AT&T CL82257

AT&T CL82257 DECT 6.0 Cordless Phone System User Manual

Model: CL82257 | Brand: AT&T

1. Nibdew

1.1 Kontenut tal-Pakkett

Ivverifika li l-pakkett tiegħek fih l-oġġetti li ġejjin:

1.2 Installazzjoni tal-batterija

Before using the phone, install the battery pack in each cordless handset.

  1. Iftaħ l-għatu tal-kompartiment tal-batterija fuq in-naħa ta' wara tal-idejn.
  2. Plug the battery pack connector securely into the jack inside the compartment.
  3. Place the battery pack with the label UP as indicated.
  4. Agħlaq l-għatu tal-kompartiment tal-batterija.
  5. Place the handset in the charger to charge for at least 16 hours before first use.
AT&T CL82257 Handset with battery compartment visible

Image: A cordless handset with its battery compartment open, showing the battery pack being inserted. This illustrates the battery installation process.

1.3 Base Unit and Charger Connection

Connect the base unit and chargers to power and the telephone line.

  1. Ipplaggja tarf wieħed tal-korda tal-linja tat-telefon fil-jack TEL LINE fuq wara tal-unità bażi.
  2. Ipplaggja t-tarf l-ieħor tal-korda tat-telefon f'ġakk tat-telefon tal-ħajt.
  3. Plug the small end of the base unit power adapter into the POWER jack on the back of the base unit.
  4. Plug the large end of the base unit power adapter into an electrical outlet not controlled by a wall switch.
  5. For each charger, plug the small end of the charger power adapter into the POWER jack on the back of the charger.
  6. Plug the large end of the charger power adapter into an electrical outlet not controlled by a wall switch.
AT&T CL82257 Base Unit and Handset Chargers connected to power and telephone line

Image: The AT&T CL82257 base unit and two handsets in their respective chargers. The base unit shows connections for the telephone line and power adapter, illustrating proper setup.

1.4 Reġistrazzjoni tal-Handset

Your handsets are pre-registered to the base unit. If a handset displays "To register HS, see manual" or if you purchase additional handsets, you will need to register them.

  1. Place the unregistered handset in the base unit charger.
  2. Agħfas u żomm il- ISSIB SA button on the base unit for about 4 seconds until the FL-UŻU light on the base unit turns on.
  3. Filwaqt li l- FL-UŻU id-dawl ikun mixgħul, agħfas il-buttuna # ċavetta fuq l-idejn.
  4. The handset will display "Registering..." and then "Handset Registered" when complete.

2. Operazzjonijiet Bażiċi

2.1 Tagħmel u Riċeviment Sejħiet

Biex tagħmel sejħa:

Biex tirċievi telefonata:

Biex ittemm sejħa:

2.2 Sistema ta' Tweġiba Diġitali

The answering system can record up to 22 minutes of messages, announcements, and memos. It features a voice guide for easy setup and operation.

2.3 Smart Call Blocker

The Smart Call Blocker helps screen unwanted calls. It can block up to 1,000 names and numbers.

2.4 Intercom

You can use the handsets to communicate with each other.

2.5 ID ta' min iċempel

The phone stores the Caller ID information of the last 50 incoming calls.

3. Kura u Manutenzjoni

Proper care ensures the longevity of your phone system.

4. Gwida għas-soluzzjoni tal-problemi

If you experience issues with your phone system, refer to the table below for common problems and solutions.

ProblemaSoluzzjoni
L-ebda ton tal-arloġġ
  • Ensure the telephone line cord is securely connected to the base unit and wall jack.
  • Verify the base unit power adapter is plugged into a working electrical outlet.
  • Iċċekkja jekk telefowns oħra fuq l-istess linja humiex qed jaħdmu.
Il-mowbajl mhux qed jiċċarġja
  • Ensure the handset is properly seated in the charger.
  • Verify the charger power adapter is plugged into a working electrical outlet.
  • Clean the charging contacts on the handset and charger with a dry cloth.
  • Check battery pack connection inside the handset.
Kwalità tal-ħoss fqira / Statika
  • Mexxi l-idejn eqreb lejn l-unità bażi.
  • Relocate the base unit away from other electronic devices (e.g., microwave ovens, computers).
  • Iċċekkja l-korda tal-linja tat-telefon għal ħsara.
Handset displays "To register HS, see manual"
  • Follow the handset registration steps in Section 1.4.
Answering system not recording messages
  • Ensure the answering system is turned ON.
  • Iċċekkja jekk il-memorja hijiex mimlija; ħassar messaġġi qodma jekk meħtieġ.

5. Speċifikazzjonijiet Tekniċi

6. Informazzjoni dwar Garanzija

This product is offered as an Amazon Renewed item. Amazon Renewed products are professionally inspected and tested to work and look like new. They are eligible for replacement or refund under the Amazon Renewed Guarantee if you are not satisfied with your purchase. Please refer to the Amazon Renewed Guarantee terms and conditions for specific details regarding coverage and duration.

7. Appoġġ għall-Klijent

For technical assistance, troubleshooting beyond this manual, or warranty claims related to your Amazon Renewed AT&T CL82257 phone system, please contact Amazon Renewed customer support. You can typically find support contact information through your Amazon order history or the Amazon Renewed program page.