1. Introduzzjoni
This manual provides instructions for the installation, operation, and maintenance of the Danfoss DEVIwet #088U2001 Temperature Controller. This device is designed for precise temperature regulation, featuring a clear DEVI DEVIWET display for user interaction.
2. Informazzjoni dwar is-Sigurtà
Please read these safety instructions carefully before installing or operating the device. Failure to follow these instructions may result in property damage, injury, or death.
- L-installazzjoni għandha titwettaq minn elettriċista kwalifikat skont il-kodiċijiet u r-regolamenti elettriċi lokali.
- Kun żgur li l-provvista tal-enerġija tkun skonnettjata qabel kwalunkwe xogħol ta' installazzjoni, manutenzjoni jew tiswija.
- Tesponix l-apparat għal umdità jew temperaturi estremi.
- Do not attempt to open or repair the device yourself. Contact qualified service personnel.
- Żomm il-materjali tal-ippakkjar 'il bogħod mit-tfal.
3. Prodott Aktarview
The DEVIwet #088U2001 is a wall-mounted temperature controller with a digital display and touch controls. It is designed for accurate temperature management in various environments.
Figura 1: Quddiem view of the Danfoss DEVIwet #088U2001 Temperature Controller. The device is white, square, and features a central digital display showing "21.5°" with up/down arrows and a heating icon. A back arrow and the DEVI logo are also visible.
Figura 2: The Danfoss DEVIwet #088U2001 Temperature Controller mounted on a light grey wall. This image provides a perspective of the device's size and appearance in a typical installation setting.
Figura 3: A close-up view of the DEVIwet #088U2001's digital display. The display shows "21.5°" in red, along with touch-sensitive up and down arrows, a heating symbol, and a back arrow. The DEVI logo is located at the bottom right of the display area.
Karatteristiċi ewlenin:
- Original DEVI DEVIWET display
- Interface tal-kontroll touch
- Battery-powered operation (also supports 230V)
- Display LCD backlit
4. Setup u Installazzjoni
This section outlines the general steps for setting up your DEVIwet #088U2001 Temperature Controller. For detailed wiring diagrams and specific installation requirements, refer to the separate installation guide provided with the product or consult a qualified electrician.
4.1 Provvista tal-Enerġija
The device can be powered by batteries or connected to a 230 Volts AC power supply. Ensure the correct power source is used and all connections are secure.
- Installazzjoni tal-batterija: Open the battery compartment (typically on the rear or side) and insert the required batteries, observing polarity.
- Konnessjoni bil-fili: Connect the 230V power supply wires to the designated terminals inside the unit. This step requires professional installation.
4.2 Immuntar
Mount the controller on a flat, vertical surface, away from direct sunlight, drafts, or heat sources that could affect temperature readings. Use appropriate screws and wall plugs for secure mounting.
5. Istruzzjonijiet Operattivi
The DEVIwet #088U2001 features a user-friendly touch control interface and an LCD display.
5.1 Display Overview
The LCD display shows the current temperature, set temperature, heating status, and other operational indicators. The backlight activates upon touch for improved visibility.
5.2 Issettjar tat-Temperatura
- Touch the display to activate the backlight and controls.
- Uża l- Up (⌃) u Down (⌄) arrows on the screen to adjust the desired temperature.
- The new set temperature will be saved automatically after a few seconds of inactivity, or you can press the Lura (↶) arrow to confirm and exit.
5.3 Indikatur tat-Tisħin
A heating symbol (≈) will appear on the display when the controller is actively calling for heat to reach the set temperature.
6. Manutenzjoni
Manutenzjoni regolari tiżgura prestazzjoni ottimali u lonġevità tal-kontrollur tat-temperatura tiegħek.
6.1 Tindif
Imsaħ id-displej u ċasing b'wiċċ artab, niexef, jew kemxejn damp cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the surface and internal components.
6.2 Sostituzzjoni tal-batterija
If the device is battery-powered, replace batteries when the low battery indicator appears on the display. Use only the specified battery type. Dispose of old batteries responsibly.
7 Issolvi l-problemi
If you encounter issues with your DEVIwet #088U2001, refer to the following common problems and solutions:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-displej huwa vojt jew ma jirrispondix. | Ebda enerġija jew batteriji mejta. | Check power supply connection or replace batteries. |
| Il-qari tat-temperatura jidher li mhux preċiż. | Controller located near heat/cold source or draft. | Relocate the controller to a more representative area. Ensure proper sensor connection if external sensor is used. |
| Is-sistema tat-tisħin ma tirrispondix. | Wiring issue, heating system fault, or set temperature is below ambient. | Verify wiring connections. Check the heating system's power and functionality. Increase the set temperature above the current room temperature. |
Jekk il-problema tippersisti wara li tipprova dawn is-soluzzjonijiet, ikkuntattja persunal tas-servizz kwalifikat.
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | DEVI |
| Numru tal-Mudell | DEVIwet #088U2001 |
| Dimensjonijiet (L x W x H) | 19 x 12 x 12 ċm |
| Piż | 81.65 gramma |
| Voltage | 230 Volts |
| Sors tal-Enerġija | Mħaddma bil-batterija |
| Karatteristiċi Speċjali | Touch Control, Battery Operated, Backlight |
| Tip ta 'Wiri | LCD |
| Tip ta' Kontrollur | Push-button, Touchpad Control |
9. Garanzija u Appoġġ
Information regarding product warranty and specific support contacts is not available in the provided product data. Please refer to the documentation included with your purchase or visit the official DEVI website for warranty details and customer support options.
