Manwal tal-Utent tal-Kontrollur tad-Dawl tal-Obsidian NX Wing

1. Introduzzjoni

The Obsidian NX Wing is a compact and powerful USB control surface designed for the Obsidian ONYX lighting control platform. It provides tactile control over your lighting system, enhancing workflow and precision for professional lighting operators. This manual provides essential information for setting up, operating, and maintaining your NX Wing.

Figura 1: Obsidian NX Wing Lighting Controller. This image displays the top view of the NX Wing, showcasing its array of faders, buttons, rotary encoders, and the integrated touchscreen. The "NX WING" logo is visible on the lower right.

2. Setup

Follow these steps to set up your Obsidian NX Wing:

1. Installazzjoni tas-Softwer: Ensure the Obsidian ONYX software is installed on your PC (Windows operating system required). The NX Wing functions as a control surface for this software. A 64-universe ONYX license is typically included with the purchase of the NX Wing.
2. Qabbad USB: Connect the NX Wing to your PC using a standard USB cable. The device is designed for plug-and-play operation.
3. Qawwa Mixgħul: The NX Wing is typically powered via the USB connection. Once connected, the device should initialize.
4. Rikonoxximent tas-Softwer: Launch the ONYX software. The NX Wing should be automatically recognized as a control surface. Verify its status within the ONYX software settings.

3. Istruzzjonijiet Operattivi

The NX Wing provides a comprehensive set of controls for interacting with the ONYX lighting platform.

3.1 Control Layout Overview

• Faders: Ten 60mm faders are located on the left side of the unit, each accompanied by four assignable buttons. These are primarily used for intensity control, playback levels, or other assigned parameters.
• Encoders rotanti: Four large-format digital rotary encoders are positioned towards the top right. These are used for fine-tuning parameters, navigating menus, or adjusting values within the ONYX software.
• Multi-function Hotkeys: Eight multi-function hotkeys provide quick access to frequently used functions or custom macros.
• Buttuni tal-daqq: Ten playback buttons are available for triggering cues, sequences, or other playback elements.
• Internal Touchscreen: An integrated touchscreen provides visual feedback and additional control options, mirroring or extending the ONYX software interface.
• Master Go Section: Dedicated buttons for Go, Pause, Snap, and Release provide immediate control over cue lists and playbacks.
• Navigation and Edit Keys: Keys such as "Copy", "Undo", "Clear", "Move", "Delete", "Record", "Update", "Load", "Group", "Cue", "Enter", and "/Back" facilitate editing and navigation within the ONYX software.

3.2 Operazzjoni Bażika

Refer to the Obsidian ONYX software manual for detailed instructions on assigning functions to faders, buttons, and encoders. The NX Wing acts as a direct hardware interface for the software's capabilities.

• Kontroll tal-fader: Move faders up and down to adjust assigned parameters. The four buttons below each fader can be configured for various functions like flash, solo, or page changes.
• Encoder Use: Rotate encoders to change values. Pressing an encoder may activate an alternate function or confirm a selection.
• Funzjonijiet Hotkey: Utilize the hotkeys for quick access to common operations or custom commands defined in ONYX.
• Interazzjoni touchscreen: Interact with the touchscreen for direct manipulation of the ONYX graphical user interface.

4. Manutenzjoni

Proper maintenance ensures the longevity and optimal performance of your NX Wing.

• Tindif: Use a soft, dry, lint-free cloth to clean the surface of the unit. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device. Avoid abrasive cleaners or solvents.
• Ħażna: Store the NX Wing in a cool, dry environment, away from direct sunlight, extreme temperatures, and excessive dust. When transporting, use appropriate protective casing.
• Kura tal-Cable: Regularly inspect USB cables for damage. Replace any frayed or damaged cables to prevent connectivity issues.

5 Issolvi l-problemi

If you encounter issues with your NX Wing, refer to the following common solutions:

• Apparat Mhux Rikonoxxut:
  • Ensure the USB cable is securely connected to both the NX Wing and your PC.
  • Ipprova port USB differenti fuq il-PC tiegħek.
  • Verify that the ONYX software is running and up to date.
  • Check your PC's Device Manager to see if the NX Wing is listed and if there are any driver issues.
• Controls Unresponsive:
  • Restart the ONYX software.
  • Disconnect and reconnect the USB cable to the NX Wing.
  • Ensure no other applications are interfering with the USB connection or ONYX software.
• Kwistjonijiet tas-Software:
  • Consult the Obsidian ONYX software documentation or online support resources for software-specific problems.
  • Ensure your PC meets the minimum system requirements for the ONYX software.

6. Speċifikazzjonijiet

7. Garanzija u Appoġġ

For information regarding warranty coverage, technical support, or service, please contact Obsidian Control Systems directly or refer to their official websit. Żomm il-prova tax-xiri tiegħek għal talbiet ta' garanzija.

Obsidian Control Systems Official Websit: www.obsidiancontrol.com (Eżampil-link, il-link attwali jista' jvarja)