Introduzzjoni
This manual provides detailed instructions for the SHIDU Voice Amplifier 18W, Model HBXY002. This device is designed to amplify your voice clearly and can also function as a Bluetooth speaker. It is suitable for various indoor and outdoor activities, including teaching, presentations, fitness instruction, and tour guiding. Please read this manual thoroughly before using the product to ensure proper operation and longevity.
Kontenut tal-Pakkett
Malli tiftaħ il-pakkett, jekk jogħġbok ivverifika li l-oġġetti kollha li ġejjin huma inklużi:
- 1 x SHIDU Voice AmpSpeaker aktar ħaj
- 1 x Wired Headset Microphone
- 1 x Kejbil tal-Iċċarġjar (USB)
- 1 x Audio Cable (AUX)
- 1 x Waistband/Strap
- 1 x Manwal għall-Utent
Prodott Overview
The SHIDU Voice Amplifier features a robust design with multiple functionalities. Key features include:
- 18W High Fidelity High Volume: Jagħti ħoss ċar u qawwi.
- Batterija Percentage Display: LCD shows remaining battery life.
- Funzjoni tal-Bank tal-Enerġija: Built-in battery can charge other devices.
- IPX5 li ma jgħaddix ilma minnha: Designed with silicone cases and interfaces for water, shock, dust, and splash resistance.
- Speaker Bluetooth: Connects wirelessly to devices.
- Reġistratur: One-key recording function.
- Input Multipli: Supports Micro SD card, AUX input, and USB flash disk.
Setup
1. Iċċarġjar tal-Apparat
Before initial use, fully charge the voice amplifier. Connect the provided USB charging cable to the DC 5V port on the amplifier and to a standard USB power adapter (not included) or computer USB port. The battery percentage will be displayed on the screen. A full charge typically takes 3-5 hours.
2. Connecting the Headset Microphone
Insert the 3.5mm jack of the wired headset microphone into the MIC input port on the amplifier. Ensure it is securely connected. The headset is adjustable for comfort and can be worn as a headset, on shoulders, or held handheld.
3. Wearing the Ampaktar ħaj
Attach the provided waistband to the amplifier's loops. You can wear the amplifier around your waist or clip it to your belt or pocket using the detachable back clip. Position the microphone close to your mouth for optimal voice pickup.
Istruzzjonijiet Operattivi
1. Mixgħul/Mitfi u Kontroll tal-Volum
- Qawwa Mixgħul: Press and hold the Power switch/play/pause button.
- Itfi: Press and hold the Power switch/play/pause button again.
- Aġġustament tal-Volum: Use the "Previous/Volume-" and "Next/Volume+" buttons to adjust the amplivell ta ’kwalifikazzjoni.
2. Vuċi AmpModalità ta' lifikazzjoni
Once the microphone is connected and the device is powered on, speak into the microphone. Your voice will be amplified through the speaker. Ensure the microphone is positioned correctly to avoid feedback (a high-pitched squeal).
Important: To prevent noise/feedback, keep the microphone and speaker at a sufficient distance from each other.
3. Bluetooth Speaker Mode
To use the device as a Bluetooth speaker:
- Qawwa fuq il- ampaktar ħaj.
- Press the "Mode Key" button until you hear a voice prompt indicating "Bluetooth mode".
- Ippermetti l-Bluetooth fuq l-apparat mobbli tiegħek (smartphone, tablet, laptop).
- Fittex għal "SD-M800" in your device's Bluetooth settings and connect. You will hear a voice prompt "Bluetooth is connected" upon successful pairing.
- You can now play audio from your device through the SHIDU ampaktar ħaj. Il amplifier supports simultaneous microphone input and music playback.
4. Funzjoni ta' Reġistrazzjoni
Il- amplifier features a one-key recording function. Insert a Micro SD card or USB flash drive into the respective port. Press the "Recording" button to start recording your voice or audio. Press it again to stop recording.
5. Użu bħala Power Bank
The built-in 4400mAh battery can be used to charge other devices. Connect your device's charging cable to the USB port on the amplifier. The battery level is displayed on the LCD screen.
6. Input AUX
Connect an external audio source (e.g., MP3 player) to the AUX port using the provided audio cable. The amplifier will play audio from the connected device.
Manutenzjoni
- Tindif: Imsaħ l-apparat b'ċarruta ratba u niexfa. Tużax kimiċi ħarxa jew prodotti tat-tindif li joborxu.
- Ħażna: Aħżen il- amplifier f'post frisk u niexef 'il bogħod mix-xemx diretta u minn temperaturi estremi.
- Kura tal-batterija: Biex ittawwal il-ħajja tal-batterija, evita li tiċċarġja kompletament il-batterija ta' spiss. Iċċarġja l-apparat regolarment, anke jekk ma jkunx qed jintuża għal perjodi twal.
- Reżistenza għall-Ilma: While IPX5 waterproof, avoid submerging the device in water. Ensure all port covers are securely closed when exposed to moisture.
Issolvi l-problemi
| Problema | Kawża Possibbli | Soluzzjoni |
|---|---|---|
| L-ebda ħoss mill-kelliem | Device is off; low battery; microphone not connected; volume too low. | Ensure device is powered on; charge the battery; connect microphone securely; increase volume. |
| High-pitched feedback (squealing) | Microphone too close to the speaker; volume too high. | Increase distance between microphone and speaker; lower the volume. |
| Nuqqas ta' pairing Bluetooth | Bluetooth mode not activated; device not discoverable; incorrect pairing name. | Tiżgura amplifier is in Bluetooth mode; check your device's Bluetooth settings; search for "SD-M800". |
| Ir-reġistrazzjoni mhux qed taħdem | No Micro SD card/USB drive inserted; card/drive full or corrupted. | Insert a compatible Micro SD card or USB drive; ensure it has free space and is formatted correctly. |
| Il-power bank mhux qed jiċċarġja l-apparat | Amplifier battery low; incorrect cable; device not compatible. | Iċċarġja l- amplifier; use the correct charging cable for your device; ensure your device supports USB charging. |
Speċifikazzjonijiet
| Karatteristika | Dettall |
|---|---|
| Numru tal-Mudell | HBXY002 |
| Qawwa tal-Ħruġ | 18W |
| Kapaċità tal-batterija | 3.7V, 4400mAh Lithium-ion |
| Iċċarġjar Voltage | 5V, 1A |
| Ħin tal-Iċċarġjar | 3-5 sigħat |
| Ħin tax-Xogħol | 10-12 hours (depending on volume) |
| Teknoloġija tal-Konnettività | AUX, Bluetooth |
| Input Awdjo | AUX |
| Apparati Kompatibbli | Bluetooth-enabled devices (smartphones, laptops, tablets) |
| Materjal | Silikonju |
| Piż tal-oġġett | 388 Gramm |
| Reżistenza għall-Ilma | IPX5 (splash, rain, sand, dust, shock resistant) |
| UPC | 750076148716 |
Garanzija u Appoġġ
For warranty information and customer support, please refer to the documentation provided with your purchase or contact SHIDU customer service directly. Keep your purchase receipt as proof of purchase.
The product is manufactured by SHIDU in China.
Intended Use Cases
This voice amplifier is recommended for:
- Teachers and educators
- Singers and performers
- Presenters and public speakers
- Fitness instructors and coaches
- Tour guides
- Individuals with soft voices or conditions like Parkinson's disease
- Outdoor activities where voice projection is needed
