Introduzzjoni
This manual provides instructions for the installation, operation, and maintenance of your Commercial Electric 24-inch 4000K 1900-Lumen 120-Volt White Integrated LED Wraparound Light. Please read these instructions carefully before installation and retain them for future reference.
Image: The Commercial Electric 24-inch Integrated LED Wraparound Light, showcasing its sleek, white design and prismatic lens.
Informazzjoni dwar is-Sigurtà
TWISSIJA: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. Consult a qualified electrician if you are not familiar with electrical installations.
- Ensure all connections are made correctly and securely.
- Dan l-apparat huwa ddisinjat għall-użu fuq ġewwa biss.
- Tippruvax timmodifika l-apparat. Kwalunkwe modifika tista' tħassar il-garanzija u toħloq periklu għas-sigurtà.
- Ilbes nuċċalijiet u ingwanti tas-sigurtà waqt l-installazzjoni.
Kontenut tal-Pakkett
Iċċekkja li l-komponenti kollha huma preżenti qabel tibda l-installazzjoni.
- 1 x Commercial Electric 24 in. Integrated LED Wraparound Light
- Ħardwer tal-Immuntar (viti, ġewż tal-wajer)
- Manwal ta' Istruzzjoni
Image: The product packaging for the Commercial Electric 24-inch LED Wraparound Light, indicating the contents and model information.
Setup u Installazzjoni
This fixture is designed for semi-flush mount installation on a ceiling. Ensure the power is OFF at the circuit breaker before proceeding.
- Ipprepara ż-Żona tal-Installazzjoni: Turn off power at the main circuit breaker. Ensure the mounting surface is structurally sound to support the fixture.
- Remove Diffuser and Mounting Plate: Carefully remove the prismatic lens diffuser from the fixture. Locate and detach the mounting plate from the fixture body.
- Immarka Toqob tal-Immuntar: Hold the mounting plate against the ceiling in the desired location. Mark the positions for the mounting screws.
- Installa Pjanċa tal-Immuntar: Drill pilot holes if necessary. Secure the mounting plate to the ceiling using the provided mounting hardware.
- Konnessjonijiet elettriċi:
- Qabbad il- iswed wajer mill-apparat sal- iswed (live) wire from the junction box.
- Qabbad il- abjad wajer mill-apparat sal- abjad wajer (newtrali) mill-kaxxa tal-junction.
- Qabbad il- aħdar or bare copper wire from the fixture to the aħdar jew wajer tar-ram (tal-ert) mikxuf mill-kaxxa tal-junction.
- Assigura l-konnessjonijiet kollha bil-ġewż tal-wajer.
- Waħħal il-Korp tal-Apparat: Carefully align the fixture body with the mounting plate and secure it using the screws provided. Ensure no wires are pinched.
- Reinstall Diffuser: Reattach the prismatic lens diffuser to the fixture body.
- Irrestawra l-Enerġija: Ixgħel il-qawwa lura fis-circuit breaker.
Istruzzjonijiet Operattivi
The Commercial Electric LED Wraparound Light is designed for simple operation.
- Once installed and power is restored, the light can be turned ON or OFF using a standard wall switch connected to the fixture's circuit.
- This fixture features integrated LEDs and does not require bulb replacement.
Manutenzjoni
This LED fixture is designed to be maintenance-free. However, occasional cleaning may be required.
- Tindif: Ensure the power is OFF before cleaning. Use a soft, dry, or slightly damp cloth to wipe the exterior surfaces of the fixture and the prismatic lens. Do not use abrasive cleaners or solvents, as these may damage the finish or lens.
- Ebda Sostituzzjoni tal-Bozza: The LEDs are integrated and are not user-replaceable. The fixture has a long operational life of approximately 50,000 hours.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| Id-dawl ma jixgħelx. | L-ebda qawwa għall-apparat. Konnessjoni tal-wajers sfużi. Swiċċ tal-ħajt difettuż. | Iċċekkja s-circuit breaker u s-swiċċ tal-ħajt. Ensure all wire connections are secure (power OFF first). Ittestja jew ibdel is-swiċċ tal-ħajt. |
| Teptip ħafif. | Konnessjoni tal-wajers sfużi. Swiċċ tad-dimmer inkompatibbli (jekk applikabbli). | Check and secure all wire connections (power OFF first). This fixture is not specified as dimmable; ensure it is connected to a standard ON/OFF switch. |
| L-output tad-dawl huwa baxx. | Dust or dirt on the lens. | Clean the prismatic lens with a soft, damp cloth (power OFF first). |
Speċifikazzjonijiet
| Numru tal-Mudell | WR2440K15LPL |
| Brand | Kummerċjali elettriċi |
| Dimensjonijiet | 28 x 6 x 3.6 pulzieri (Pakkett) |
| Piż | 2.84 liri |
| Sors tad-Dawl | LED integrat |
| Luminożità | 1900 Lumens |
| Temperatura tal-Kulur | 4000 Kelvin (abjad kiesaħ) |
| Voltage | 120 Volts |
| Sors tal-Enerġija | Corded Elettriku |
| Tip ta' Installazzjoni | Semi Flush Mount |
| Materjal | Plastik |
| Użu fuq ġewwa/barra | Ġewwa |
| It-Tistennija tal-Ħajja | 50,000 sigħat |
| Ċertifikazzjonijiet | ETL Listed, ENERGY STAR |
Garanzija
The product description mentions a "Limited" warranty type. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or contact Commercial Electric customer support.
Appoġġ għall-Klijent
For technical assistance, replacement parts, or general inquiries, please contact Commercial Electric customer service. Refer to the product packaging or the manufacturer's webis-sit għall-aktar informazzjoni ta' kuntatt aġġornata.
Riżorsi onlajn: You may find additional support and FAQs on the Commercial Electric official websit.
