Ahuja UB-30 25W PA AmpManwal ta 'l-Utent aktar ħaj

Introduzzjoni

This manual provides essential instructions for the safe and efficient operation of your Ahuja UB-30 25W PA Amplifier. Jekk jogħġbok aqra dan il-manwal bir-reqqa qabel ma tuża l- amplifer u żommu għal referenza futura.

The Ahuja UB-30 is a compact 25W Public Address (PA) amplifier designed for various audio applications, offering versatile input and output options.

Istruzzjonijiet Importanti dwar is-Sigurtà

• Sors tal-Enerġija: Qabbad il- amplifier only to the specified AC mains voltage (220-240V, 50/60Hz) or a 12V DC car battery.
• L-ertjar: Ensure the equipment is properly earthed. Disconnect from mains before removing any covers.
• Ventilazzjoni: Timblokkax il-fetħiet tal-ventilazzjoni. Kun żgur li jkun hemm fluss tal-arja adegwat madwar l-unità biex tevita li tisħon iżżejjed.
• Umdità: Tesponix il- amplifier to rain or moisture to prevent fire or electric shock.
• Servizzi: Irreferi kull servizz lil persunal tas-servizz kwalifikat. Tippruvax tagħmel servizz ta' dan il-prodott int stess.
• Pjazzament: Poġġi l- amplifier on a stable, flat surface. Avoid placing it near heat sources or in direct sunlight.

Prodott Overview

The Ahuja UB-30 amplifier features multiple input channels and various speaker output options for flexible connectivity.

Figura 1: Quddiem view of the Ahuja UB-30 amplifier, showing the control panel and power cable.

Figura 2: Wara view of the Ahuja UB-30 amplifier, displaying the power input, fuse, and speaker output terminals.

Kontrolli u Konnessjonijiet

Kontrolli tal-Panew ta' Quddiem

Figura 3: Dettaljati view tal- amplifier's front panel, highlighting input jacks and control knobs.

• MIC-1 Input: Ġakk ta' 6.3mm għal input tal-mikrofonu.
• Kontroll tal-Volum MIC-1: Adjusts the volume level for MIC-1.
• MIC-2/AUX Input: 6.3mm jack for microphone or auxiliary input.
• Kontroll tal-Volum MIC-2/AUX: Adjusts the volume level for MIC-2 or AUX input.
• Kontroll tat-TON: Adjusts the tonal balance (bass/treble) of the output. Labeled 'CUT' to 'FLAT'.
• Swiċċ POWER: Jaqleb il- ampIl-qawwa tal-lifer ON/OFF.
• Indikatur tal-QAWWA: Jdawwal meta l- amplifier huwa mixgħul.

Konnessjonijiet tal-Panew ta' wara

Figura 4: Dettaljati view tal- amplifier's rear panel, showing power input, fuse, and speaker terminals.

• Input tal-Enerġija AC: Connects to 220-240V AC mains supply.
• Input ta' Enerġija DC: Terminals for 12V DC car battery connection. Observe polarity (+/-).
• DC FUSE: T 6A L fuse for DC power protection.
• Riżultati tal-Ispeaker: Screw terminals for connecting speakers. Options include COM (Common), 4Ω, 8Ω, 16Ω, and 100V line output.

Setup

1. Unboxing u Spezzjoni

Neħħi bil-galbu amplifier from its packaging. Inspect the unit for any signs of damage. Ensure all components are present.

2. Konnessjoni tal-Enerġija

The UB-30 can be powered by either AC mains or a 12V DC battery.

1. AC Mains (220-240V): Connect the provided AC power cord to the AC power input on the rear panel and then to a suitable wall outlet.
2. DC Battery (12V): For portable use, connect a 12V car battery to the DC input terminals on the rear panel. Ensure correct polarity: positive (+) to positive, negative (-) to negative.

Attenzjoni: Dejjem tiżgura l- amplifier is switched OFF before connecting or disconnecting power sources.

3. Konnessjoni tal-Ispeaker

Connect your speakers to the appropriate terminals on the rear panel. Match the speaker impedance to the amplifier's output impedance for optimal performance and to prevent damage.

1. Connect the common (negative) terminal of your speaker(s) to the COM terminal fuq il - ampaktar ħaj.
2. Connect the positive terminal of your speaker(s) to the 4Ω, 8Ω, jew 16Ω terminal, matching your speaker's impedance.
3. For 100V line speakers, connect to the 100V terminali u COM. Ensure your speakers are compatible with 100V line systems.

Importanti: Do not connect speakers to multiple impedance terminals simultaneously. Ensure all connections are secure.

4. Input Device Connection

1. Mikrofoni: Qabbad il-mikrofoni mal- MIC-1 u/jew MIC-2/AUX 6.3mm input jacks on the front panel.
2. Apparati Awżiljarji: Connect audio sources like smartphones, CD players, or laptops to the MIC-2/AUX input jack using an appropriate cable.

Istruzzjonijiet Operattivi

1. Tixgħel

1. Ensure all volume controls (MIC-1, MIC-2/AUX) are set to their minimum position (fully counter-clockwise).
2. Agħfas il- QAWWA switch on the front panel to the 'ON' position. The power indicator light will illuminate.

2. Volum ta 'aġġustament

1. For MIC-1, slowly turn the Kontroll tal-Volum MIC-1 clockwise until the desired sound level is achieved.
2. For MIC-2 or AUX input, slowly turn the MIC-2/AUX Volume Control clockwise until the desired sound level is achieved.
3. Avoid setting the volume too high, which can cause distortion or damage to speakers.

3. Aġġustament tat-Ton

Uża l- Kontroll tat-TON knob to adjust the frequency response of the amplifier. Turning it towards 'CUT' will reduce higher frequencies (treble), while turning it towards 'FLAT' will provide a more balanced, full-range sound.

4. Itfi

1. Turn all volume controls to their minimum position.
2. Agħfas il- QAWWA switch to the 'OFF' position. The power indicator light will turn off.

Manutenzjoni

Tindif

Imsaħ il-barra tal- amplifier with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.

Fuse Replacement (DC Fuse)

Jekk il- amplifier fails to power on when using DC battery power, the DC fuse may need replacement. The fuse is located on the rear panel.

1. Importanti: Disconnect all power sources (AC and DC) before attempting to replace the fuse.
2. Unscrew the fuse holder cap on the rear panel.
3. Remove the old fuse and replace it with a new fuse of the same type and rating (T 6A L).
4. Securely screw the fuse holder cap back into place.

Attenzjoni: Always replace fuses with the specified type and rating to prevent damage to the amplifier or risk of fire.

Issolvi l-problemi

Speċifikazzjonijiet

Figura 5: Size comparison of the Ahuja UB-30 amplifier, illustrating its compact dimensions.

Garanzija u Appoġġ

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Ahuja customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Manifattur: AHUJA