1. Prodott Aktarview
This manual provides instructions for the installation, operation, and maintenance of the Commercial Electric Slim Spot 4 inch 3000K Soft White Canless LED Recessed Kit. This product is designed for general lighting applications in residential and commercial environments, offering efficient and long-lasting illumination without the need for a traditional recessed housing.
2. Informazzjoni dwar is-Sigurtà
Read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.
- TWISSIJA: Riskju ta' xokk elettriku. Skonnettja l-enerġija fil-fjus jew circuit breaker qabel l-installazzjoni jew is-servizz.
- TWISSIJA: Risk of fire. Use only in circuits rated for 120V AC.
- L-installazzjoni għandha titwettaq minn elettriċista kwalifikat jew minn persuna familjari mal-kostruzzjoni u t-tħaddim tal-prodott u l-perikli involuti.
- Ensure all electrical connections are made in accordance with local codes and ordinances, and the National Electric Code (NEC).
- Do not install in wet locations or directly expose to water. Suitable for damp postijiet.
- Timmodifikax l-apparat. Kwalunkwe modifika tista' tħassar il-garanzija u toħloq perikli għas-sigurtà.
- Do not handle live wires with bare hands.
3. Kontenut tal-Pakkett
Verify that all components are present before installation. If any part is missing or damaged, contact customer service.
- 1 x 4-inch Canless LED Recessed Light Fixture
- 1 x Junction Box (Driver included)
- 1 x Manwal ta 'Istruzzjoni
4. Setup u Installazzjoni
Follow these steps for proper installation. Ensure power is OFF at the circuit breaker before proceeding.
- Itfi l-Enerġija: Locate the circuit breaker controlling the light fixture location and turn it OFF. Verify power is off using a voltagtester.
- Aqta’ Toqba fis-Saqaf: Using the provided template (if applicable) or the fixture's dimensions, cut a 4.25-inch (approximately) diameter hole in the ceiling drywall. Ensure there are no obstructions (joists, pipes, wires) in the ceiling space.
- Kaxxa tal-Ġunzjoni Miftuħa: Open the cover of the provided junction box. Remove the appropriate knockout(s) for your electrical wiring.
- Qabbad il-Wiring: Insert the electrical supply cable into the junction box through the knockout. Secure the cable with a cable connector. Connect the house wiring to the fixture's junction box wires:
- Qabbad il- iswed wire (Live) from the house to the iswed wire of the junction box.
- Qabbad il- abjad wire (Neutral) from the house to the abjad wire of the junction box.
- Qabbad il- aħdar or bare copper wire (Ground) from the house to the aħdar wire of the junction box.
- Agħlaq il-Kaxxa tal-Ġunzjoni: Close the junction box cover and secure it.
- Place Junction Box: Place the junction box through the cut-out hole into the ceiling space.
- Connect Fixture to Junction Box: Connect the male/female connectors from the LED fixture to the junction box. Ensure a secure connection.
- Installa Fixture: Push the spring clips on the LED fixture upwards and insert the fixture into the ceiling hole. The spring clips will hold the fixture securely in place against the ceiling.
- Irrestawra l-Enerġija: Erġa' ixgħel il-kurrent mis-circuit breaker.
- Dawl tat-Test: Ittestja l-apparat tad-dawl biex jiżgura li qed jaħdem sew.
5. Istruzzjonijiet Operattivi
The Commercial Electric Slim Spot LED Recessed Kit operates like a standard light fixture. Once installed and powered, it can be controlled by a wall switch connected to the circuit.
- Tixgħel/Jitfi: Uża s-swiċċ tal-ħajt konness biex tixgħel jew titfi l-apparat tad-dawl.
- Dimming (jekk applikabbli): If connected to a compatible dimmer switch, the light output can be adjusted. Refer to your dimmer switch's instructions for proper operation.
6. Manutenzjoni
The Commercial Electric Slim Spot LED Recessed Kit requires minimal maintenance.
- Tindif: Ensure power is OFF before cleaning. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or electrical components.
- LEDs: Is-sors tad-dawl LED huwa integrat u ddisinjat għal ħajja twila. Ma jistax jiġi sostitwit mill-utent.
7 Issolvi l-problemi
If the fixture does not operate correctly, refer to the following troubleshooting guide:
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. |
|
|
| Light flickers or dims intermittently. |
|
|
| Id-dawl mhux qawwi daqs kemm mistenni. |
|
|
8. Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Brand | Kummerċjali elettriċi |
| Mudell | Slim Spot 4 in. Canless LED Recessed Kit |
| Piż tal-oġġett | 2.56 liri |
| Dimensjonijiet tal-Pakkett | 5.75 x 5.67 x 3.98 pulzieri |
| Stil | Moderna |
| Kulur | Abjad |
| Materjal | Ram |
| Numru ta' Dwal | 1 |
| Voltage | 120 Volts |
| Direzzjoni tad-Dawl | LED |
| Sors tal-Enerġija | Corded Elettriku |
| Tip ta 'Bozza | LED (Integrat) |
| Temperatura tal-Kulur | 3000K Abjad artab |
| ASIN | B07R4RD22P |
9. Garanzija u Appoġġ
For warranty information or technical support, please refer to the documentation included with your purchase or contact Commercial Electric customer service. Keep your proof of purchase for warranty claims.
Note: Specific warranty terms may vary. Please consult the official Commercial Electric website or your retailer for the most current warranty details.





