uxcell Key Switch Lock Instruction Manual

Prodott Overview

The uxcell Key Switch Lock is a robust and reliable emergency switch designed for access control systems. It features a durable stainless steel panel and a key-operated mechanism, providing secure on/off control for various applications, including gate and garage door openers.

Immaġni: Quddiem view of the uxcell Key Switch Lock, demonstrating its sleek stainless steel design and the key inserted into the lock cylinder. The "ON" and "OFF" positions are clearly marked.

Karatteristiċi ewlenin:

• Key is removable in both ON and OFF positions, offering flexible control.
• Universal compatibility with most gate and garage door openers.
• Constructed with a durable stainless steel plate designed to accommodate a standard 19mm (3/4") barrel.
• Rated Current: 4A 125V AC, 2A 250V AC, suitable for various electrical systems.
• Switch terminals are color-coded for easy recognition and wiring.

Setup u Installazzjoni

Proper installation is crucial for the safe and effective operation of your key switch lock. Please follow these steps carefully.

Għodda u Materjali Meħtieġa:

• Drill with appropriate drill bits (for 19mm / 3/4" cut hole and 4.5mm / 0.18" mounting holes).
• Screwdriver (for mounting screws).
• Wire strippers/crimpers.
• Multimeter (for verifying connections, optional but recommended).
• Nuċċalijiet u ingwanti tas-sigurtà.

Passi ta' Installazzjoni:

1. Ipprepara l-Wiċċ tal-Immuntar: Identify a suitable flat surface for mounting the switch panel. Ensure there is enough space behind the panel for wiring. The panel size is 115 x 70mm (4.53" x 2.76").
2. Drill Main Cut Hole: Using a 19mm (3/4") drill bit, create a circular cut hole for the key switch barrel.
3. It-Toqob tal-Immuntar tat-Tħaffir: Mark and drill two 4.5mm (0.18") holes for the mounting screws. The distance between these holes is 83mm (3.27").

Image: Detailed dimensional drawing of the key switch panel, indicating the overall panel size, mounting hole diameter, and distance between mounting holes. Also shown are the two included keys and mounting screws.
4. Qabbad il-Wiring: The switch features DPST (Double Pole, Single Throw) contacts with 2 Normally Open (NO), 2 Normally Closed (NC), and 2 Common (COM) terminals. The wires are color-coded for easier identification. Connect the switch wires to your access control system according to its wiring diagram. The cable length is approximately 20mm (0.79").


Immaġni: Taħt view of the key switch, revealing the wiring harness connected to the switch mechanism. The 19mm barrel diameter is also indicated, showing the part that inserts into the mounting hole.

5. Immonta l-Iswiċċ: Insert the key switch barrel through the main cut hole. Align the panel's mounting holes with the drilled holes and secure the panel using the provided mounting screws.
6. Funzjonalità tat-Test: After installation, insert a key and turn it to the ON and OFF positions to ensure proper operation and verify that it controls the connected device as intended.

Warning: Always disconnect power to the circuit before performing any wiring or installation to prevent electrical shock.

Istruzzjonijiet Operattivi

Operating the uxcell Key Switch Lock is straightforward:

• To Activate (ON): Insert one of the provided keys into the lock cylinder. Turn the key clockwise to the "ON" position. The key can be removed in this position.
• To Deactivate (OFF): Turn the key counter-clockwise to the "OFF" position. The key can also be removed in this position.

The switch maintains its state (ON or OFF) until the key is used to change it. This ensures continuous control over the connected system.

Manutenzjoni

The uxcell Key Switch Lock is designed for low maintenance. Follow these guidelines to ensure its longevity:

• Tindif: Periodically wipe the stainless steel panel with a soft, damp cloth to remove dust and grime. Avoid abrasive cleaners or solvents that could damage the finish or markings.
• Kura Ewlenija: Keep the keys clean and free of debris. Avoid forcing the key if it feels stiff; a small amount of graphite lubricant can be applied to the keyhole if necessary, but avoid oil-based lubricants.
• Kontroll tal-Konnessjoni: Annually, or as needed, inspect the wiring connections behind the panel to ensure they remain secure and free from corrosion. Ensure power is disconnected before inspection.
• Protezzjoni Ambjentali: While the stainless steel panel offers good durability, avoid exposing the internal components to excessive moisture or extreme temperatures, which could affect performance.

Issolvi l-problemi

If you encounter issues with your uxcell Key Switch Lock, consider the following common problems and solutions:

If the problem persists after attempting these solutions, please contact uxcell customer support or a qualified electrician.

Speċifikazzjonijiet

Garanzija u Appoġġ

For warranty information and technical support regarding your uxcell Key Switch Lock, please refer to the official uxcell webis-sit jew ikkuntattja lis-servizz tal-konsumatur tagħhom direttament. Żomm l-irċevuta tax-xiri tiegħek għal kwalunkwe talba ta' garanzija.

Manifattur: uxcell

Informazzjoni ta' Kuntatt: Jekk jogħġbok żur il- uxcell Store on Amazon jew l-uffiċjal tagħhom webis-sit għad-dettalji ta' appoġġ l-aktar aġġornati.