' wajers tal-ispikers tal-fabbrika għall-integrazzjoni tas-sistema awdjo aftermarket f'vetturi magħżula.
	Ċineg tal-Konnessjoni tal-Ispeaker PAC APH-TY02 għal Vetturi Toyota u Lexus Gwida għall-installazzjoni u l-wajersview għall-wajers tal-konnessjoni tal-ispiker PAC APH-TY02, iddisinjati għal vetturi Toyota u Lexus magħżula b'wajers tal-fabbrika amplifiers u konnettur Dock-n-Lock ta' 30 pin.

PAC APH-CH01