1. Introduzzjoni
This manual provides detailed instructions for the setup, operation, and maintenance of your Zalman T6 ATX Mid Tower Computer PC Case. Please read this manual thoroughly before beginning installation to ensure proper assembly and optimal performance.
Karatteristiċi Ewlenin
- Optimized Cooling Performance: Hairline pattern front and side mesh design along with a 120mm rear fan provides optimal air circulation. Total of 4 fans can be installed, including on the side panel.
- Powder Coated Steel: The T6’s chassis is made of high strength steel sheets to withstand high pressure and heat. The black powder coating applied throughout the chassis is corrosion resistant.
- Versatile Layout: T6’s internal layout design provides great workspace for building various types of PC whether for a home workstation, office, or gaming. Will fit ATX, mATX, and mini-ITX motherboards.
- Bays and Ports: (2) 2.5” and (2) 3.5/2.5" drives, external bay for a 5.25" drive, I/O port with 1x USB 3.0, 2x USB 2.0, 1x Audio In, 1x Audio Out.
2. X'hemm fil-Kaxxa
- Zalman T6 ATX Mid Tower Computer PC Case (1 piece)
- Accessory kit (screws, standoffs, cable ties)
- Pre-installed 120mm rear fan
3. Setup u Installazzjoni
3.1. Prodott Aktarview
Ara dan il-filmat għal ħarsa ħafifaview of the Zalman T6 PC case.
Vidjo: Prodott Spiċċatview of the Zalman T6 ATX Mid Tower Computer PC Case.
3.2. Internal Layout and Component Compatibility
The Zalman T6 case offers a versatile internal layout to accommodate various PC components. Refer to the diagrams below for component placement and maximum dimensions.
Image: Internal dimensions of the Zalman T6 PC case, showing overall measurements (377mm length, 200mm width, 430mm height) and internal component clearances.
Image: Detailed internal layout of the Zalman T6, indicating maximum CPU cooler height (165mm) and VGA card length (280mm), along with drive bay locations.
Image: Diagram showing the placement of the power supply unit (Max 160mm) and compatible motherboard form factors (ATX, mATX, Mini-ITX) within the Zalman T6 case.
3.3. Installazzjoni tas-sewqan
The T6 case supports multiple storage drives. Install your 2.5" SSDs, 3.5" HDDs, and 5.25" optical drives into their designated bays.
Immaġni: View of the drive bays in the Zalman T6 case, showing mounts for two 2.5" drives, two 3.5/2.5" drives, and one external 5.25" optical drive bay.
3.4. Fan Installation and Airflow
The case comes with one pre-installed 120mm rear fan. Additional fans can be installed for enhanced cooling.
Image: Illustration of the optional 120mm side cooling fan mount on the side panel of the Zalman T6 case.
Image: Diagram showing fan placement options: one pre-installed 120mm rear fan, two optional 120mm front fans, and one optional 120mm side fan. Note: CPU cooler height is limited to 140mm if a side fan is installed.
4. Tħaddim tal-Kaxxa tal-PC
4.1. Il-Panel tal-I/O ta' Quddiem
The front I/O panel provides convenient access to essential controls and ports.
Image: Labeled diagram of the Zalman T6 front I/O panel, showing the Power button, Headphone jack, Microphone jack, USB 2.0 ports (x2), USB 3.0 port (x1), HDD & Power LED, and Reset button.
4.2. Ixgħel u Irrisettja
- Buttuna tal-Qawwa: Press to turn the computer on or off.
- Buttuna Irrisettja: Press to restart the computer. Use only when necessary.
4.3. Kontroll tal-veloċità tal-fann
The fan speed control switch allows adjustment of connected fans for optimal balance between cooling and noise levels.
5. Manutenzjoni
5.1. Tindif tal-Filtri tat-Trab
Regular cleaning of dust filters is crucial for maintaining optimal airflow and preventing dust buildup inside the case. Dust filters are typically located on the front, top, and bottom of the case. Gently remove and clean them with compressed air or water, ensuring they are completely dry before reinstallation.
6 Issolvi l-problemi
6.1. Kwistjonijiet Komuni
- Kompatibbiltà tal-motherboard: Caution: This case will not fit ATX motherboards with side-facing SATA ports. Ensure your motherboard's SATA port orientation is compatible before installation.
- Is-sħana żejda: Ensure all fans are properly installed and functioning. Check for dust buildup on filters and components. Verify correct airflow direction.
- Ebda Qawwa: Double-check all power connections from the power supply to the motherboard and components. Ensure the power supply switch is in the 'ON' position.
7. Speċifikazzjonijiet Tekniċi
| Karatteristika | Speċifikazzjoni |
|---|---|
| Brand | Zalman |
| Isem tal-Mudell | T6 |
| Numru tal-Mudell tal-Oġġett | T6 |
| Piż tal-oġġett | 8 liri |
| Dimensjonijiet tal-Prodott (LxWxH) | 7.87 x 16.93 x 14.84 pulzieri |
| Kulur | Iswed |
| Appoġġ tal-Motherboard | ATX, mATX, Mini-ITX |
| Drive Bays | (2) 2.5” and (2) 3.5/2.5" drives, (1) 5.25" external bay |
| Fannijiet installati minn qabel | 1x Fann ta' wara ta' 120mm |
| Appoġġ tal-fann | Up to 4 fans (1x Rear, 2x Front, 1x Side) |
| Max CPU Cooler Għoli | 165mm (140mm with side fan) |
| Tul Max tal-Kard VGA | 280mm |
| Portijiet I/O | 1x USB 3.0, 2x USB 2.0, 1x Audio In, 1x Audio Out |
| Karatteristiċi Speċjali | Built-In Fan, Dust Filter, USB 3.0 |
8. Garanzija u Appoġġ
Għal informazzjoni dwar il-garanzija u appoġġ tekniku, jekk jogħġbok irreferi għas-sit uffiċjali ta' Zalman webis-sit jew ikkuntattja s-servizz tal-konsumatur tagħhom. Żomm l-irċevuta tax-xiri tiegħek għal talbiet ta’ garanzija.
Zalman Uffiċjali Websit: www.zalman.com
